This is AS2, I am loading text and images with an XML file. Here is my XML:
<data>
<title name="Washington">
<date><![CDATA[<b>Primary Election | </b>August 17th]]></date>
[code]....
I load an image from a url and add it to the stage.
I need a way to add some text to the image before loading it to the stage !
NOTE: add text over the image after it has been loaded
I have tried and had success loading an img into a dynamic textField at run time. But sometimes it takes littile long to load img and gives me an impression that image is not getting loaded.
My textFields html, multiline, autoSize, wordWrap properties are set to TRUE. But still sometimes i dont get my image loaded in to the textField.
Is there anyway i can handle this? Or Is there any way i can trace this issue? My images are also having size of max 7kb.
I am loading images of different size and then images are scaled and border is drawn for each image as shown in below link,[URL]... I want that border of images to be of the same width and height and for that I need to find out the max width and height size image before loading all the images. Is there any way that I can know the width and height of an image before loading it completely?
View 1 RepliesI developing a site where on the homepage, there are about 6 images that rotate, but if you click on a sub link, a different image loads. But the problem is that, the first image has to cycle through before the second image loads. I want the second image to load immediately.
[Code]....
[code]This script is for a loader image gallery in flash, as part of a class assignment. What happens is that in flash, when I open the swf file, the initial image (images/nair_evanescentautumn.png) will load fine. However, clicking on any thumbnail image (including the exact same images/nair_evanescentautumn.png), will result in an error saying the file cannot be found.I cannot figure out why it is doing this... I've tested it over. Clicking each thumbnail does go to the correct position in the two separate functions. All said full-size image links are in the folder images/, and replacing the initial loader image will load the other images in place of the default one. However, clicking on any thumbnail still results in URL not found, even though everything works correctly.[code]Before anyone asks why I'm putting this kind of content into a flash site, I'm not--this is only for a class assignment. I'm just trying to figure out why my images aren't loading right when I'm only doing the exact same thing in the functions as I am on the other pages.Of note, commissions.swf has the exact same feature, just with swf files loaded instead, and it works perfectly fine. home, traditional, digital, and photography all have the image gallery, and all have the same issue (I only referenced one page because if I can fix one page I should be able to fix all of them).As for the artworks, they are all my fiance's. The website design was built for her, and I used the website design for this project because I didn't want to have to build an entirely new interface design. Since the project also required a gallery, I felt that this interface would work just fine.
View 3 RepliesI tried searching for an answer to this on the forums and it seems you can't duplicate a movieclip that has a dynamically loaded jpg in it, I mean you just get a duplicate empty movieclip?What I want to do is have 3 copies of a pic, each tinted a little differently, and have them converge and reveal the "composite" of this pic. Do I then have to use loadMovie 3 times?Does loading the same 50kb image at the same time mean you're actually loading 150kb?
View 5 Repliesi was creating my portfolio using xml gallery script from this site. the thing is that it loads one picture at a the with a preloader between each load. is there a way to load the first image and keep loading the rest so there will be only one loading time? here is my action script:
[Code]....
Is it possible to capture the image loading event like when the image is fully loaded and such when it is assigned to the htmlText of the textFiel???
I have a scrollPane that contains a textField which is loading an image via img tag where there is no scrollbars initially because the textField is not large enough in the beginning, but it is larger than the scrollPane after the image is fully loaded.. and I am trying to update the scrollPane once the image is fully loaded..
I need to create a gallery to load images and display them. This part is fine:
/**
* @variable image_name to store the name of the selected item
*/
private function showimage(evt:Event):void
[Code].....
where imgMain is the id the image component.
But, I need a small twist. A transition image i.e. loading image should be displayed while the the image is being loaded.
I'm loading a .png image with loadMovie() and I need to center the image (for later dragging). I know flash has some issues with loading stuff, but I really need to get the movieclip's width. If someone knows how to get over this and get the movieclip's width
This is a part of a more complex app, so that's why I won't paste any code.
I made 1 image gallery. and i am facing a big issue. When one image is loading in my Loader object. If i click on next image button. It starts loading another image without canceling the existing image. So mutliple images appear at stage in this case. I want something that stops loading older image and start loading new image.
View 4 RepliesI have a database (phpMyAdmin 2.6.0-beta2 ) which holds information which i want to display in a flash form so i'm using an XML file to bridge the gap. After building the application in FLASH and running it the text from the database comes through but no the images. Details of what i'm trying to do are as follows: The XML file
[Code]....
im working on an image viewer and im loading an image to a loader and then add the loader to the stage.I want the user to be able to drag and drop the image but since it's a loader i dont know how to do it.
I tried
imageLoader.startDrag = true;
imageLoader.content.startDrag = true;
but im getting an error on both.
I have a class that loads data from a text file and puts it into an array called tdv.importedTxtArray (public var).In a separate class i have written [code]The infoArray does not then contain the imported text however because tdv.importedTxtArray is not given its popper contents until about 1/2 a second after the tdvLoader class executes (i.e: when Event.COMPLETE is run and the array is populated with strings from the external text file). Subsequently in the code above infoArray is set to a blank array.How can i get the code in my separate class to ''wait' until tdv.importedTxtArray is properly populated before accessing it.
View 2 Repliesin my projects i often use some xml files to load external text that i can format in css and it worked fine till now..i have a site that i am prograaming in italian and german and in both languages there is much text that contains special characters as "à " "ò" "è" "ù" "ä" "ü" and so on .. the problem is that when i write some text with this special characters in xml when the text is loaded in the flash this special characters are not recognised and instead of them a small square is displayed ..
i tryed to load the text from a html file instead of a xml file (because in HTML i know how to write theese special characters and let them display right in my html pages .. for example à = à but no way .. the flash now loades the text à instead of à ..
I need help dynamically loading text from a server into a dynamic text box in my movie. If i use the loadVariables it works, with the Html rendering.. if i use it with loadVars it works but now the html doesn't render. What i want is to load some text from my server into the text box and have the html to render. Also, is there a way to display the progress as the text loads, for people with slower connections?
View 1 Repliesloading some text on dinamic textfields on several Mcs that are rotated on the screen, but the texts just appear when the Mcs are rotated.
View 3 RepliesSo I'm loading text from an external file I've uploaded onto the internet. It loads absolutely fine when I test the movie from my computer, but when I upload it and embed it onto an html page, all of the dynamic text refuses to load. Can someone enlighten me as to what's going on? Or at least tell me how to fix it? XD;
[Code]...
I need help dynamically loading text from a server into a dynamic text box in my movie. If i use the loadVariables it works, with the Html rendering.. if i use it with loadVars it works but now the html doesn't render. What i want is to load some text from my server into the text box and have the html to render. Also, is there a way to display the progress as the text loads, for people with slower connections?
View 1 RepliesI embed image in html text field like [code]...
The problem is that text is being wrapped around an image. How can I get the text to be displayed under the inserted image?
I 'm trying to make it so an image will scroll with a specific line of text in a text field. I know that using delta of the scrollEvent will give me direction but everytime i try to increment and decrement the y value of the image the image doesn't follow the line of text perfectly it tends to "crawl" if you will.
[Code]....
I am trying to make a web page similar to the link below...where when a customer types in the form text field, and simultaneously, the text will preview in another area of the webpage over and image. See example when you create a label[URL]
View 1 Repliesthis is should be pretty simple but I have had a lot of trouble figuring this out..
I have one dynamic text field called "content_txt"
I have 3 buttons with 3 different instance names (btn1 btn2 btn3)
I have 3 text documents in a folder (1.txt 2.txt 3.txt)
I am able to have 1.txt loaded into content_txt, but here is the problem.
I would like btn2 to load 2.txt and btn3 to load 3.txt into content_txt.
I have looked for an answer for this problem (and found many close answers) but when I try and make my code fit, it just doesn't work. I'm really new to this so any help would be amazing. (or if this has been answered somewhere else and I have missed it..
Go into the 3D Studio Max link and in there you'll see my problem.....How can I get the text to format to the width of the dynamic text field? What I have are variables set up to load text from an uploaded .txt file, into the dynamic text field... it seems to run each line way over to the right...
View 3 RepliesI have an xml file loading text into a dynamic text field. What would the AS be to fade it in?
View 3 RepliesI have a scrollbar that uses a movieclip-instance name "text" to display dynamic text.On the main timeline I used the following code:
myLoadVars = new LoadVars();
myLoadVars.onLoad = function() {
dynamictextcontent.htmlText = myLoadVars.dynamictextvariable_html;
[code].....
When a user enters the website, it will pull text from some location (possibly an XML file) and load it into a text field. The trick is that I want it to randomly load a different chunk of text in each time the user opens the site. There are about 25 different small pieces of text I want to randomly load.
View 5 RepliesI need text to be displayed with some movie clips or smileys with it in dynamic text box. Like the below but when i tried to do this i am getting some thing like this it is registering with left or right only. how to rectify it? I am using html output for attaching the clip with text for output
View 4 RepliesI'm doing some experiments on images from xml document when clicked it will send a string text into a dynamic text in the stage. My image is now clickable but has a wrong argument in its function this is my code
Code:
import flash.display.*;
import flash.events.*;
import flash.net.URLRequest;
[Code]....