I'm trying to use actionscript in a button to increment variables in my program. ie. when you click the button it increments a variable and so displays different information in one of my dynamic text boxes. The program doesn't seem to recognise the button input. I understand you have to give your button an instance name but I'm not sure how to set up the code to recognise this input.
View 3 RepliesI'm trying to use actionscript in a button to increment variables in my program. ie. when you click the button it increments a variable and so displays different information in one of my dynamic text boxes. The program doesn't seem to recognise the button input. I understand you have to give your button an instance name but I'm not sure how to set up the code to recognise this input. The code in my button is on (release) { buttonup++;} This is meant to increment a variable of that name but doesn't appear to work.
View 3 RepliesI have a movie which consists of 4 buttons( PLAY, PREVIOUS, NEXT and STOP)
[Code]...
These buttons work correctly and advance or reverse in sequencial order (slide1,slide2,slide3,slide4). However the movie can run from start to finish wihtout the use of the navigation. My problem is that if I let the movies run independently and then choose to use the next button while(for example) "slide3" is playing, the movie jumps to "slide1". Note that these slide labels are located within movieclip named "allunits" I know that the variable currentSlide is still equal to 1 thus returning the playhead to label "slide1".
I'm new to AS3 and programming in general and thought I could find some help here. I've tried researching and fixing this problem myself but I can't seem to figure it out.
I'm essentially making a version of Pong as a small project to get myself into programming using AS3. My problem is I've got the ball moving left towards the edge of the stage but I can't make it come back once it reaches the border.
I've an idea of what needs to be done, I need to make a function that sends the ball off to the side of the screen then have an if statement that detects when the ball reaches the border that then tells the ball to stop moving in that direction and move to the other side of the screen. [code]...
if I have a setup like this[code]...
I start the movie and it traces "null" which makes sense. But when I click on a button it doesn't trace the button name. I know the disconnect is at the point where I'm clicking the button. Is there a way to put a listener into the content movie clip that will run the code again when a button is clicked?
I have three movie clips that I am using as buttons. Their instances in the movie are Espanol_btn, Francais_btn and Deutsch_btn. I have added script to control the rollover and press/release states of the buttons, and now need to get the script to recognise which of the three buttons was pressed, store that result in the variable called lang (The posibilities are Espanol, Francais or Deutsch), and depending on what the variable land is, do different things. The script is below.how I can get this to work.
Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
var lang:String;[code].....
In my previous topic whitelynx_nivla gave me a code, which I edited. I'm using it to set variables when a certain key is pressed.But the loader can't access the variables and change them.[code]
View 0 RepliesRight, is it possible to change the varaible of an object within flash (5) through the use of a textbox? The reason being we're doing a group project with Flash and MaxMSP and when a video camera picks up movement, numbers will be sent from MaxMSP through to flash.
Thus, when these numbers "arrive" in flash I want them to trigger certain events. For instance (where this code resides in the movie clip: 'tree'):
Code:
onClipEvent(load){
if(textbox=5){
gotoAndPlay("grow");
}
}
Here, the idea is that when '5' is sent to flash a tree will grow and when 4 is sent something else will grow etc... However, because I don't want stuff growing all the time I need to change the variable of an object. I presume a textbox would be the easiest way of going about it
I am doing some server communication in AS3 / PHP / MySQL and I was wondering if there was a way to change a variable just before the user closes Flash?
Example: User closes browser or tab and Flash updates a variable before it closes the player.
I would like to be able to send the message to the server so that it knows that the user quit as it happens.
So I want to do saving and loading for variables. I.E. I want to save a variable by pressing the save button. When you use the "load" button, the variable is what it was when it was saved. I've tried this but it didn't work...
Code:
//Code on the frame
var saveState = SharedObject.getLocal("Cookie");
//Code on the save button
on (release) {
_root.save.gotoAndPlay(2);
savefile.data.blah = _root.blah;
savefile.flush();
}
//Code on the load button
on (release) {
gotoAndStop(3);
_root.blah = savefile.data.blah;
}
I have a movie clip button that has 3 states:up, over, out, and press.the action script inside the movie clip button looks like this:
stop();
onRollOver = function () {
this.gotoAndstop("_over");
[code]....
Code:
var showbutton="buttonone";
var currentpage="pageone";
[code]......
I'm trying to assign actions to various buttons for a website I am building, however I would also like to play a little movie first each time before linking to their individual different frames. The movie is the same for each button but then, obviously each button ultimately needs to link to a different frame. I'm guessing a nifty mix of gotoandPlay and variables are the answer but I'm getting myself in knots.
The structure of the site is as follows.On the main stage I currently have 4 frames. Each frame contains a different "page" of the website. The "home" frame has the navigation bar (including a sub-menu movie which has a number of buttons nested inside it which I think is going to be tricky). At the end of the "home" movie, there is a little fade animation which is labeled/ red flagged on the timeline - and it's this little animation I would like to have playing when a button is clicked on before linking to another frame.
At the moment the best I can manage is that when the button is clicked it goes back to the beginning of it's movie (a problem with the target paths perhaps?) as opposed to a label within the parent movie.I also think where I'm getting confused is exactly where I am supposed to define all the various variables and pieces of actionscript. The little snippits of code I have are as follows: Within the button I am trying to link, so far I have:
on(release){
_level0.frame_to_goto = "artwork";
play();
}
The "artwork" tag is the frame specific to that button (this is one of the sub-buttons that is nested within a submenu movie).Then in the movie for the webpage I have the following in the last frame of the mini animation that I want to play before the button links to the artwork frame:
stop();
if(_level0.frame_to_goto != undefined){
_level0.gotoAndPlay(_level0.frame_to_goto);
}else{
trace("An error as occured!");
}
The plan is to set up variables to react to a flashvars value like this:
[Code]...
There would be many mainVars (over 100, actually) and this setup isn't working.
The plan is to set up variables to react to a flashvars value like this:[code=html]<param name="flashvars" value="mainVars=1" />[/code]
[Code]...
There would be many mainVars (over 100, actually) and this setup isn't working.
The plan is to set up variables to react to a flashvars value like this:
Code:
<param name="flashvars" value="mainVars=1" />
Code:
var videoArray:Array;
var videoTitle:String;
var videoFile:String;
[Code]....
There would be many mainVars (over 100, actually) and this setup isn't working.
I have this code:
ActionScript Code:
for (var j:int = 0; j < 20; j++){
if (values==j){
var "ingredient"+j:"Ingredient"+j = new "Ingredient"+j();
[Code].....
it doesn't work for what are probably obvious reasons but I show it to give you an idea of what I'm trying to do which is change the name of the variables while the program is running.
i am working on a flash website and i have for the first time made everything dynamically loading from outside of the SWF to reduce the file size. I have a text file which is dynamically loaded into a text box, which i have defined in a variable called "textfile". I want to reload the movieclip on the click of a button and at the same time change the variable for the text file to be opened into the text box. so as i click content, the variable changes to content and the movieclip reloads, showing content.txt in the text box
View 1 RepliesI�m planning to make a magazine in Flash, and I would have to load several pages of it in order. But I�d like to put the buttons forward and previous on the main movie and make then load each page in a container.Is there a way to set variables for each page so the main movie "knows" what movie is loaded at the moment and what page it has to load next.
View 5 RepliesI have two buttons (a and b) and a ball movie clip (ballMove) on the screen.This is what I want to happen:The ball starts off under button A. If you click button A, the ball stays where it is. If you click button B, the ball moves over to button B.When the ball is under button B it won't move if B if clicked, but will move to A if A is clicked.How I plan on doing this is within the ball movie there will be three motion tweens, staggered so they don't overlap. The first isn't a tween at all, actually. It is one key frame at the very start of the movie timeline. I have labelled it "beginning". Also, it has a stop action and var busbus = 1. Bus is the variable I want to use to track the position of the ball.
The next tween is the ball travelling from point a to b. The start frame is labelled "atobbegin". There is a keyframe at the end labelled "atobeend". A stop action is on this keyframe, and also bus = 4.The final tween is the ball travelling from point b to point a. The start frame is labelled "btoabegin" and the end keyframe is labelled "btoaend" with a stop action and bus = 8.Eek, just got Deja Vu.er, moving right along....
On button A I have assigned these actions:
on (release) {
if (_root.ballMove.bus == 4) {
[code]......
I have a 13 buttons to wich I added Event listeners using a for loop:
Code:
for (var i:Number = 1; i < 13; i++)
{
[code].....
I have a movie which is made up:
Level0= my interface layout with buttons
Level1= the different sections of the site, are loaded into this level (eg. home.swf, aboutus.swf etc.)
Because each of these sections has both an 'in' and 'out' transition, i want to use variables (on the buttons) to control these external movies that are loaded into the main movie (im even starting to confuse myself
basically in a nutshell... can you use buttons which control a movie ,which has been loaded at another layer, using variables....
I've got a bunch of mc's which I've put in an array. With these mc's you can do a lot of different things, like dragdrop and rotation. I also got a button which on mouse down, changes the image of the mc. It only changes the image.. not the size. So far so good...But when I've clicked the button and the mc's all change their image... They are not able to dragdrop / rotation anymore. I do not understand why this is happening... because by clicking that button... it doesn't change the names of the mc's.....here is the code:
ActionScript Code:
library = new mc_library();
library.x = 100;[code]....
I'm having trouble with a script I'm writing and don't understand why. I have
[Code]....
on a a button that I have, but when i test my file and click on the button, it doesn't change frames.
Is there a way to have a global variable in my main movie, and when certain external swfs load in, it change the value of the variable?
View 2 RepliesI have been using AS2 for a while now but am having some trouble when it comes to the internet side, I basically would like to be able to change the value of a varible on a web page or something and use this value on a different computer, like an mmorpg but it does not have to be that fast, I have looked around and am having trouble working it out, I know you can use servers and stuff but I don't want to have my computer running 24/7 so someone else can use it.
View 1 RepliesMy intention is to have an array with several variables, each one with a different name, all of them of the type 'Number'. This I can do.What I can't do is to access the variables using the array's index.
Paste this on your frame 1:
Code:
trace("======at frame 1======");
//objects//
var objects:Array = new Array();
[code]....
As you can see, the code is changing the value of the array element and not the value of the variable inside the array element.
I am having problems with the
getcoord = xycoordMap[x][y].split(":");
xcoord = getcoord[0].toString();
ycoord = getcoord[1].toString();
xcoord0 = xcoord + "";
ycoord0 = ycoord + "";
code... as you can see in the code I converted three times just to verify that I was working with strings. What happens if you run this script, the variables xcoord0 and ycoord0 magicly change in value when they are used in the IF statement (see the traces). What is going on?? what am I doing worng?? Is there an issue with my 2d Array?
[Code]....
On the bottom layer of the scene, I have the background art and logos.On a second layer, I want to put graphics associated with the button selection of the user.On a third layer I will have the buttons. I want to be able to switch the buttons to another language when a user clicks on a flag at the bottom of the art board, but no matter what language is showing, I want the buttons to call up the related material on the second layer. For instance, I will have one "Install Software" button that will switch to "Software Installieren" when clicking on the German flag and "Installation du logiciel" when French is selected.
View 1 Repliesi cant change url of these buttons .fla file is located here and script used on buttons is
on (rollOver)
{
if (_root.link != num)
{
[Code]....