I used the transition for dynamic files tutorial and it works great.I only have a problem..ause it is dynamic i'm not able to use normal text, bgcolor and scrollable textfields in the external swf's and I want to
View 1 Repliesi read the Preloader and Transition for Dynamic Files tutorial by claudio and i tried to use twise in the project. it works fine, the buttons work, in fact i did not change the code in the tutorial_complete.fla, i did the same for the photos.fla, and it works fine, but when i published the tutorial_completes.wf, i came with these two problems:
when i click the photos button in the tutorial_complete.swf, it load the photos.swf, but the code in the photos.swf does not work. it tried to change the name of the instance names and the labels, but nothing. the effect in the main buttons is great, but there is a broblem in the in the photos.swf buttons. files zipped here:[URL]
This pertains to the Preloader and Transition for Dynamic Files tutorial here on kirupa.
I've used this tutorial many times before but now for the first time i am using navigation that is inside a movie clip. instead of directly on the stage. I'm having problems with the content loading it just always says loading. Is there something that i would have to change in the transition code or my button code? all the code for my buttons is inside of nav_mc movie clip. here is my fla. to take a look at
I've found this tutorial on kirupa.com and i can't use it in flash as3 ( its as2 source code) . Dont know how to transform it into as3.
[URL]
I've change _root. with MovieClip(root).
I can't do anything with this:
Code:
onClipEvent (enterFrame) { if (!loaded && this._url != _root._url) {
if (this.getBytesLoaded() == this.getBytesTotal()) {
loaded = true;
[code]....
I used the 'Preloader and Transition for Dynamic Files' Tutorial from the tutorials section
here is a link [URL] and have to say, I learned soooo much from it, and incorporated it into my website [URL]. How to put a percentage preloader for each of the sections when they load. The heavier the .swf file you are loading, the longer it takes, and I've gotten comments about this saying they would like to know how long they have to wait until they see something.
ANYONE KNOW HOW TO Preloader and Transition for Dynamic Files AND Transitions Between External SWFs MIX TOGHETER...
View 1 Replieswell this is gonna be a long big essay. So lets start. I used this tutorial to make a nice menu. I got some ideas by searching this forum. Finally came up with this (check the attached .fla) ... Allright, now umm...its really hard to explain. But i gotta explain this. lease Check the attached fla to get the idea of what I am talking here. You will notice that there are 3 buttons in the MAIN MENU. 1) Home 2 Forums. or the SUBMENU : I put 3 more buttons inside the forums_mc (look in the library) on frame 61. The buttons are 1) EXT MC 1 , 2) EXT MC 2, 3) EXT MC 3. I want to use these buttons to load external swf. I want to use the same logic used in the transition tutorial to make the intro and outro transitions. In addition to that, if I press any button on the MAIN MENU, the externally loaded swf should play outro transition and also collapse the SUBMENU. BUT (this is important) , if I press any button in the SUB MENU (like the button EXT MC 2) , then outro transition should play in the ext swf, but the SUB MENU SHOULD NOT PLAY THE OUTRO ANIMATION (which we want to do, when pressing any button on MAIN MENU).
Also the externally loaded swf should load in the emptycontainer movieclip inside the FORUMS_MC clipSo, got any ideas how to do this ???k the attached files. The above discription will only make sense if you see the .fla and other files attached. tried my best to do this, but could not succeed. Also, i asked many friends, but they are not able to do this...I am pretty sure that Masters like POM and Voetsjoeba, scotty and many others will be able to solve this problem.
I am working with the transitions tutorial: [URL]... Here is a link to the modified example im working on. [URL]...If you are familiar with this tutorial you will see this is familiar. Main movie checks to see if the specific section is at "midframe" if its not it waits and does nothing, then once you have transitioned to midframe and stopped it, click on the next section will then transition out and load the next movie. I am tring to do a little variation of it.
ok we have mainmovie2004.swf which has 4 buttons. Each button, section1, section2, section3, and section4 all load specific movies to "container" on the main timeline. Section1 button loads section1.swf, Section2 button loads section2.swf...etc. Well I have placed another set of buttons in each section (just section1 and 2 for example sake). Each button loads a specific movie into container_small (yeah I know it doesnt follow camelCode but thats the least of my concerns). I have been messing around with the code and I am able to get Section1 to load, then when I click on the first pink button in section1 it loads section1.1 which is (section1_1.swf). When I click on the next button it just reloads the same section no matter what. The other sections work because when you load section1 and click on any pink button the corresponding swf loads just doesnt ever transition out. The tree would like like this: {mainmovie2004.swf[section1.swf(section1_1.swf)]}.
I think the problem is the last frame of each sub section has an action that will load the next section. I need to get the path correct.
[code]...
First post. I was just going through Voetsjoeba's tutorial on making transitions between external swf's [URL]..
"If your buttons are not located on the main timeline, you will have to change the path to the container movieclip. In this example the buttons are located on the main timeline, therefore 'container' targets the container movieclip correctly. Though, if they are not on the main timeline, you must change container to the appropriate path."
I was wondering if anyone could elaborate on this. That is, how the path to the container movieclip would need to be changed in this situation. Apologies if the question is too vague.
I've done the tutorial "Uploading Files using FileReference" he actionscript is this:
import flash.net.FileReference;
var progressBar:MovieClip;
var reference:FileReference = new FileReference();
[code].....
[url]...
What I want is fade in/out on the transition instead of slide in/out. Plus this tutorial was done using tweening animation and timeline. [code]....
I am currently accomplishing this by switching between two NetStream, NetConnection, VideoPlayer combinations. The problem is that it is considerably cumbersome. Is there a better (easier) way of doing this? I looked into the play2() method, but it doesn't seem to have any way of overlapping the streams to create a seemless fade-in/fade-out.
View 1 RepliesI have tried replacing all of the class files with the tutorial specimen ones but i still get the error.
[Code]...
Now, not really understanding the error properly I paste dumped the files online for you to look at.
[Code]...
As the error still occured when using the specimen class files I really have no idea where to begin.
i want an action script or tutorial for dynamic text that follow the mouse..i seen some but it work only for plash player 5 and action script 1..so if any one can give me action or tutorial for flash cs3.
View 1 RepliesI've created a dynamic scrolling text box using the kirupa tutorial. It's the tutorial that uses self-made buttons to scroll up and down. In my movie I've got 7 buttons, when one is pressed I want to display different text in the text box. I have it working by loading text from .txt files but it is slow and does not allow me to format the text as I would like. What I'm thinking of doing is creating 7 keyframes on the timeline of the scrollable text. Then in each frame have the different text that I want displayed. When I click on a button it would go to one of those frames thus displaying the corresponding text. I can't get it to work. I've changed the text box to a static text box. I can't get it to move the playhead to the next frame in the text movie clip which the scrollable text box resides in.
View 2 RepliesI understand from reading various forums that if you do not embed the font in to the movie the dynamic field
won't fade with alpha. But when I try to enbed the font or setting embedFonts = true the text just disappears.
I have the text now with a tween just to show that the tween is working while the alpha is not.
This is the link to the SWF:
[Code]...
I'm working with dynamic streaming transitions and I would know how to stop a manual switch transition. Ocasionally I want to let the user change the quality of the streaming while another request its working. The actual result is that the requests succeded in cascade, and it would be nice to be able of stoping or canceling an actual change.
View 1 RepliesI've been experimenting with Dynamic Streaming while in the process of writing a tutorial. The documentation is quite clear on a few points: The keyframe interval in the various encodings should be shortThe bufferlength should be at least 2x the keyframe intervalThe player should sense a bandwidth change, by default, within the 4-second sampling interval and call for a switch. Then, the switch could take as long as 2x the keyframe interval after that. What I'm finding is wildly different behavior than this. It takes anywhere from 10-15 seconds for the player to notice the change and call for a switch, then another 20-40 seconds for the switch to happen. When switching up to a higher bitrate stream, this just means the user gets low bitrate video for longer than they ought to. But when switching down due to falling bandwidth, the buffer runs out and the user stares at the rebuffering sign for a lengthy time - long enough to give up on watching the video, for sure.
I've encoded an H.264 MP4 file at 64, 384, and 768 kbps, at 30fps and an "every 60 frames" keyframe interval. I've streamed it rtmp via two different CDNs that use FMS 3.5, into two different Flash video players (JW Player and Flowplayer). I've restricted my bandwidth on Windows XP with Netlimiter 2.0; and on the Mac with 'ipfw'. I've set bufferlength between 4 and 10 seconds. I've tested switching up and switching down. For up, I start with a 200kbps bandwidth limit. The video starts OK with the correct stream, then at 5 seconds I open up the bandwidth to unrestricted. For testing down, I do the opposite: start at unrestricted and then at 00:05 restrict to 200kbps.
My test page, with both players and sample code is at [URL] n-flash-bitrate-switching/ I also have a couple of screen recordings there showing the behavior of the whole process, both switching up and switching down. I thought I've done everything right here - paid attention to every documented detail, but it works rather poorly. Can someone explain whether this is expected behavior, if the players have implemented dynamic switching poorly, or if I'm doing something wrong?
I sent an email to pom regarding a tutorial that he wrote, but the email was bounced and he hasn't replied to my PM. I have followed both of pom's tutorials that involve experiments with perspective in Flash, but I have encountered a problem while attempting to duplicate a movie clip symbol in the second tutorial ([URL]). I have a single instance of the "ball" movie clip symbol appearing at random positions. However, I cannot seem to successfully duplicate the symbol instance at random positions using the loop that pom provided:
[Code]....
I have built a catalog in flash that was orginally built in InDesign and exported but it has some small content that is hard to read for the elderly users viewing it and I would like to add a zoom feature or some type of magnifying glass.
View 1 Repliesi found out when i add a dynamic mask to my preloader progress bar (for transition out) its not scaling correct. I think its because my bar isn�t tweening to the correct "stageWidth" during progress until it completes. I setted it up like that:
// Preloder Progress Bar
Code:
bar.scaleX = 0;
bar.graphics.beginFill(0xff3333,1);
bar.graphics.drawRect(0,0,stage.stageWidth,4);
[code]....
Somehow it looks like 100% of the loading progress doesn�t represent the entire stageWidth so my bar animation finishes some pixels before reaching stageWidth end. NowJust noticed it now after adding a dynamic mask to my preloaders progress bar.
I am looking for a tutorial called Senocular's 3D car race tutorial
View 1 Repliesoriginal: I really just need to figure out how to center the pictures. here is what I did I have modified the tutorial that I finished to have a bigger stage for bigger pictures. Everything is working properly but the pictures are displayed on the left side, I want to have them centered in the stage for the images, after clicking on the thumbnails, plus my images are different sizes as well. ranging from 200x410 to 744x410 but all are the same height of 410. i will post up what I am talking about at the end. I believe it is something within either the action script or the xml coding that allows the position of the image to be differently? please help here is what i am talking about[URL] Continued: Here is my coding in action script:
[Code]....
How can I add a Squeeze transition effect between frames using the transition manager class on a simple slideshow using the goBack and goForward functions in ActionScript3? Below is the code I have so far:
stop();
function goBack(event:MouseEvent):void
{[code].....
I'm having some problems with the XML/FLASH Photo Gallery Tutorial ([URL]). When I load the swf file into another movie the dynamic text will not display. Any thoughts to why this is happening.
View 1 Repliesi have a flex app that transitions between 2 states with the toggle of a button. my issue is that the effect of fading only seems to work on the 2nd transition and after. However, for my first transition... going from State1 to studyState... there is no fade effect whatsoever, in fact the components in state1 disappear completely (the footer fills the empty gap where the "body" use to be) and then the flex recreates the studyState (without any fade refilling the "body" with components only in studyState). After this first transition however, going between studyState and State1 working COMPLETELY fine.. why does this happen and how can i make it so that crossfade works STARTING FROM THE VERY FIRST TRANSITION?[code]
View 1 RepliesI have a presentation using the "presentation" template that comes with flash. I am trying to transition slides with the behavior slide transition options. but I've learned that it works find while going into a slide and doesn't go to the next slide when leaving.So basically I want it so that on right arrow first play out transition then go to next slide.
View 2 RepliesI am trying to create a page transition that will play a movieCLip transition into a page. and then it stops then when another button is pressed, it will play that transition out while loading the appropriate one. In the attached FLA, if you click on the red button first, the blue transition plays,
--red button code--
mybutton1.onRelease=function(){
_root.transitionClip.play();
}
and then stops on the stage. When you click the green button second,
--green button code --
mybutton2.onRelease=function(){
_root.transitionClip.play("out");
_root.transitionClip2.play();
}
it works correctly/ Playing out of the blue Transition and into the Red transition. However if I click it again it does the opposite, and just keep alternating.
If I add the
_root.transitionClip2.play("out");
to the first button then, nothing works right. I will eventually have more buttons, and may need to use a variable to control which "out" transitions is played, but how do I get the buttons to do this?I just want it to exit the current movie clip and play the "in" section of the desired clip.
i have looked everywhere for a tutorial on this - i have tried writing, and re-writing codes....i just cant get it. is there any tutorial i overlooked? here is what im looking to do - NO SHORTCUTS: have my main file that loads the buttons, my external swf container, my intro animations, and my swf "out" and "in" animations when a button is clicked i want it to point me to specific frame labels. i will have an "out" and "in" frame label and which will be the locations of the transitional starting points i want it to play the "out" transition, than unload the current swf, than play the in transition, than load the swf of the button that was clicked i want the animations to all be done using frame labels all within the MAIN swf file.... i have had no luck doing this....and i do NOT like the tween class....
View 10 RepliesWhen loading a file on PC, the location looks like this:
[Code]...
Is there a good work-around for this? Something short of adding a variable for the slash character that changes when a different OS is found? Also, I load XML that has links in it, so changing the links on the fly after they're loaded would be great.