ActionScript 2.0 :: Variable Array Doesn't Carry Through To The "mySubMenus[i].alphaTo (100,1);" Line?
Oct 1, 2007
why my i variable in the script below doesn't carry through to the "mySubMenus[i].alphaTo (100,1);" line. When I trace, it returns a value of 3, but it's working for myButtons[i]. There must be a way to pass that [i] value someplace else,BTW, this is a variation of one of the mc_tween samples.
var myButtons = [this.servicesBtn, this.portfolioBtn, this.peopleBtn];
var mySubMenus = [this.servicesLevel2, this.portLevel2, this.peopleLevel2];
Loops on all buttons from the first to the last one[code]....
View 4 Replies
Similar Posts:
Nov 23, 2009
Flash CS3, AS 2.0 so I have an XML file containing the number 72, and this script:
Code:
var imageNumber = new XML();
imageNumber.load("imageNumber.xml");
Then later, this script:
[Code]...
The problem is, the variable doesn't carry into my second bit of code. I can add a button and use trace to display the correct variable in the output box, so I know it's getting into Flash. The problem is that it's not applying itself to the second piece of script. Triple checked that the code with by putting in the number manually and using a normal variable, only when I use the XML file as a variable does it refuse to work. I'm very new to Flash so sorry if I've left any important information out, but can anybody shed some light on this?
View 6 Replies
Oct 3, 2011
I'm trying to pass the contents of variable playnoyes to the long line of code below to decide whether or not to autoplay the flash movie, but doing it as I have below, the resultant line of code has the variable in quotes and therefore the code doesn't execute it as expected. My question is, how can I pass the variable so that the resulting line of code doesn't have the quotes around the variable value.
var playnoyes='true';
var testtext = "<script type='text/javascript'>AC_FL_RunContent ('codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.[code]....
View 3 Replies
Dec 16, 2003
I know im a pain asking you all questions about c++ but we all know your all good enough to do anything so thought id give it a shot. I'm creating a naughts and crosses game (tic tac toe for you americans!!) for uni and am getting a little stuck! The game runs and a winner can be decided but when the game ends i want it to ask whether another game wants to be played.
Then i want it to carry on as a new game and loop until the players dont want to play again. i've included the source file in notepad form also could anyone tell me how to carry out a check on the array so that once a value has been entered into that co-ordinate (O or X) another value cannot overwrite it???
View 2 Replies
Jan 8, 2010
i need to split a large text file into an array at line breaks so one array element = one line.i have tried the using "" in both match() and in RegExp but it doesnt work.i had the g and m flags on. tried the $ sign too.
View 8 Replies
Aug 23, 2009
I'm building a dynamic gallery that supports SWFs for individual slides. In order to prevent background sound from carrying over from a previous slide to a different category page, I have attached stopAllSounds(); to navigation menu buttons. It does its job, but it turns off the sounds abruptly. I'm using alphaTo for transition effect from one page to another, and I'm wondering if there is a command that stops playing all sounds in gradation, so that I can make it consistent with page transition.
View 5 Replies
Jan 1, 2012
[Code]...
doesnt clear the line when mc1 moved ? How solve tihs problem?
View 1 Replies
Oct 4, 2006
I have an array called dropTarg1 which stores dropped-in items.I want to loop through this array and in a textfield, display each array item on a new line of this text fieldI think I need to use something like Array.join("/n") but I can't get it working properly. I hope that the /n would create a new line of the text field called reviewBoxContentText.
for(var i:Number = 0; i<dropTarg.length; i++){
with(reviewBoxContent.reviewBoxContentText){
autoSize = true;
[code].....
View 2 Replies
Feb 19, 2009
Why doesn't the text in my TextField go automatically to a new line?
ActionScript Code:
descr = new TextField();
with (descr) {
descr.x=40;
[code]....
View 9 Replies
Apr 13, 2010
Update: Once and for all, how can I draw a line that goes from (0,0) to the opposite corner of the stage?Here is what I have:
package
{
import flash.display.Sprite;
[code].....
View 1 Replies
Nov 13, 2010
I'm trying to add a line to a movie clip. When I trace the width of the lineadded it traces correctly, but the line doesn't appear. If I do everything the same but add the line to the stage instead of the movie clip it does appear. I know this is one of those cases where I can't see the forest fro the trees but
Here's the relevant code:
var xAxis = new Shape(); graph_mc.addChild(xAxis); xAxis.graphics.lineStyle(2, 0x000000, 1) xAxis.graphics.moveTo(startX, startY); xAxis.graphics.lineTo(maxX, startY) xAxis.name =
[code].....
View 3 Replies
Jun 29, 2009
So I have a bit of an odd error.
[Code]...
The line that says xmlData = XML(evt.target.data) freezes my program. Nothing gets past that line. I have no idea what's causing this problem... What I mean by nothing gets past it is that anything anfter that line doesn't get executed. I put the userArea.addChild(userList) before all over the function to determine where the problem was and it's only after that line that my userList was no long showing up.
View 2 Replies
Jul 28, 2011
I have a little snippet of code that allows the user to create a line with the mouse, and clears the line if they end up touching the hitbox with the mouse, while they're drawing the line. It works fine when it's just thrown onto the main timeline. However, when I try to encapsulate it within a movie clip, it suddenly doesn't work. At all. Are there any suggestions as to why this is happening? Here's the code.
[Code]....
View 13 Replies
Aug 16, 2011
I think it would be simplest to explain it like this:
[Code]...
View 1 Replies
Jul 21, 2009
im looking for a way to carry through an affiliate banner tag within a download link with my flash MC. the initial php script is
<a href="http://download.site.com/download.asp?file_name=site.exe&ul=<?php echo $_SESSION['language']; ?>〈=<?php echo $_SESSION['language']; ?>&banner_tag=<?php echo $_SESSION['btag']; ?>"><img src="images/download.gif" width="410" height="89" border="0" alt="Download site" /></a>
I would need to add some variable I guess to the flash?
View 2 Replies
Jun 20, 2011
So I have a simple game I'm making where you are a box shaped character and you have basic movement around the screen. I know how to make walls and the coding but I would like to make a wall that the character can't go through on either of the 4 sides or even a squiggly line that doesn't have a definite shape. I used this coding:
[Code]...
And that does kind of work, but it's not stable (works better with one side only). Sometimes one side of the wall, the character will still be able to go through. The tool I'm using to make the wall is a rectangle tool if that makes any difference. And I'm on actionscipt 2.0 on adobe flash cs4.
View 1 Replies
Mar 28, 2011
I have firefox 3.6.15 with flash debug version 10.3. whenever an error occurs a popups comes up with the error and a stack trace but it does not line numbers of each leaf in the stack trace which makes it more difficult to debug. how to configure it to actually show line numbers ?
I think it may relate to how I compile my flash application. (i think!) i use eclipse FDT 4.2 to compile and i added the following compiler flags: -debug=true -compiler.verbose-stacktraces i think these parameters should be enough but I may be wrong.
View 1 Replies
Oct 12, 2006
I'm going to post the full code of the two functions, disregard the "fluff" unrelated to the two functions as it is all working flawless, I've tested this HEAVILY and cannot understand why it keeps setting the entire array to undefined!
Code:
// processReplace Function
function processReplace(transferFiles) {
var processArray:Array = transferFiles.slice();
[Code]....
Basically it's supposed to check to see if the file exists and return as true if it does and add it to a replace array, then the replace array is processed into a single string and put into a dialog box through the flash wrapper prompting them to "replace the files or not".
It makes the replace array just fine, it actually even has the right "count" in it but it's setting all the "filenames" to undefined because of the exists = processSearch function.
I even tried to make a new array and run the search just from that one and set the values from the old one and it's still failing.
Is it because of the "break" or can anyone figure it out? Iknow it's hard because you can't use the code
View 1 Replies
Sep 3, 2011
I've been trying to carry out hitTest with the two child.They are namely enemy and weapon. However,it seems not working.I had been attempting to sort it out myself and searched the Internet but I got no idea of how to solve it.
stage.addEventListener(Event.ENTER_FRAME, enterFrameHandler);
function enterFrameHandler(event:Event)
{[code]...........
View 10 Replies
Apr 26, 2011
i have a button which should generate two different variables, but it only carries out 1 function and not the other. If i put another button calling the second function it just overwrites the mc generated from the first function.
Also, I need the functions to be on the main timeline as i also need to remove the mcs when needed.
View 1 Replies
Jul 5, 2010
in my script, when a button is clicked it loads a movie clip from the library onto the stage
but what that movie clip does is supposed to be dependant on what button is being pressed. however that movie clip being loaded onto the stage doesn't seem to recognize or load any of the variables from the stage.
its as if, since the movie clip does not exist when the fla is initially run, the movie clip doesnt recognize previously existing variables.. or doesnt recognize any variables outside of itself
View 6 Replies
Aug 25, 2008
I want to change the value of a variable listed in an array using the array. for example:
Code:
var theVariable:Number = 15;
var theArray:Array = [theVariable];
now if I try this
Code:
theArray[0] = 20;
I just get an array with 1 value of 20 in it and it no longer references theVariable what i want to do is change the value of theVariable with out removing it from the array but referencing it from the array in a loop or something.
View 5 Replies
May 15, 2009
I want a black box to fade out the rest of my site when a user clicks on a section in my portfolio, but I want it to go outside of my stage, for when people have larger screen.
If you click on Web/Interactive on the post it you can see what I mean:
[Code]....
View 11 Replies
Aug 10, 2007
I have a movieclip called MC1 and within that 2 frames each containing movieclips called MC2 and MC3. The user can change between the two movieclips and MC3 has a animation within it. Once MC3 is activated, its animation plays but when the user changes to MC2 and then to MC3, the animation is back at the beginning, I want it to keep going even when the user changes to MC2 so when he switches back, the animation is still carrying on.
So basically, I need to know if there is way to have the movieclip playing even if it is not on stage.
View 2 Replies
Mar 8, 2011
He doesn't do much, just an integer what adopts a value between 0-100. I also have a line drawing function. He does lots of things and draws lots of pretty lines. All in just one colour mind.I'd like to be able to change that colour based upon the value of 'n', but I don't know how to convert this integer into the 0x000000-0xFFFFFF format used by linestyle. I can scale and convert 0-100 into a hex string but I'm stumped at how to prepend 0x to the string and how to use this within linestyle...Here's what I have so far....
//rgb = n*16777215/100;
//hex = rgb.toString(16);
//mcImage.lineStyle(1, 0x000000, 100, true, "normal", "none");
[code].....
View 2 Replies
Jan 9, 2009
how do I store and retrieve rather large multi-lined texts blocks that contain hard returns in a url or embed code?
Hah, yeah, probably a ridiculous request but this is used in a flash/custom BBcode partnership. The idea being that the user posts on the bulletin board and wraps their text in [customtag][/customtag]. It spits that information out as an embed code with the text stored as a variable that calls the flash applet and displays their post in a fancy way. This is for a browser based game so it's basically for admin's to post RP style messages.
View 2 Replies
Aug 19, 2009
I've found an example of this [URl] If you click on the mute button at the top, then navigate to another page, the mute button stays clicked. I have a decompiler, and pulled the code out of it. See below:
[Code]...
View 1 Replies
Aug 30, 2009
I've made a button that presents a movie clip (a window) on the screen, you can move this window by grabbing the tab on the top of the window. But when you exit this window and open another (duplicate is made), you cannot move the window at all.My guess is that the code is lost when the duplicate is made, can someone tell me how to transfer my code to all my duplicates? For more info, visit I sent this about a year ago, and still havent got a responce.
View 1 Replies
Nov 20, 2003
ive got a c++ program that im writing, its a simple calculator, the way it runs is by the user entering a number then another number, then the operand..what i need to know is how to carry out a check on the two integers so that only a number can be input, if anything else is then the program returns to the "insert first integer" code.
View 1 Replies
Oct 24, 2002
I'm currently looking into a project which requires a line chart to be generated from an external data source (XML) with a variable number of points.
View 3 Replies
