I hace this problem :
I have a rectangle that is on the top left of my screen it's width is 10px so if I want to make it bigger from left to right I do
ActionScript Code:
this.onEnterFrame = function() {
square_mc._width += 20
}
this works fine but now what do i do if I palce it at the bottom right and i want it to strech from right to left
ActionScript Code:
square_mc._x=900
square_mc._y=800
To size a rectangle I use the following actionscript:
Code:
function sizeRectangle() {
rectangle.onEnterFrame = function() {
with (rectangle) {[code]...
It all works fine.When a certain button is pressed it needs to size itself to zero again.This is easy to do by altering "w=(Stage.width);" to "w=0;". What happends is that it will shrink from right to left. But how do i code this when I want the rectangle to shrink from left to right?
I want to accurately find out the top left bottom right coordinates of an object. Let's say an rectangle.
View 2 RepliesFor those of you still with me, I am tasked with making some scrollable content in Flash. Load in a TextFile using LoadURL(), then display it. To get the text, we've written our own class TextFieldExtended, which is basically just there to give the textfile location to the constructor and then have the class do the various steps of getting it and loading it for you.So I needed to get a Scrollbar, which I got hereThe thing is, it works with Sprites.After trying to get it to accept TextFieldExtended, I bumped into a block, since the scrollbar relied heavily on a Sprite property that TextFieldExtended didn't have or could have.
So I tried adding the TextFieldExtended instance to a Sprite instance using addchild.A problem occurs here that I do not know how to handle. It seems that a Rectangle is drawn and the Text is drawn on that. I say this because the scrollbar moves the Rectangle up and down a bit, but the text doesn't scroll, just the Rectangle it is positioned in and the text then moves along with it.My question: can this be fixed, or is does this implementation of scrollbars need a lot of adaptations before this is possible?
I draw a rectangle i should see a little bold circle to indicate a perfect rectangle, I seemed to lost mine, can somebody please tell me how to get it back!
View 2 RepliesI am trying to convert a rectangle(actually multiple rectangles) to a curved rectangle. I think it should be pretty easy but I guess i am stupid. Basically I would have a start position and stop position (many of these), and they would be converted to curved rectangles and follow in a cicrle around.
View 0 RepliesI would like to create a rectangle inside of a rectangle, starting approximately 15% inward from the right side of the other rectangle.
I know how to create rectangles with:
Code:
var newHotRect:MovieClip = new MovieClip();
newHotRect.graphics.beginFill(0x00FF00);
newHotRect.graphics.drawRect(0, 0, 100, 100);
addChild(newHotRect);
But how would I make another rectangle on top of that (the black one pictured) that is approximately 15% from the right?
I toyed around with .right, and .bottomright with no success. Can anyone lead me in the right direction? or even finding the x and y of the upper right or bottom right side of a rectangle?
how to respond when a rectangle hits another rectangle? I already know how to detect the collision, I just don't know how to respond to it. I'm just trying making a simple side-scrolling platform game where I have platforms I can walk on and bump against on all sides. I have searched everywhere and just can't find the tutorials I'm looking for.
View 6 Repliesi hav a left right moving thumbnail gallery from xml, i need that on the last image image come on focus from the left side so automatically the left button will be disable or opacity goes 0 anything and same thing from right side also.
View 14 RepliesI have a series of thumbnails that should scroll from left to right & right to left when you roll over the movie clip buttons on either side. IT was working in another flash movie, but I moved it to a different flash file and now it's not working. The hit buttons within the movie clip buttons have this action script:
[Code]....
looking to create an image/mc slider that moves form right to left via user clicks of a left and right button.I would assume I would create an array to hold a series of mc's in (my images) and then tell the left and right buttons CLICK events to move linearly through the array (displaying next in line and previous etc.
View 1 RepliesI've some components with dynamic heights. They have to be aligned with respect to the bottom of my canvas container, so I cannot set the same y for all components.
I could compute their heights and successively set the y but I was wondering if there was an easier way to do it.
I have an Image called "PanoramaImage" (which is very long in width). I want this image to move from right to left & from left to right automatically.
I am using flash as3. I am loading this image from the same folder where the .fla file exist. my image to move by using Up & Down arrow keys.
The following is the sample code i found on web.
var loader:Loader = new Loader();
loader.contentLoaderInfo.addEventListener(Event.CO MPLETE, completeHandler);
loader.load(new URLRequest("panorama.jpg"));
[Code]......
I have an Image called "PanoramaImage" (which is very long in width). I want this image to move from right to left & from left to right automatically.I am using flash as3. I am loading this image from the same folder where the .fla file exist. Right now I have the code which will help my image to move by using Up & Down arrow keys.The following is the sample code i found on web.
var loader:Loader = new Loader();
loader.contentLoaderInfo.addEventListener(Event.CO MPLETE, completeHandler);
loader.load(new URLRequest("panorama.jpg"));
var content_mc:Sprite = new Sprite();
[code]....
My vision is to have a colored square at the top of the site Im working on which should span across the entire browser window. I have created a square 1280 x 100 pixels in size and imported it to the stage, alignment is set to x=0, y=0 ad alignment. The scene is the same size as the square I 've imported. When I view my Flash creation its displayed 8 pixels from the top left corner of the browser window. The flash file only contains the square and nothing else. take a look at the 3 files I've attached: issue-scrreen1-3.jpg. The first 2 screens are my Flash, properties and library screen shots. The third screen shot is my browser window.
View 2 RepliesI have a movieclip with the instance name of top. I want the box to grow from right to left, not left to right. Here is my code:
[CODE]...
panning my content from left to right (with stop as intervals) then right to left (also with intervals)
1. I created an mc (name: "content")Notice in this mc, I layout 4 sets of text (like a page) from left to right
2. I created another mc (name: "pancontent_mc")
-I added a layer for "content" and created a motion tween for it to pan from left to right
-I created a mask layer on top of "content" that will show 1 set at a time
-I created an action layer that has total of 4 stops(); on each frame where the 4 sets of text will show directly under the mask.
3. maintimeline -There's only 1 layer. I placed an instance of buttons (left/right) and an instance of "pancontent_mc"
4. actions for right button, works fine and stops on each set of text.
on (release) {
this.pancontent.play();
}
5. actions for left button - none. I havent figured this out yet.
on (release) {
this.pancontent. - something like play previous frame until stop...
}
I have an asset management system which loads a bunch of external swfs, and when requested distributes copies of those swfs to other parts of an app (it creates instances of the classes to do this).Anyway, when I use these loaded swfs somewhere and then remove them Flash does its trick of leaving the sounds running (as they are triggered by timers).If they were Loader class items I could use .unloadAndStop() to shut them up and get them garbage collected, but they aren't of course.I thought I might be able to extend the Loader class and set the .content my self - which I have done by overiding the content getter in Loader. I was hoping I could then use unloadAndStop on that class but nothing happens. I've tried casting my fake Loader to a Loader as well and no joy.
View 4 Repliesextending the tween class?
View 6 RepliesI'm using AS2, and trying to use AS2's packages for the first time, so I can organize my .as files properly. I'm running into some problems though I've got some classes that extend MovieClip, and I've put the class names in the Linkage>Class fields. When I publish, though, I get the error: The class or interface 'ClassName' could not be loaded. anyone know what I'm doing wrong? I tried importing the classes on the main timeline, and even including the directories of those classes on the classpaths list, but no dice
View 1 Replies this cursor follow works in a single frame on the main timeline with a stop action :
// kisses start and follow cursor
addEventListener(Event.ENTER_FRAME, start_kisses);
function start_kisses(event:Event) {
staged_kiss_mc.x = stage.mouseX;
[code]....
How can this same function be called in various frames throughout the main timeline? For instance, say the above code is on frame one and the "staged_kiss_mc" is extended from frames 1 to 10. On all frames there is also a stop action (along with additional code, content, etc.)How can the function "start_kisses" be activated on each of the 10 frames in the same way it is on frame 1 ?Is it necessary to add a new Event Listener? Do new functions need to be coded for each frame, such as start_kisses1, start_kisses2, etc.? --Or can the same original function be reused?
I found this sentence while googling out for Flash help: "Add 3 frames to your timeline. Drop a TextField on your Stage & make sure it extends over all the 3 frames." I was not able to accompolish the second task of this. I added the frames, dropped a TextField on the first frame, but could not find a way to extend it over all the 3 frames.
View 9 RepliesI want to add a property to the MovieClip class. I just have a bunch of MovieClips that are placed on the stage by reading an XML file and creating lots of clips according to the information in them. Now, I need to know which MovieClips were created below previous clips, and I figure that the easiest way to do so would be by extending the MovieClip class and add an order property.I have some problems though: I don't know how to set or get this order property within the main clip, I don't know how to place this clip within my movie, and I don't know how to create them dynamically (do I just do something like var myNewObjectOfExtendedClass : myExtendedClassName = new myExtendedClassName?)
This is the code I have on my extended class, called Expando.as:
[Code]...
When I open a new Flash CS5 project, the timeline grid only goes out to 600 or so frames. I have a three minute audio track that I want to insert at frame 1, and at 24 fps, that means it should end around frame 7200. So what I want to do is to extend the grid out to 7200 frames - before I drag my audio clip in, or once I have it in. If I set keyframes at 1 and 5, say, and drag my audio track in at frame 1, it appears that it will play all the way through using the controller, but my timeline grid is still only 600 frames long, and if the next thing I want to do is something that happens at frame 6000... I still can't get there.
[Code]...
I made the transition to AS3 two years ago, but I still carry with me old AS2 habits. Could someone please help me understand how I extend a custom class correctly. I have the bad habit of putting most of my code in one .as file (the Document class), but I use a few custom classes now and then. What I'm tring to figure out is how I would extend a class of this type:
public class ClipDragger {
private var _clip:MovieClip;
public function ClipDragger(clip:MovieClip) {
_clip = clip;
[code]....
For example I would like to add a MOUSE_MOVE listener, and also add actions to the drag function.
when extending a flex component and trying to use it, I get a RTE. I.e. I am extending a DataCanvas and am using it like this:
<MyComponent dataProvider="{dataProvider}" width="100%" height="100%" x="0" y="0" id="dc" verticalCenter="0" horizontalCenter="0" />
Has anyone seen this? How can I get around it?
[Code].....
I have set the itemrenderer package like that:
[Code]...
However when I include the following lines in my AdvancedDataGridColumn tag,
[Code]...
My current requirement: I have menubar with 3 different button types. Skin structure is simple: one label and two state graphics. So my base skin have label, and in overridden i want add two images. But flex docs states that overriding of skin is not preferred. I try override override public function addElementAt(element:IVisualElement, index:int):IVisualElement for adding new subcomponents to custom container sdk using it but my view is blank. Does skins are really not overridable? My current code:
<s:ButtonBar skinClass="MenuSkin" dataProvider="{content}" />
in MenuSkin:
...
<fx:Component id="firstButton">
[code]....
and next 2 skins have repeated <s:Label/> part. As label should look the same, naturally i want extend base skin class but it is no possible form me. First problem: if i add image in mxml it overlaps label.
How should I dispatch Events in my objects without having to extend the EventDispatcher?
View 6 RepliesSo I have a quick question. I have an xml document that has a list of items. Some with links, some without (i have removed the links for this example as I am not allowed to post links here). This works fine until my list extends passed the textbox (scroller) that I am inserting them into, at which point the list simply disapears. I am not trying to get the box to grow in height, I have a scrollbar attached to it.its the second list that gives me the problems.Actionscript:
ActionScript Code:
function loadXML(loaded) {
if (loaded) {
[code].......
