Fla is attached (small file, simple function)I am going thrue an array and create instances of 'inputter'.It all works fine for the last one in the array but not the first ones.Shortening the array-count still creates only the last one and not the first ones.
My function:
ActionScript Code:
doinit = function()
[code].....
I am loading images dynamically in a class that creates a custome menu item that is loaded into a custom menu. It works fine except the very first image never loads
[Code]....
I create an array of two-item arrays. However, I seem to get three nested arrays back as the code below is what is required to get to the array. I can not figure out why the middle array exists.
Create arrays with:
[Code].....
Is there a way to extend the movieclip class without using a library item and attachMovie?
View 3 RepliesI have an array that creates 7 mc clips with names.I'm trying to make each one of those peices clickable.When clicked each peice will slide over to the far left "barrier_mc" and stop.Actually not true, the one closest to the "barrier_mc" will stop at the barrier and from then on each piece will stop when it hits the one beside it (kinda like a 7 car fender-bender). This isnt the problem im trying to work through right now, although i will in the near future.
What im trying to figure out is the array that creates the mc's names them like the following "" infoBar"+i+"_mc"". What im trying to do is call that in a function so that i dont have to type in each of the 7 mc names manual I.E (infoBar0_mc) you'll see my function at the bottem in the "function pieceStop"of the pasted code.
Code:
var list:Array = ["piece1", "piece2", "piece3", "piece4", "piece5", "piece6", "piece7"];
var startingX:Number = list_mc._x;
var bottom:Number = 950;[code].....
I have to create a function that creates an array of arrays. I have to be able to add elements to the array, delete elements and extract elements? the elements will be arrays. How to I do that, or it is possible?
View 8 RepliesI keep confusing myself :S I've been staring at this screen too long.I'm trying to build function that creates a 2D array similar to this one:
Code:
private var test:Array = new Array
(
[code].....
Is it possible to pass the contents of an array to JavaScript code which then creates a text file on the local machine?
View 10 Repliesi need to combine these two scripte (first one creates array to play movie clips in a order fro left to right of the screen depending on position ) each script works corectly if used on there own. but i want to combine them
var videos:Array = new Array("mc1", "mc2", "mc3", "mc4");
var busy:Boolean = false;
for(var i = 0; i<videos.length; i++)[code]....
I put my mc's in an array.I have another array with strings.when the mc is clicked I want to get its position in the mc array and return the string from the same position in the string array.How do I do that?
PHP Code:
var numBtnArray:Array = new Array;
function addNumButtonsToStage():void{
[code].....
I know how to remove duplicates from an array, but what I'm trying to do is prevent an item from ever being added to an array in the first place if it already exists. I'm pulling in data from an xml feed in a loop, and I thought that searching for that values index would work, but no matter what, the index is always -1. Here's my code:
[Code]...
Maybe I'm misunderstanding the indexOf function, but I thought it was supposed to return -1 if a value did not exist in an array. What am I doing wrong?
Code:
var numOfChars = 0;
setCharacters = new Array();
if (empty1.hitTest(_xmouse,_ymouse,false))
[Code]....
I'm creating some mc's on the stage with the attachMovie function in a loop. I have no problem naming them like that:
foo.attachMovie("myClip", "myClip"+i, 200+i);
But I need to name them with part of an array like that:
foo.attachMovie("myClip", "myClip"+array[i]+"_mc", 200+i);
I thought that would work but I guess my synthax is wrong. How do you mix strings and arrays elements inside the () of the attachMovie?I need to get something like: myClipArrayElement1_mc for the name of the attached movies...
I'm trying to reduce repetition in my code by using a for loop with an attachMovie call. [code]So I have a bunch of clips in array that I want to attach, and I just want to use the name of the clip as the instance name, but it doesnt seem to work.
View 3 Repliesok, that's some basic question but it's 4 am, I can't find the answer in the tutz and I'm starting to get a headache...I'm creating some mc's on the stage with the attachMovie function in a loop. I have no problem naming them like that:foo.attachMovie("myClip", "myClip"+i, 200+i);But I need to name them with part of an array like that:foo.attachMovie("myClip", "myClip"+array[i]+"_mc", 200+i);I thought that would work but I guess my synthax is wrong... How do you mix strings and arrays elements inside the () of the attachMovie?
View 6 RepliesI have this code to try to acess the values of the array in the arraycollection but it does not work it actually creates a value to the end of the arraycollection. can anyone tell me what im doing wrong i basically whant to modifys the individual arrays in the arraycollection and add Login_user.
Code:
for(var i:int = 0; i< dispArray.length; ++i){
dispArray.addItemAt({"login_user":"XXX"},i);
}
is there anyway to put all movies that are attached with attachMovie in an array?
ex.
attachMovie ('ball','ball1',this.getNextHighestDepth())
then it will allso run a code that push the array with 'ball1' ? ?
I am trying to attachMovie from array.
Here it goes like this:
var __reg3 = new Array ("1", "2", "3", "4");
_root.p1.attachMovie(__reg3[0] + 1, "run1", 1); -- Not working
Then I tried using string:
[Code]...
I am trying to attachMovie from array.
Here it goes like this:
----------------------
var __reg3 = new Array ("1", "2", "3", "4");
_root.p1.attachMovie(__reg3[0] + 1, "run1", 1); -- Not working
Then I tried using string:
test1:String = __reg3[0] + 1
_root.p1.attachMovie('"+'test1+'"', "run1", 1); -- Not working
Then I tried this
_root.p1.attachMovie(" "" +test1+" "", "run1", 1); -- Not working
Then used this:
qt:String = '"';
_root.p1.attachMovie(qt+test1+qt, "run1", 1); -- Not working
But when I use like this, its working:
_root.p1.attachMovie("3", "run1", 1); -- working.
I'm developing a game and the objective is to drag some objects to a container. Some objects add points, and some other subtract points. So, all the objects are in the library and have a linkage name to be called by attachMovie. I want to create an Array with all the objects that belong to container, like for example filename1 = ["obj1", "obj2", "obj3"]; etc... I have a var called count1 that defines the number of objects to appear on the Scene
[Code]....
I want to know if there is a method or some code to add new items to an array, but it want the items have the name of the buttons's instance name, or the label's name, so when i push the button, it adds its name to an array. Here is my code:
ActionScript Code:
tauri.addEventListener(MouseEvent.CLICK, addAddress);
abydos.addEventListener(MouseEvent.CLICK, addAddress);
tollana.addEventListener(MouseEvent.CLICK, addAddress);
dialNow.addEventListener(MouseEvent.CLICK, dialTo);
var tauriAddress:Array = ["tauri","abydos"];
var newAddress:Array = new Array();
function addAddress(event:MouseEvent):void {
newAddress.push();
I don't know if I should use the push method here, tell me what to put here for adding the instance name of the button to the array
trace(newAddress);
}
below is my script,to sum up the number in my array....but the output is all the numbers in array and not the sum up numbers....
CorrectMark =correctArray[0]+correctArray[1]+correctArray[2]+ correctArray[3]+ correctArray[4];
display.text=CorrectMark;
I'm trying to add an item to an array, but when I do, it keeps the results (prizeField) from before and adds the new ones to it. i.e. at the beginning if I push a string to the array I have 4 items. If I push another, I then have 9. Then 15 and so forth. Here is my code:
Code:
var myFlexParent:Object;
var prizeArray:Array = ["apples", "bananas", "cranberries"];
var textFormat:TextFormat = new TextFormat("Cairo", 48);[code].....
I know that I need some sort of removeChild() in there, but I cannot get it to actually work.
When the combo box is changed it will add items to another combo box, i.e if africa is chosen, all the countries in africa will be listed in the second combo box.
At the moment i am manually adding in all the countries, _root.combo1.addItem("Label", "Data");
for 60 countries that would be messy code, is there a way to do it in an array cause my advanced actionsript isnt that good. But i will need to be able to get the data of a country out later ....
Hw to add an item to the front of an array? this works fine, but not sure if its the most "poetic" code around.[code]...
View 2 RepliesI have one array with items. now I want to remove all items from array. How it can be possible ?
View 7 RepliesI have a tricky problem in that I have an array that has been populated with strings ("item1", "item2", etc). However, at a certain point I need to pull one randomly out of the group, via a random number function. The issue is I cannot reference the items in the array by a number, I get an error. So when I try to get myArray(5) it doesn't work.
How can I work around this so I can grab a random item in my string array?
var arr1:Array = new Array();
arr1.push(item1);
arr1.push(item2);
arr1.push(item3);
then arr1 and its elements get passed to other functions is there a way to know the index of an item in the array?
GetParentArrayIndex(item2) would give me 1;
I have 2 arrays & 2 checkbox repeaters: the second gets populated w/ items selected from the first. I can add the items no problem. How do I then delete the item if it gets deselected from the first checkbox repeater?
[Code]....
I have two two-dimensional arrays, and this line of code:
openListParents[compWith] = openList[olID];
Does it work? Yes. However, openListParents[compWith] becomes openList[olID], but I want openListParents[compWith] to be the value of openList[olID]. This is what I get when I press CTRL+ALT+V:
[Code].....
This is because openList might change, and I want the value of that openListParents in the array to be the value of the openList at the time when the code is run.