what i'm trying to accomplish is onthe rollover of a button, a picturefades in, and on rollout, the picturefades out. that shouldn't be too hard,but i would like to have one rolled out and another rolled over, so one pictureis fading out, and another fading inthese pictures are supposed to overlayso i am thinking that i will need to useactionscripts to control the timeline ofa movieclip.
View 1 RepliesI have a button inside a movieclip, to which I would like to apply a rollover function. When rolled over, this button (inside MOVIECLIP 1) would make (MOVIECLIP 2) jump to second frame. I'm using Flash 8.This is turning onto a real headache for me, since i've searched every single forum and thread concerning this matter, and nothing seems to work.
View 7 RepliesI do have a movie clip and inside that movie clip I have used a button in order to control the time line of the MC. I have divided the MC time line in to 4 parts. and according to the roll ove and role out the movie clip works. I want to change the scene when user click the MC clip. How can i do that? I have attached the FLA file to this one.
View 1 RepliesHow can I access the main timeline from inside a MovieClip. In short words I would like to be able to move the main timeline from a MovieClip, for instance if I have a MovieClip called myMc and I want the main timeline to gotoAndStop in frame (3) when myMc is done paying.
View 2 RepliesI have 2 buttons (prev and next) that should control the timeline of a moviclip called "container"
but it just doesn't work. at first it moves to the second frame on this movieclip then the container shows always the same content ( it has different content for each frame), the content of the second frame.[code]...
I have a movieclip inside the OVER on a button, right now I have an animation that causes the button's brightness increases from 0 to 10 over 24 frames and then come stops because of a stop (). I now intend to add an animation after stop () which gets the button's brightness goes back to 0 again when you no longer hold the mouse over the button. I would therefore like to make some kind of mouseOut event that allows Movieclip go to the next frame. I have tried to insert a target path but it seems that it can't reach the movie clip inside the button.
View 1 RepliesI have a stop on my main timeline. At the stop I have a movieclip play. In the movieclip I will have a video play. After the video plays I have a button for the user to continue play until the end of the movieclip. Once the movieclip is done I want to resume back to a specific frame in my main timeline.
View 3 RepliesFirst off, I have a movie clip called mc_instructions. Inside the movie clip, about 940 frames into it, a button appears called btn_ready. I need this button to bring me to frame 3 on the main timeline when clicked on.
View 1 RepliesI am trying to do a simple thing in theory. In my main timeline I have a series of images with frame labels for each. In a movieclip (with its own labels) below the images, I have two panels of butttons that flop back and forth (to save space). The idea is to simply have the maintime play the frame specified by the corresponding button in the movieclip. [code]...
View 1 RepliesI created a Movie Clip with a button inside it. The Movie Clip contains simple animation within its timeline. I dragged the Movie Clip to the main stage and tested the movie/ My goal is to have the button start the animation inside the Movie Clips timeline but it is not working.The Movie Clip instance is named 'film_mc' and the button inside it is named 'first_btn.' The frame is labeled 'one'. I tried these two Action Scripts that I put on the main timeline. Where am I going wrong?
film_mc.first_btn.onRelease=function(){
film_mc.gotoAndPlay("one");
}
[code].....
I'm currently attempting at a little flash project where i have a movieclip travelling vertically downwards along the Y axis. When it hits a certain axis (in this instance, 500), I have a class written so that the movieclip then travels back upwards along the Y axis. I want the movieclip to change frame when it hits 500 along the Y axis (it's a movieclip of a bird flying towards the sea, and as it flies back up i want a fish in it's claws). I've tried looking into a method to do this, but nothing seems to work! I tried adding to following line of code into my class -
{
if(_y > 500){
enemy1.gotoAndStop (2);
}
but it gives me an error stating my movieclip is not a static attribute, and i have no idea what that means. I've tried putting a variation of this code into frame 1 of the movieclip itself, but it just skips straight to frame 2 without taking notice of any code relating to the Y axis.
I have a basic xml driven portfolio. The xml file holds the path to the portfolio pieces (external .swfs). I have a main navigation that moves from project to project and a subnavigation to view individual pages of that project.The subnav is where I have the problem, I simply want to call gotoAndPlay("framelabel") of the designated mc. It seems that you can no longer call to the timeline of child movieclips as you could with AS 2. I've found some examples Except the examples discuss access of nested movieclips on the stage with assigned instance names. But the problem I'm facing is that I have each item pulled in via the loader Class then the objects are pushed into an array and my subnav needs to access them dynamically via array notation.something like this:
PHP Code:
public function loadMe(){
//var l:Loader = new Loader();
[code].....
elow sir I am new here in actionscript and i'm using actionScript 3.0 I need to know what correct code to navigate this. First I have a movieClip from stage in main timeline and i use it as an container for my sprite an instance name of "container_mc" and when that sprite plays after it, it will stop and it will appear a button, I need that button to remove this sprite from the main timeline.
View 1 RepliesI've created a movieclip with buttons inside that I want to use to navigate to different scenes on the main timeline. I have created a function() that loads the button movieclip into the main timeline, but if I try to write a function() to activate the button and move the main timeline to a different scene/frame label it doesn't work. I have tried various things:
navBack_mc.book_btn.onRelease = function() {
_root.gotoAndStop("book1");
}
I put the code above on the main timeline. It doesn't seem to work. Basically, I could put just an on(release) handler on the buttons, but I wanted to try to keeping all the AS in one place if I can.
I've created a movieclip with buttons inside that I want to use to navigate to different scenes on the main timeline. I have created a function() that loads the button movieclip into the main timeline, but if I try to write a function() to activate the button and move the main timeline to a different scene/frame label it doesn't work. I have tried various things:
navBack_mc.book_btn.onRelease = function() {
_root.gotoAndStop("book1");
}
[code]......
i'd like to control MovieClip timeline witch contain several DisplayObject (like Sprite, Button, ...) these DisplayObject have Motion (AnimatorFactory). How can i do seek frame-by-frame the MovieClip Timeline and use the currentFrame to control all Motion child.
[Code]....
On my main timeline, I load a mc from the library with:
text_content.attachMovie("text_content", "text_content", 10);
There is a marker inside this mc called "news". I need a script in the main timeline that will gotoandStop "news" within the "text_content" mc.I have tried, amongst others
[code].....
I simply want to assign a variable to the current frame of the main timeline (not movieclip timeline) I already know about _currentframe and it doesn't help in this case.
View 4 RepliesI am in the learning process. Working with FlashCS5 and AS3. if the issue appears to be too simple for you. Placed a movieclip(mcassessJohn) on the main timeline and moved to the frame labelled "johnFeedback" in the movieclip timeline using the following actionscript code.
[Code]...
Where can I find ready-made buttons that will control an FLV and a timeline together? I have a swf with an FLV and I animate images and phrases on a movieClip timeline timed to what they say in the flv. I set up cuepoints that trigger the animations, so when users scrub, pause, etc. the timeline eventually catches up with the FLV, but it would be a lot nicer if the pause, scrub, etc. would do the same to the timeline and there was no lag time.
View 1 RepliesWhy does a child movieclip only show the first frame within the IDE, regardless of where you are in the parent timeline?If you throw a movieclip with 25 frames onto the main timeline, which also has 25 frame, you don't see the nested movieclip's frame-progress while you scroll through the main timeline.Is there a setting somewhere in preferences or somewhere that will enable you to see a nested movieclip's frame position from the main timeline? Like you do with After Effects composites?
View 3 Repliesin AS2 how would i use the down arrow key to make the timeline play? at the moment i have this and i presume i need to put something after that to make it play. [code]but i presume this is totaly wrong because the "stop();" doesnt stop the clip when the "if (Key.isDown(40))" bit is after it.
View 2 RepliesI have an application with a collection of sounds in the timeline. One sound file is recorded at a slightly lower volume than the others. I know I could change this in Audacity but I'm wondering whether I could attach a line of actionscript to its button to raise its volume slightly.I know its possible to do this when playing sounds with actionscript directly from the library, but that would be too big a departure from the development style used.
View 1 RepliesI am creating a very simple presentation in CS3, which will be projected on-screen and will have a live speaker. I would like to be able to pause the SWF at various locations along the timeline so that the speaker my discuss issues on the screen, and then presume playing it. Since don't want this control visible (such as with a button) to the audience, I would like the control either with the press of a key, such as the arrow right key, or with a remote controller. How would I encode this both with the press of a key or with a remote controller?
View 10 Repliesi know i've done this before! i have a swf. 4 labels. a stopat frame 1. i embedd this into my main timeline. i have 4 butons inan MC in my main project, going to specific labels in my maintimeline, where i have the following code, attempting to load theswf and jump to that label:
this.container_shell.loadMovie("interact01.swf");
interact_shellb.gotoAndStop("label1");
its not working. the swf loads, but i can't jump to thelabel
in the old version of flash, there was an option in the property inspector where one could have assigned ie. 8 seconds to a keyframe (esp. text) so one could read the let's say 3 sentences before the next set of sentences came on the stage. i swear there was an option for this in flash 8. can anyone tell me how to control the timing in flashcs4 in between frames? i know how to make the very last frame stop( ); in actionscript 3.
View 2 RepliesI have sound on the timeline.
Also I have the following buttontns[code]...
What was simple is now documented by 15 pages of chicken scratchesI have searched through the docs and am just lostWhat I want to do was simple enough in AS2: onClipEvent (EnterFrame)_root.gotoAndPlay("2");But can't be done now. It doesn't work as a frame action either without the onClipEvent. All I want to do is go from the last frame of the timeline to frame 2 and skip the preloader. How the heck do I do that in AS3? I've searched online and cannot find the method, and perhaps search terms don't work. Anything I can find applies to AS2.
View 12 RepliesI am trying to use a button to control a timelineie if you click once you gotoAndPlay frame 2, the next time you click the same button you will gotoAndPlay frame 22, then gotoAndPlay 44 etc.I have spent the last couple of days trawling forums and a variable seems to be the answer, but I am not sure if this is correct.
View 6 RepliesI have two swf files. I use as3 on the main timeline of a.swf which successfully loads and inserts b.swf onto the stage (b.swf has a stop on fame 1):
[Code]...
My goal it to get the myButton click to play frame 2 of the recently loaded b.swf - but that's not happening.What am I doing wrong?