is it possible to keep the loaded movies and then attach them to a mc ? The thing is that I have several external resources to load and I wish to attach them pour MCs along the execution of the movie.
View 2 Replieshow to keep track of loaded MCs? I have a navigation system loading content MCs. The problem is, when I choose another nav button, I want it to (onPress) figure which clip is currently loaded then gotoAndPlay a frame label in that clip, which will play an exit animation and load the content area corresponding to the newly pressed button.
Someone on Flashkit suggested having the loaded content MC send a variable to the main time line to act as a kind of flag to say which section is active but I'm not sure how to go about doing this.
Im making a game in which you controll some gattling AA guns..you start of with one and can later buy more...the gattling gun itself consist of 3 different movie clips and 1 text box (dynamic)WHen you buy more gattling guns later on , i just want to duplicate the original gattlinggun and let you place it anywere on the ground you want...
Firing is all good and dandy, each gun aims at mouse cursor and spews out bullets.. but for added realism ive made it so that each gun Can Jam (short delay befre can fire again)this does not work however because (as far as i can tell) what happens in 1 movie also happens in the others, so if 1 jams(the dynamic text box changes to JAM) all turrets get JAM in them(sticky i know)... now i want to know how do i make each movie completly separate , so they do not inherit properties from eachother...
I have recently launched a site for a client which includes an interactive flash element on the home page but it takes a long time to load (10-30seconds). I have followed advice from others about keeping image small and link movies rather than embed but still slow, the swf file is about 7.9mb which i thought was ok for the size of flash file. Does anyway else know where I have gone wrong whether it be the embedding or some other area.
View 5 RepliesI have an intro.swf file that is basically a movie with sound that is exported for actionscript but not exported in the first frame. I just stuck it in a movie on my timeline and it works great and the preloader works because it doesn't load the sound before the preloader. I use :
musicSound = new Sound();
musicSound.attachSound("music");
musicSound.start();
to play the sound in intro.swf.
However, now this intro.swf gets loaded into an index.swf and everything works fine and the sound plays as long as I have the sound included in BOTH the intro.swf and the index.swf and the sound is exported on the first frame in the index.swf. I was hoping I could remove the sound entirely from my index.swf since it already loads into the intro but so far
I have always the argument with my colleagues which authoring strategy to use. I always attached to the idea of authoring several swf files, and have them all loaded to the main swf when needed. And than attach Preloader to each swf that I load.
Others think that it should be only one swf with one preloader. And have all the navigation to use scenes or goto actions.
So the advantage of using my strategy is that users will not wait too long for one movie when its being loaded. And its more convenient to work on several fla with each have its own layers, symbols, etc
I want to create a website having one main stage file(main.fla) with different swfs(movie1.swf, movie2.swf,movie3.swf) for various sections. Am not sure what I am doing wrong here but somehow when I click the button it does not load the respective flash file
View 6 RepliesI am creating a presentation which has a main flash and then 3 sub categories to it. Main.fla is nothing but a container to load the other movies into. I could get the the first movie (movie1.swf) to load onto main.swf by using the foll code:
this.createEmptyMovieClip("empty_mc",1);
empty_mc.loadMovie("movie1.swf");
empty_mc.x=0;
empty_mc.y=0;
Now the problem is in movie1.swf the menu is like on the 3rd level, i.e. main stage>menu_mc>menu (where the buttons are).
How can I add a code on level "menu" so that when I click button2 or button3 it loads movie2.swf and movie3.swf respectivley onto the main stage. Makes sense or am making it too confusing..
I want to try this breaking a big movie into smaller parts functionality so that I can understand flash more.
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.
I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)
I want to know if my flash header can support the following additional functionality/changes:
1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?
2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.
4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?
I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features. Not sure I can afford help now because of being laid off and two different scammers taking advantage of me. So I'm going to try to do myself and see if there is any suggestions/support on here that can help. I have Flash CS4.
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. I want to know if my flash header can support the following additional functionality/changes:
1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?
2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.
4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?
I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features. Not sure I can afford help now because of being laid off and two different scammers taking advantage of me. So I'm going to try to do myself and see if there is any suggestions/support on here that can help. I have Flash CS4.
i have a photography website, the main 'index.swf' file has two scenes, one for the loader and one with the content.i have a navigation menu:item 1, item 2, item 3, and so on. i have 10 layers, my nav menu is on layer 10, at the very top.i also have a a layer for each one of my navigation menu content. Now i click on item 2, and i load a external movie clip called "fotos_mc" on to the stage and inside this movie clipe i load pic1.swf using: loadMovie ("pic1. swf", 1);it loads fine, except that it loads on top of my navigation menu, logo and so on, even it's on a layer that's under the layer where i have placed my menu and logo. is there a way that i have load my movie so that it displays behind my menue?
View 3 Repliesi am trying to create a swf file that contains 3 movie clips inside of it. i want the swf file to randomly choose one of those movies and play it.
i am on a mac with flash cs4.
is it possible to keep the loaded movies and then attach them to a mc ?The thing is that I have several external resources to load and I wish to attach them pour MCs along the execution of the movie.
View 2 Replieson one of the tutorials to load a movie it teaches you how to load with a button...
but.onPress = function () {
_root.createEmptyMovieClip("container", 1);
loadMovie("loaded.swf", "container");
[code]....
i want to load an external swf movie into the main swf movie. now ive been using the loadmovie script and it works fine but the loaded movie comes up in the top left of my site so my ? is, how can i specify the location of where my loaded movie ends up
View 3 RepliesI got some movies loading in a container, but the movies stay open, I want to be able to "close" the container, or hide it when I click on other navigation buttons that are included in my main timeline.
View 3 RepliesBasically I have a primary navigation and secondary or nested menu on one menu item. The following load movie script works fine on the primary menu on the root:
about_mc.onRelease = function() {
createEmptyMovieClip("container2", 1);
loadMovie("about2.swf", "container2");
[code]....
how can i load 2 .swf movies simultaneously through one load movie action button ?
View 7 RepliesI read the tuts on dynamic loading etc (the one about external stuff like mp3s, jpgs, swfs; and the one with the transitions). I'm messing around with it in MX and all works fine, except the problem I have is I cant check it locally! the bandwidth simulator and profiler doesnt seem to work with loading external content, the movie appears immediately.
So I tried loading the swf from the web (i.e. URL = file://[URL]) that gave errors "opening file" (the movie is there though). my only solution so far is to keep uploading my movie everytime I wanna check it!!! which is CRAP! I dont have a network at home, so cant really use those bandwidth simulators I saw on the sticky. basically I juz wanna load an external movie, and see how the parent movie handles it (i.e. progress is kept track of correctly, loaded notifications work etc.) how can I check all this locally?
I got this tutorial about external movie loading. It works but it seems that their is a little problem with it. How do you keep the button from loading an external movie once it's loaded already?
[URL]
Let's BUTTON-1 loaded MOVIE-1, now when you click on BUTTON-1 again it will load the movie even if it's loaded. How do you do it like only when another button is clicked will it load the movie for that button.
I have a bit of an actionscripting dilema... I am trying load a movie ontop of another movie, so they are at different levels. This I can do ok, its just that when the new movie is launched and sits ontop of the old movie the buttons from the old are still active and interfere with the top movie. I know I could unload the old movie underneath, but my problem is that I want the user to be able to close the top movie to go back to the bottom movie at the place that they left it.!
View 5 RepliesI subscribe for this forum becausethis r the actions i have in my level 1
on (rollOver) {
startDrag (this, false, 250, 270, 750, 520);
Mouse.hide();
[code].....
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)I want to know if my flash header can support the following addionalunctionality/changes:1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features.
develop a header splash like you see on many sites now.I have a few ideas. One is a list of images or clips with images embedded.On load teh first image loads up, then after a set time (30 secs),the second image fades in, the first fades out,and etc.looping.
View 8 RepliesI have a series of movies in my library (called page1, page2, page3... page87) and I'm looking to load the first one into a blank movie (called pageHolder).Using 'next' and 'previous' buttons, I then want to unload and load the next in the series of 'pages'. I'm trying to work out the best way to do this using addChild and removeChild, but not having much luck. I've read that the best way to do this entire sequence is to set up an array, but I have no previous experience with arrays.
View 2 RepliesI have 5 movies in my library, called question0, question1, question2, question3, question4. I linked them with export for actionscript. I have an Array, called questions. Then I have a button that calls the getQuestion function. But I get the following error:
[Code]....
I used a sample of macromedia to get a XML file with the names to the swf files i want to import in the stage. That works (for now). But now i also want to at a link (using getURL();) to the movieclip where the swf file is placed.
PS. i used gallery_tween.fla from the sample folder if someone wants to know...
Using Actionscript 2, I'm a bit new to all the scripting stuff.I have a loader loading a couple of flash movies like this:loadMovieNum("sound.swf", 1);loadMovieNum("logo.swf", 2);loadMovieNum("mainmenus.swf", 3);Those 3 movies I need to go to the main section of the site. However, I would like the loader to also load the remaining movies needed to further navigate the site, but without displaying them now Kind of like 'caching' the rest of the site, so when the access is needed, there's no load time.
View 9 RepliesI have three (3) buttons in my main movie. And I just realized that everytime I press the "about me" button, it keep loading, reloading, the same movie. Its kinda lame! So I searched for VARIABLES and thought I could work my way around it.What I did was, on the first frame of my movie, I declared 3 variables; namely:
PHP Code:
var portfolio = false;
var aboutme = false;
[code]......
I have a rotating menu that when clicked rotates and loads in swf movies, OnClick.
The problem I seem to be having is that because the swf movies load in on click it seems to be causing the rotation of the menu not to run smooth.
Question: Is it possible to get the swf movies to load in once the action of the click has completed its action. some kind of 2 second delay before the movies load in??
what happens: you can click or mouse scroll through the menu, when you click, the action repositions the selected Item (ActiveItem) in the center and resizes larger. this works great, is it possible after this action is complete to then load in the swf movies???
to see how the movie runs at the moment this is the link: [URL]
you will see at the moment onClick the movies load straight away which makes the rotation not smooth when rotating around.
I can't seem to get the mouse scroll to work the same function as the click at the moment also.....thats for another day