I have a dynamic text box and i want to mask it but its not working. i remember once someone was showing me something that had to be done to a dynamic text box to get _alpha effects on them and I wonder if its the same thing. Problem is, I don't know what that "thing" is.
View 4 RepliesI have created a movieClip and placed two dynamically created text fields within it. These fields use embedded fonts and work when I first add text and the format to themThe issue I'm having happens when I change the _alpha of the containing movieClip to 0. After that I can not get the text to appear again, even though the _alpha on the containing clip traces out to 100.I am not using the tween class on the textFields or containing clip to achieve the _alpha. I am however using the tween class elsewhere.
View 9 RepliesI have a slideshow that loads images fia xml.
I have a caption in the middle of stage, that fade in with image.
my problem is that it blinks all the time. I don't know what should I do this is my code that fade image:
ActionScript:
this["image_dropzone" + _root.currentImage]._alpha = 100 * (_root.counter / (_root.fade * _root.second));
[Code]....
I have this Slideshow. http://www.flashkit.com/movies/Scrip...8470/index.php
How to make _root.caption Fade in and fade out with Image. Without Blink.
i am facing a problem with dynamic text and mask,when i use a dynamic text and i am trying to mask the text area it's not showing in swf
View 7 Repliesi have a dynamic text block which is inside a movie clip, is i grouped with other elements.This movie clip sits behind a mask. when i am in the movie clip i can see the text field, when i am on the root level (and the mask is disabled) i can see the text, but when i preview the movie the text IS GONE or I CAN'T SEE IT.
View 1 RepliesHello Flash World, Ok, I may have posted this question before but I am still confused. I have a Master Movie Clip that has a Mask over it. By having that mask I can't view my dynamic text box that is scrollable. How do I embed a font so I can view my dynamic text box? (Im using AS2) attach is a file that explains my problem.
View 1 RepliesI'm trying to set a mask on a mc containing dynamic text. But, the only thing that are visible, are graphics, not text.
When i remove the mask, the text comes back.
i heard that i have to embed my fonts for that, but how can i do it?
i have a dynamic text block which is inside a movie clip, is i grouped with other elements. This movie clip sits behind a mask. when i am in the movie clip i can see the text field, when i am on the root level (and the mask is disabled) i can see the text, but when i preview the movie the text IS GONE or I CAN'T SEE IT.
View 1 RepliesI've been trying to dynamically change some text for a titlebar that is behind a mask
However, I find that when I change the text of the dynamic text field (whose containing movieclip is masked by a graphic), the text no longer appears at all.
When i remove the masking, the text changes properly when asked, but when it it masked, the text does not show at all.
Any one know,how to mask a dynamic text field
View 3 RepliesI've discovered the joy that you cannot display dynamic text boxes if they are masked.After browsing the internet I found a few things to try, first embedding the font, which I have done, and that didn't work.The other solution involves setting the mask to a display object, which I've done, sort of.I create a Sprite() in code (I use Flex Develop, and never code on the time line), then use the Sprite.graphics to draw the mask, then set my main stage movieClip's .mask property to equal this layer.
View 3 Repliesi have the AS setting the mask, and my fonts are embedded.. but the dynamic text doesnt mask my other movieclip.my dynamic text is "fly_in" MC with the text field inside. the MC label is: "headerTxt_mask" the sheen is labeled "sheenMC" and put in a layer below "headerTxt_mask" in the same "fly_in" MC then on the first frame of my scene i have:
ActionScript Code:
fly_in.sheenMC.setMask(fly_in.headerTxt_mask);
The dynamic txt field is supposed to be the mask for the sheen, so all you see is the sheen...
why a dynamic text I create is not appearing or showing when being mask or when it is under by a mask layer?
View 3 RepliesI have a MC in my library exported for AS called list_item_mc. Here's its contents:A placeholder MC for an image with the instance name img_holder_mcA placeholder dynamic textbox with the instance name list_txtHere's my code Below it I will explain what's going on and what my issues are:
var loader:URLLoader = new URLLoader();
loader.addEventListener(Event.COMPLETE, onLoaded);
var xml:XML;
[code].....
I'm sure this has been asked in some way or another a couple of times before, and sually the first response seems to be..."are your fonts embedded?" Yes, they are. I am using a couple of different tweening classes (it happens with all of them). Basically what I'm doing is a simple sliding in and sliding out animation via the x and y properties of a movieclip. It only happens to a few movieclips, but some (not all) of my dynamic textfields disappear when doing this. When I click in the area that they are supposed to be, it magically appears. I have even tried creating the masks dynamically to stop the bug with no luck. It is very sporadic, but does anyone know/have experience with how to solve this problem?
View 9 Repliesis it's possible to create a similar effect to this menu:[Url] on a xml loaded text, in Flash. Would I need to create a mask and place it above the text then tween it's x position using tweener? would that work?
View 4 RepliesI have created a list of MC's with dynamic text via xml to create a list of mc Buttons. All works well as I wanted, but as th elist is too long i want to create a scroller for these, anyway when I apply the mask and test this all the text dissappears, they are there as the links all work but the text seems to have turned invisible, want am i doing worng.
I am creating each mc button dynamically like:
var venueBtn:MovieClip = new MovieClip();
var venueTxt:TextField = new TextField();
etc
why the text disappears when appling a mask
I have this text "my text is <b>bold</b> and regular".
I want "<b>bold</b>" to be... well, let's say... bold !
I have a mask layer under which there is a text field.
The text field shows htmlText, and i must embed chars. If not embedded, it doesn't display because of the mask. So the solution of importing 2 user fonts ( one bold and one regular) does not work.
im trying to scroll a movie clip that contains dynamic text and is covered by a mask. However when i publish the movie i cant see the dynamic text?
View 3 RepliesI have a movie clip (dnk) 7 (not key!)frames long, with 7 different objects (mc's) inside, named dnk0-dnk6.Then, on the mc (dnk) I have:
onClipEvent (enterFrame) {
strDnk = "dnk"+(_currentframe-1);
alpha = getProperty(strDnk, _alpha);[code]...
So, the idea is, to have this mc's (dnk0-dnk6) fading one after the other in a sequence. Which happens as it is supposed to, but what I am trying to do now, is reverse it. With no luck, as you can see from the top script .I was thinking about a solution in a way of telling when _alpha is below 0, than the _alpha would start to rise, until it reaches a hundred, then it would start to fall again.
Text is imported dynamically (xml) and populates to a movie clip which in turns masks other display objects on stage - Great. However, the text populating the field can be korean, and other times, english. I know from testing, latin languages will give the desired effect, but non-latin do not stand a chance. i have tried using _sans and _serif as well, without luck. Embeding Korean/Chinese/Japanese fonts is not an option, since these fonts are HUGE. What's the trick to making a dynamic text field mask?
View 1 RepliesI'm creating a playlist for a music player, and I've got the song names displaying correctly in my songTitle holder MC, but there's limited space for the song names to be shown in, and I'm going to eventually have it inside a scrolling movieclip. Problem is, the text inside the textfields disappear when I try to add a mask to the movieclip they're being loaded into. I've tried adding all combos of embedFonts, antialias, and blendModes I ran into, to no avail.how to mask dynamically created textfields with a non-dynamic (Flash IDE-made) mask.
Code:
for (var i:int = 1; i <= _size; i++) {
var pl_artist:TextField = new TextField;
//all embedFont = true and antiAlias commands no workie
}
first I had:
maskedImg = getChildByName("current") as MovieClip;
maskedImg.mask = mymask;
and everything worked properly. Then I removed the movieclip from the scene, exported it to Actionscript, and changed the code to
maskedImg = new mymovieclip();
addChild(maskedImg);
maskedImg.mask = mymask;
and now I don't see anything on the scene. If I comment out the line assigning the mask I can see the movieclip although. The mask is created dynamically in both cases.
I searched for a solution everywhere but cant seem to find one. I found the tutorial below on creating a dynamic mask that basically draws a mask over an image. I am basically trying to replicate the exact same effect only i need it inverted. I want to basically erase the image. Have the image there then with the mouse cursor erase the image.
I guess i would normally do this using blending modes or an actual mask on the timeline using layer but in this case the mask is drawn dynamically so im not sure the best approach. To make things easier to understand what I am trying to achieve is the effect of cutting a piece of paper using scissors and have the paper "erase" as i hover over the paper using an attached movieclip of scissors. I have everything working except the "erasing" of the paper.
I am wanting to create a dynamic mask for the transition in the Kirupa XML Slideshow tutorial. Instead of having a fade in, i would like to have an effect like the one here for the image transition.
View 1 Repliesi'm using this dynamic mask, originally coded by the canadian in an old thread, and i'm trying to get it to work in reverse (start with a full image and end with blank).
[Code]...
Can anyone tell me what I am doing wrong or don't know enough about masking to accomplish? Basically, I have a Sprite that serves as a mask. That sprite is populated with several small squares with tweens on them (using TweenLite).
[Code]...
This is my guess. Since each individual box is technically not on the display list, it is never rendered.Perhaps only once when you call the "container.addChild(box);" but other than that, it only displays it's old cache of the last render.
I am dynamically loading an image which I am dynamically trying to mask.
_root.createEmptyMovieClip("clip1_mc", 1);
_root.clip1_mc.createEmptyMovieClip("photo_mc", 1);
_root.clip1_mc._x = x;
_root.clip1_mc._y = y;
_root.clip1_mc.photo_mc.loadMovie("pics/pic1.jpg");
[URL]
I want to create a mask from an animated line. I found out pretty quick that you can't use a line to mask, only fills. So, can I convert the line to a fill as it's being drawn? Or do I need to put multiple instances of a shape along my line at intervals?
I keep seeing requests for an animation of writing. I figured it would be easier to have the text in one layer and use the animated line as the mask. It sounded good in theory.
I've attached my test that shows the line being drawn. I was playing around with some different objects to use as masks and that's how I saw that lines can't be used as masks. I wish they could.
I am trying to dynamically load images into this slideshow. I have 2 MC's, one with an animated mask, one without. I am trying to load an image into the first MC, have the mask reveal it, then load that image into the 2nd MC which is behind this one. This way, when the next image loads and has the mask show it, the other image will still be on the stage behind the new one, and so forth.Here is the excerpt of code from where the main actions are being done..
var myMCL:MovieClipLoader = new MovieClipLoader();
var myListener:Object = new Object();
myMCL.addListener(myListener);
var canMoveOn:Boolean;
[code]....