ActionScript 2.0 :: Attempting To Advance A Movie By Time Not By Frame Rate?
Sep 3, 2004
I'm attempting to advance a movie by time not by frame rate so, on frame 34 I have
Code:
function playNext() {
gotoAndPlay("scene1");
clearInterval(timerInterval);
}
timerInterval = setInterval(playNext, 5000);
with a scene1 label at frame 45, but the movie does not stop at 34, it continues to frame 45 plays to 55, where their is a
Code:
stop()
action. At frame 55 it loops back to 45, playing once again to 55 then stops.
What Am I missing?
View 3 Replies
Similar Posts:
Sep 21, 2004
it possible to set the frame rate of an externally loaded movie to a different frame rate than the movie it is embedded within. I basically have a flash site that loads flash movies using loadMovie command, however, the frame is lost within these movies and simply adopts the main site frame rate.
View 2 Replies
Sep 21, 2004
set the frame rate of an externally loaded movie to a different frame rate than the movie it is embedded within.
I basically have a flash site that loads flash movies using loadMovie command, however, the frame is lost within these movies and simply adopts the main site frame rate.
View 2 Replies
Nov 24, 2009
I've created a complicated animation at a stupidly high frame rate. The .mov file at the moment just runs too slowly. The animation is of a watch interface so the timing is very important and I can't just have the movie file take twice as long at a lower frame rate.
How can I drop the frame rate without altering the overall time? and without manually changing the frame length of each motion tween?
View 1 Replies
Apr 25, 2010
I'm recording Webcam to FMS 3.5 but when I play the recorded video from FMS it's choppy. I have set the camera.fps to 30 but when I trace out the currentFPS for camera it's variable and usually falls between 20 and 30. However when I play the recorded video, netStream's currentFPS returns a lower value, something closer to 10. So my question is, 1) why currentFPS of netStream is not the same as Camera's? 2) What's the actual frame rate of the recorded video (not the netStream, but FLV's)?
View 2 Replies
Feb 11, 2010
How does frame rate influence load and/or render time?
View 2 Replies
Oct 16, 2003
Is it at all possible to change the frame rate of a movie with AS?
View 3 Replies
Dec 10, 2011
I'm trying to find a way to make a certain movie clip run at a faster frame rate than the main timeline. I've searched around a lot and only found ways to make it go at a slower frame rate (using the FPS Controller Component).
View 4 Replies
Mar 4, 2011
I understand that in order to make it consume less CPU cycles flash player forces the player to only execute at 2fps (or some other ridiculously low amount) when the swf is no longer in focus (or even if it's still "in focus" but not being rendered to the screen by virtue of being in a section of the browser window that's scrolled offscreen.) Is there any possible way to change this? I have a 3D engine that needs to keep the FR up.
View 7 Replies
Jan 22, 2011
I am building a small flash application. In my application I've inserted an fla video. the flv video's length when I open it in vlc player is 16 seconds (after I edit the speed of the video in an external program and then converted it back to fla). When I open it in flash cs 5, the video's length is back to 90 seconds. I guess it's got something to do with the frame rate of my flash project. I'd like to be able to change the frame rate of only the movie clip containing that video, and not of the entire stage. How is that possible?
View 1 Replies
Apr 8, 2003
How to adjust the frame rate of an imported movie so that it would run in its intended fps rate, and not at the same rate as the presentation in which is importing it. (To be more specific, my main presentation runs at 1 fps, but the intro movie I want to add runs at 20 fps). Anyway, along my travels, someone pointed me towards the code at [URL]. I have since downloaded it and tried to get it to work. As it turns out, I know so little about flash and actionscript programming that I am unable to get it to work properly!
According to the comments in the code, it is executed by calling the fPlayControl() function, which has the following syntax:
_levelN.fPlayControl(_root.mcMovie,nFPS)
where (quoting now)
"'N' is the level number of where this swf is loaded and 'mcMovie' is a movie clip on the _root timeline of the movie that is calling this function and 'nFPS' is a number between 1 and 120."
I don't even know what levels are! Are they layers? Thus, the first layer is level 0? Then the next layer is level 1? Next, how do I give an imported movie a name so that I can call this function with the movie's name as parameter? I tried importing a movie into the library, and then giving it a name, but I still couldn't get the bloody thing to work.
My steps to attempt to get this to work: I opened the play_control.fla file, and chose "Import to library..." I then selected my little intro movie, and then I brought up the library, and renamed it. I also choose the "Export for ActionScript" option, which automatically highlighted one or two other options. Then I added this one line after all the other ActionScript code:
_level0.fPlayControl(_root.myintro,1);
Anyway, after doing that, nothing came up. Then I added another layer and inserted the intro movie from the library into it and played the movie again. This time the intro played, but it zoomed along (at I'm assuming 120 fps, which is what the speed is set to in the demonstration file I downloaded). Thus, it still wasn't working.
View 4 Replies
Sep 5, 2009
I'm trying to increase the speed of a single movieclip. The frame rate of my movie is 12, and I don't want to increase the frame rate of the entire movie just to speed up one movieclip.I've seen tutorials all over the web, and all the actionscript controlled speeds of movieclip tutorials are for more interactive animations, such as mouse movements and rollovers.I'm looking for something that simply plays a movieclip faster on the timeline and I'm sure there is a simple code for this.
View 2 Replies
May 7, 2011
I want to know that how can I control frame rate of my flash movie from xml file or from AS2 code.
View 2 Replies
Dec 29, 2011
I'm new to AS3 and desperately trying to figure out how to smoothly accelerate the frame rate of a movie clip (let's say from 0 to 24 over the course of a second or two) as a result of rolling over a button. I've been working on it for about a week just to get this far, and now I've hit a wall. Here's my code thus far:
stop();
var cf:int;
var fr:int = 1;[code]....
Basically, right now it starts at a very slow frame rate and stays there, never getting up to 24 fps. The only two objects in the scene are button1 and box1. The desired functionality is that when you hover over button1, the box1 movie clip starts playing slowly then accelerates up to 24 fps and continues playing at that rate until you roll out of button1.
View 4 Replies
Feb 12, 2009
I was wondering if it is possible to change the frame rate per seceond (fps) of a movie clip while the movie is playing.
View 2 Replies
Feb 28, 2007
Does anyone know how to trace out the frame rate that a swf is currently playing at?I've tried creating two date objects on adjacent frames, running the getTime() method on each and subtracting the difference but it seems to be the same regardless of what I set the movie's frame rate to in the property inspector...I am basically trying to monitor the performance of an animation at runtime and make adjustments on the fly based on how fast or slow the movie is playing.
View 4 Replies
Jun 9, 2004
I am trying to get a .asp example file from an actionscripting book to work, but it keeps telling me that there is an error trying to open the .asp page on my server.I uploaded the .asp file, and the access file onto my server, but it is not communicating.Are there any browswer settings or web-hosting settings I should be aware of before I try to send and receive information from a database?Also, I eliminated one variable. In another document, I was able to pull information from a text file from my web server without any problems.
View 3 Replies
Oct 26, 2010
i've recently installed Wowza media server 2 locally, currently only for testing purposes.everything works fine, except of accurate seeking functionality - or in other words advancing frame-by-frame .when i use VLC to play my video file i have no problems advancing frame-by-frame. however, when i use the 'seek()' function to move the playhead a fraction of a second, its seems to move only to the next key frame (meaning that only once every few mouse clicks the playhead advances dramatically).
View 1 Replies
Dec 14, 2011
I have a series of MCs in my root timeline. On each frame in the root, I am simply running 'stop();' to allow the MC within the frame to play through all the way. Once the timeline within the MC reaches the last frame, I have the following AS to go back to the root and play the next frame (each frame is labelled):
[Code]....
View 1 Replies
Oct 24, 2011
I have about 2 minutes of real life footage.
I need to put this in a "flash container" and make it advance frame by frame every time the UP key is pressed.
The faster the UP key is pressed, the faster the film should advance.
Accelleration and decelleration should seem "natural" (not bumpy and sudden).
View 4 Replies
Mar 26, 2012
I'm using this action for specific keys to simply advance the time line -
on(keyPress "<Space>"){
play();
}
what if I want to use all the keys of the keyboard to control this action ? Is the group selector to use ? Like "all keyboard" "all keys"?
I have got AS3 code to do it -
stage.addEventListener(KeyboardEvent.KEY_DOWN, fl_KeyboardDownHandler);
function fl_KeyboardDownHandler(event:KeyboardEvent):void {
gotoAndPlay(currentFrame+1);
}
But wanted it for AS2 ?
View 3 Replies
Sep 9, 2009
URL...Basically, you press button to enter and the tape measure will roll in time with the amount of data/frames loaded. So if 50% of data/frames loaded, the animation would be halfway completed. Upon completion, it zooms in on tape measure and I have animations from there to get to the main site.This was successfully done in Actionscript 2.0, but I need it to work in Actionscript 3.0.
View 3 Replies
Mar 26, 2004
i have a movie clip with a dynamic text field being animated...i have a text file with this in it
&textline1=time
&textline2=place
&textline3=year
&textline4=month
now how do i make the movie clip to first go from frame 1 to 10( last frame in teh movieclip) with the text time and then when the movie clip starts again it should say place and so on and so forth.. depending on how many textline variables i define in the text file?
View 5 Replies
Nov 11, 2009
I need to create a simple presentation that displays a bunch of photos.I want to be able to hit the space bar to advance to next picture.I am able to stop the playhead at the picture, but i want to advance to next labelled frame by hitting the space bar.
View 2 Replies
Sep 23, 2011
I have some buttons on the frame. I also have an event listener that is waiting for the user to press the Tab key to advance to the next frame. Is there any way, using ActionScript 3, to have the Flash player not recognize the buttons, because when I'm testing it, using the Tab key, it goes through the progression moving from one button to another, and then finally it advances to the next frame where I want it to go directly to the next frame and bypass the buttons. The simplest way is not to have the buttons, but I need them.
View 3 Replies
Mar 27, 2012
I got a MovieClip filled with a lot of others clips... When I change de X or Y value of this first MovieClip the frame rate slows down for during 1 frame. For exemple... I created a counter that returns around 30 mseconds every frame, but when I do this X or Y change the return is around 400 mseconds... When I try to fill the first MovieClip with less information it goes faster, about 100+-200 mseconds...
View 6 Replies
Apr 24, 2009
I have a button on frame 1 that, when pressed advances to frame 2. On frame 2, there is an animated symbol that starts playing right as you get to the frame. I want this to play once, and then advane to frame 3, but I can't seem to figure out how to do it? Please help, all it does now is loop continuously on frame 2, and I can't figure out how to advance to frame 3.
View 3 Replies
Feb 6, 2009
I have a small flv embedded in the timeline of my movie clip (instance name = bg)
now what I want to happen is when I hit my button (instance name = b1)I want the bg movie clip to goto and play the from the next frame on the timeline.[code]...
View 2 Replies
Sep 4, 2009
I am needing to create a preloader that advances a 10 frame animation every 10% loaded. So there will be a percentage indicator (dynamic text) and a short animation as the load bar (10 frames). The animation is of tape winding into a tape measure, and when it's fully inside the loading is complete and timeline moves onto next frame. I have been able to do this with AS2, using a combination of (stop) and (play) commands whenever the next 10% was loaded.
[Code]...
View 1 Replies
Aug 10, 2009
I am attempting to get a movie clip from the Library to play from another movie clip. I knew how to do this in AS2, but I'm trying to learn AS3 and I am at a loss to understand how to do this.In AS2 I would just have to code:
Code:
_root.movieClipName.play();
but in AS3 when I enter in this code:
[code].....
View 1 Replies
