ActionScript 2.0 :: Load A Movie Which Fades Out The 3 Buttons?
Jun 23, 2009
A while ago I had a problem. But the solution was beyond my understanding, so that's why I ask it again ...
I have a button named
"Eric_btn",
but in this button I have 3 movieclips due to the shade I had to put in.
The name the hit button =
"Erichit_mc"
Once you have pressed the button I want to load a movie which fades out the 3 buttons. Once the fading out had finished I want it to load a website.
[Code]...
View 5 Replies
Similar Posts:
Feb 23, 2009
I need a button initiated cross-fade. This, for me, began as a MooTools adventure, but I've been advised by the JS developers on MooTools to pursue this with Flash. For reasons that I'm that I'm sure are obvious to you AS wise ones.I've just joined AS.org joined and have just used Awilderbeast's cross-fade AS3 snippet here:Awilderbeast's code being [my needs are explained below the code]:
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
import fl.transitions.easing.*;
[code].....
View 0 Replies
May 27, 2009
I want to know the actionscript for when hovering over a button which is a picture, the whole screen fades into a translucent grey (with everything else still in the background) and have a larger version of my picture appearing on top of the grey. And when the mouse leaves the button, the grey and the larger version of the picture will fade out and return back to my original.
View 3 Replies
Feb 12, 2009
I Have 3 Movies:MAIN.SWF, contains loading movie actions for Nav.swf and Home.swf.NAV.SWF, contains navagation menu loaded on Level 2 in Main HOME.SWF, contains slideshow for home page loaded on Level 1 in Main In NAV.SWF, there is a MOVIE CLIP "graphmc", which contains a BUTTON "graphicbtn", When this button is clicked, I'd like the HOME.SWF (which is loaded into Main.swf on Level 1) to fade out and unload, and load and fade in Graphics.SWF in place of it.
View 6 Replies
May 7, 2002
This is my first post here and it my be a hard one to understand? Overview I have four buttons on the main stage (info) (help) (bio) (main) When you Rollover a button it fades to another color/when you rollout it fades back to the original color I have a script that does the color change because I do not want to use motion tweens. Here is what I did I made a 2 frame MC named infoMC In the 1st frame of the MC I made the word (info) a nested MC and attached the color change code to it. The 2nd frame of the MC Is the same as the 1st frame but I revesed the color change
[Code]....
View 8 Replies
Nov 4, 2003
I have the following script on a movie clip which fades the clip in when your mouse is over the MC and fades it out when your mouse moves off. It works fine, but it "flickers" when its faded in all the way. How can I stop that?
[Code]....
View 1 Replies
Oct 1, 2003
I have a movie. In it are some buttons and a dynamic text field. When I press the buttons is should load text from a database into the dynamic text field. If I run the movie by itself (ie. not by LoadMovie()-ing it into a different movie) the dynamic text field gets filled with text and all is well and good. However, when I use LoadMovie() to load this very same movie into my main movie, the buttons no longer work; the text field stays empty.
[Code]...
View 9 Replies
Oct 2, 2011
Im trying to load an external SWF on to a parent SWF with AS3... When I'm editing the code I get no errors, but when I test the movie I get this error.[code]...
The file I'm trying to load is called PhotoViewer.swf... But that file physically has nothing on the stage all it has is in the publish settings, at the action script settings in document class it says PhotoViewer, a .as file which I have... Its like a gallery and it uses an XML file... I want to be able to switch back and forth between 2 "Photoviewers" loaded by the buttons, only displaying one at a time. So I wonder if this affects the loading of the SWF or my code is just bad...[code]...
View 1 Replies
Jun 28, 2005
I�m planning to make a magazine in Flash, and I would have to load several pages of it in order. But I�d like to put the buttons forward and previous on the main movie and make then load each page in a container.Is there a way to set variables for each page so the main movie "knows" what movie is loaded at the moment and what page it has to load next.
View 5 Replies
Dec 28, 2011
In my 1st frame I have the following action script and it works fine.
cal.addEventListener(MouseEvent.CLICK, function(){gotoAndStop( "cal" )});
trucks.addEventListener(MouseEvent.CLICK, function(){gotoAndStop( "truck" )});
raven.addEventListener(MouseEvent.CLICK, function(){gotoAndStop( "raven" )});
frank.addEventListener(MouseEvent.CLICK, function(){gotoAndStop( "fr" )});
[Code].....
I've posted a lot of code below. It still loads / traces fine on frame 1. On other frames only the last two come up in a trace (though they should all be the same). Then when returning to frame 1 they are all null.
View 1 Replies
May 24, 2009
So I want to make some movie clips function as buttons to load some external swfs. I have this action script on the mc's:
on (release)
{
loadMovie("Chuck.swf", "motionmc");
}
It was working when it was a button, but now nothing happens?
View 2 Replies
Nov 2, 2009
I had to create a menu using array and I had to animate it. With some great expertise from people, I've accomplished that. But now I have a question about OOP, because I'm trying to add functionality to the buttons to load swfs into my main movie. Even though I strictly follow tutorials and exercises, I can't figure out how to reference a variable made in one class to another. For instance, I have index.as, navbar.as, and menubutton.as. I assume I need to add a loader to my index.as. But I can't trace the loader in my other classes. I've been told to effectively accomplish this, it is best to use custom event dispatchers. But I'm lost on how to use them.
View 12 Replies
Jan 11, 2004
I have a problem with buttons and transitions.I have two buttons onstage (they're inside a movie clip) inside the movie, on the button one I have the following code:
on (release) {
if (_root.externaltwo._currentframe == 7) {
_root.externaltwo.gotoAndPlay(8);[code]....
I have similar code on button two and this does indeed make the buttons move into place as required. My problem is this, I need to load in external swf files into an empty movie clip on the main stage called container. These External SWF files have transitions and this is where my problem is. If I place a normal button on the stage it works but not if the button is inside a movie clip and has actions applied as above. The code next is what I have believe should also be placed on the button to make swf transition one load in.
on (release) {
if (_root.currMovie == undefined) {
_root.currMovie = "externalone";[code].....
Obviously a similar code would be placed on button two so the transitions could take place.I am uploading my file so you can see exactly what I am talking about. Also in this file will be a folder containg a version that works but without the buttons moving up and down which is the effect I wish to have
View 4 Replies
Nov 18, 2007
i used kirupa's [URL].. tutorial to create a movie with buttons that load external movies and works seamlessly.
my problem is that i want to do the same thing on the external movies that are loaded so to be able to load new external movies on top of them. it does not work and i know its because of the _root script that gets messed up when a new movie is loaded. it has to become _parent or smthing but i can't seem to be able to make it work..
View 4 Replies
Jan 11, 2004
I have a problem with buttons and transitions and it is similar to a problem I had a couple of days ago that I posted and that was sorted out. I have two buttons onstage (they're inside a movie clip) inside the movie, on the button one I have the following
[Code]....
I have similar code on button two and this does indeed make the buttons move into place as required. My problem is this, I need to load in external swf files into an empty movie clip on the main stage called container. These External SWF files have transitions and this is where my problem is. If I place a normal button on the stage it works but not if the button is inside a movie clip and has actions applied as above. The code next is what I have believe should also be placed on the button to make swf transition one load in.
[Code]....
View 4 Replies
Aug 7, 2009
I have a movie clip with 15 frames. Each frame has buttons on it (mc's)... I was going to put the actions on the main timeline/stage and navigate within the MC from the main timeline. Is that possible? I can get the buttons on the first frame of the MC to work, but I can't seem to figure out how to target/make the buttons on the other frames work? I was thinking I could identify the path of the MC with the frame labels, but that doesn't seem to work. like: _root.RMChanger.(frame label).buttonOnFrame = function
I have to move a text box in and out over the MC backgrounds on the main stage... which is why I was thinking to do it this way? I've been switching back and forth bwtween AS2.0 and 3.0
View 9 Replies
Jul 25, 2007
I am creating a navigation bar in Flash (which will then be used in Dreamweaver). When you mouse over each topic in menu (ex. Products), i want it play a movie clip (so it shoots out a sub-menu underneath). so far so good, but the only thing is, the sub-menu won't stay open in order for me to click on buttons in it. For each button, I assigned it the Behavior to go to a url. Also, I tested the buttons within the mc and they don't seem to direct me to url. do you think maybe it's because it's nested within the movie clip?? Is there an easier way to go about this?
[Code]....
View 2 Replies
Nov 24, 2009
I am using Flash CS4 with ActionScript 3 and I am fairly new at it. I am struggling with two things.
1. How can I start a movie clip while scrolling over a button? I know how to start a movie clip when a button is clicked.
2. How can I use multiple movie clips for seperate buttons?
[URL]
View 3 Replies
Feb 25, 2004
i'm having this weird pb i don't understand, could someone help me? i'm driving crazy here..what i do is load a movie from a movie but the 2nd movie load a variable. when i test the 2nd movie, it loads its variable and displays it as wanted, but when i load it from the 1st movie, the 2nd movie loads but seem not to load anymore its variable..
[Code]...
View 11 Replies
Nov 6, 2010
Im creating a microsite, in which the background colour changes depending on which section you are in! I want it so that when i go on one section the current background fades out as the new on faids in!Ive got the fades in's sorted, however is there some sort of script that i can put in that tells the current background to faid out??Also say im in the red section and then want to load a diffrent aspect of the red section! I dont want it to re-load the Red background! Is there some way of achieving that?? My first throught was to use some sort of IF statment, however im not exactly sure how i do this?
View 4 Replies
Jun 2, 2008
I am not very code oriented, but I found this code that I altered for my needs, and it works, as you move your cursor towards the bottom of the screen the movie clip fades in. However, in addition I need one that does the inverse where another mc fades in as you approach the top. Does anyone know how I would acomplish this task?
[Code]...
View 4 Replies
Sep 6, 2010
when I enter a symbol by default everything around that is not part of that symbol becomes faded - is there a way to disable this?
View 4 Replies
Dec 3, 2009
I'm currently making an animation which will eventually exceed the 16,000 frame limit (don't ask haha), so, short of making two movies and having to just start up the next one, what is the code for loading a movie? I presume they need to be in the same directory? So basically all I want is on the last frame of the movie the code executes and the second movie file opens up and starts. I guess I'd want the current movie to close, too.
View 1 Replies
Feb 13, 2009
here is my issue, so i have a main page with a slideOut movieclip which basically is a movie clip button and the "over" state sends a tray out of the movie clip with info and anothe rmovie clip button. i cant seem to get that movie clip button to root.gotoAndPlay("frameLabel");i have the actionscript on the same frame as the movie clip i need to act as a button. but it just doesnt seem to react to it.i have tried going to the main timeline and doing
blank_mc.blank2_mc.onRelease = function();
{
_root.gotoAndPlay("frameLabel");
[code]....
View 4 Replies
Mar 25, 2010
I am creating a little flash movie, nothing major and I want something to happen. When a user rolls over a button, a image fades in somewhere else on the stage, possibly below the button being rolled over. Then when its clicked (the button) the image (possibly) expands and text is showed while the background is faded.
View 5 Replies
Jul 21, 2009
I have a movieclip that effectively functions as a button, which we'll call BtnA. When I click it, another movieclip containing the content (CntntA) fades in (this mc is on another layer). Then when I click another button (BtnB) CntntA fades out and CntntB fades in. I've got all this working fine for now, but the problem I have is that once BtnA is clicked, it is still clickable and it fades CntntA back in even though it is already active. Is there a way to disable BtnA after CntntA has appeared? So u can still see it, but you cant click it? Obviously I'll need to do this with BtnB and any future buttons I add
View 1 Replies
Aug 4, 2009
I am making a web page with about 13 buttons. some are dropdown menu Items.I would like to have a background linked to each of the buttons, such that when I click on a new button the background fades into the new background.
example: I am at my home pag, and the background picture is a tree. you click on my about button, and the background fades into a picture of a book. you click on my contact button and the picture fades to a house. then you click back on the home button and the tree fades back in. If you are at home and you click on the home button the picture should fade into the same picture etc.how to do this without creating each one of the fade transitions manually.
View 3 Replies
Mar 27, 2010
im going through something that is driving me crazy.... i have the following code:
[Code]...
what it is supposed to dois the images fade in, then a mask animation loops... but what is happening is that the image flickers really quick, then it fades in... not sure why this is happening.....
View 1 Replies
Mar 22, 2011
I'm doing some pretty simpe text fades in flash by changing the alpha from 100% to 0% for a piece of text.This works fine in the SWF export, but when I export to AVI the text corrupts (shifts, expands and looks interlaced) during the fade portion.I've tried doing this with a brightness shift, and even ticking he "cache as bitmap".I tried exporting as 32bit movie with alpha. That stops the corruption, but now there's a flicker juse before the fade that's not there in the SWF!
View 4 Replies
Mar 15, 2005
i was talking to someone @ my school about dynamic scripter color fades? he showed me an example of his script and it referenced color a value of 9126315.i asked what that was and he said he's using hex color and rgb? anyone know anything about these? im kinda familiar with the other values 0xFFFFFF and #8C2C0B but im clueless as to this one? any takers?
View 4 Replies
