I have an XML file that I am pulling thumbnails from. I would like these thumbnails to be links, but for some reason onRelease does not work on my movie clip created with createEmptyMovieClip.
I have this theory that my onRelease function is being called before my thumbnail image is fully loaded, but I may be completely wrong. Here is some example code of what I am trying to do.
[Code]...
I'm creating a movie clip with AS:
Code:
this.createEmptyMovieClip("pool", 1)
and I'm also loading an external .swf in:
Code:
player.loadMovie("mp3player.swf");
How do I load the external .swf in "above" the movie clip being created by createEmptyMovieClip? It is always on top of it, on the highest depth, and I'd like the mp3player.swf to be on top instead.[URL]
c_mc2 = _root.createEmptyMovieClip("main_text", 4);
c_mc2._x = 0;
c_mc2._y = 359;
If i use this method to create an empty clip and then once i am done with the clip i unload the movie which was previously in it, what happens to the clip. Do i have to re-create it if i want to reuse the empty movie clip again with the same name?
Q1) The registration point of a created clip is top left - my question is how can I dynamically change it's registration point - say to center center?
(I am trying to attach a movie clip to a created clip and I wanted it to be centered inside the container - a related sub-question, how can I find the x-y coordinates of the attached movie clip within the created movie clip?)
Q2)When I tried to create two different movie clips, I found I had to create them at different depths, else the first would load and the second would not. Why would that be so? I'm on MX 2004 Pro.
resizing a movieclip created with createEmptyMovieclip.I tried changing the property using setproperty,the result : no image shown at all.. i think i stting a property for a wrong movieclip.....
Code:
addressVars= new LoadVars();
addressVars.load("http://localhost/test/flashmx_dbPassReturn.php");
addressVars.onLoad = function() {
[Code]....
From the flash help, it says:Method; removes a movie clip instance created with the duplicateMovieclip action, or the duplicateMovieClip or attachMovie methods of the MovieClip object.
But i have movieClips created from createEmptyMovieClip();, so i'm assuming removeMovieClip(); won't work. Is there another way to remove this then?
As the title suggests i want to apply physics (gravity mainly) to a line drawn with the curser using the createEmptyMovieClip method.Below is the code in the main frame (sorry its a bit long), what I'm trying to do is make something like crayon physics (i know it will be difficult).So far i can draw lines and make certain objects ( a ball for example) be affected by gravity, but when I try to make the drawn lines be affected by gravity it stuffs up.he first line drawn is produced in the wrong position, (it should be at mouse point but isn't) and you can't draw any subsequent lines. This problem doesnt exist when i remove the gravityBasically what i want is that each line that is drawn can have actions assigned to it... (so i can add gravity and unique properties for different line types)
//force settings
//Drawing tools
_global.general = 0x0000FF;
[code]....
I know it is possible to attach a class to a movieclip that exists in the library by checking 'Export for ActionScript' and specifying an 'AS 2.0 class' for that symbol.
I would really like to know if it's also possible to attach a class to a movieclip that was created by using the 'createEmptyMovieClip' method.
I'm trying to create a movieclip and load a "frame" image inside of it, then create another movieclip inside of the first, and then load another picture inside of the second. Something like this:
var thumbFrame;
var thumbPicture;
thumbFrame = container_mc.createEmptyMovieClip(thumbFrameName, 1);[code]..........
But it doesn't seem to work the way I want: the "thumbPicture" doesn't appear on top of the "thumbFrame" as I expected... only the "thumbFrame" shows (with it's image succesfully loaded). Am I missing something?
EDIT: If I comment this: //thumbFrame.loadMovie("thumbFrame.png");
The thumbPicture.jpg shows inside of the first movieclip, so maybe the issue is with the .loadMovie?
I have a movieclip I created usind createEmptyMovieClip(). How can I assign a Linkage Id to that clip?My reason for this is I later want to attach that clip I created to another clip using attachMovie() which requires a Linkage Id.
View 9 RepliesI know it is possible to attach a class to a movieclip that exists in the library by checking 'Export for ActionScript' and specifying an 'AS 2.0 class' for that symbol.
I would really like to know if it's also possible to attach a class to a movieclip that was created by using the 'createEmptyMovieClip' method.
I know it is possible to attach a class to a movieclip that exists in the library by checking 'Export for ActionScript' and specifying an 'AS 2.0 class' for that symbol.
I would really like to know if it's also possible to attach a class to a movieclip that was created by using the 'createEmptyMovieClip' method.
I'm having some issues getting a button to work from ctionScript.I created a movie clip and export it. Added it to stage and that displayed fine. I then added some text on the movie clip, converted it to a button and exported it... but then hit a wall. The button is in the library, but it doesn't like the ' import fl.controls.Button;'
Here's the code:
package{ import flash.display.*; import flash.events.*; import fl.controls.Button; public class coffeeAS extends
[code]......
here what i wanted to say i have created sq_thumb movie clip. then i linkage sq_thumb with class name "thumb". then i double click sq_thumb in the library to go to inside sq_thumb timeline. then i write following code
[Code]...
So I have a movieclip that I am dynamically adding to the stage when a user clicks a particular button. There are multiple button that each result in the movieclip getting attached to the staged and scaled to a different particular size. Instead of attaching a new instance of the movieclip every time a button is clicked, I only want to attach a new movieclip the first time one of the buttons are clicked and then scale the dynamically added movie to the size specified in the functions for all of the subsequent button clicks. To be clear, I want to attach the movieclip on the first click and then scale it for all of the subsequent clicks.
Here is the code I am using for the buttons:
ActionScript Code:
stop();
videosBTN.onRelease= function() {
[Code]....
Is there any way to dynamically name a varaiable or created movie clip? I know that I could make an array of movie clips, but what I really want to do is make a new movie clipe name based on another name. The reason I want to do so is that I want to pass a movie clip to a function and have it make a new movie clip (to contain the first) with a slight variation of the test such as "frame" or "handle" which I can then use to center the source movie clip.
View 1 RepliesI am having trouble targeting a movie clip that was dynamically generated from information in an XML document. Basically, what I want to do is be able to manipulate the movie clip after it was generated by the initial function. Unfortunately, I can't figure out how to properly target the clip even though I am pretty sure I have the proper title and location (tried both _root. and _level0.).[URL]the string at the bottom - "_level0.mc_image2" - is the name of the last movie clip (with an image inside) to the right.
View 1 RepliesI have got a movie clip that is dynamically created with actionscript I then load an external swf into that movieclip. My problem is having it centered when I view it in my browser..How do place I center that dynamic created movie clip? I was trying this but it's not seeming to work.
Code:
var container:MovieClip = this.createEmptyMovieClip("container_mc", 0);
container._x =Stage.width/2;
container._y =Stage.height/2;
i'm creating a menu where i place movieclips dynamiclly:
for each (var button:XML in XMLgothrough) {
//Create a new menu item
var menuItem:MenuItem=new MenuItem ;[code]....
but i keep getting a ReferenceError: Error #1065: Variable menuItem1 is not defined.at MethodInfo-359()error.
I created a movie clip [code]...
How can I animate this (slide to x position), since there is nothing in timeline ?
I am trying to add action script 2.0 to a slider that i created using http://www.kirupa.com/developer/mx/slider.htm that slides a movie clip that is a timeline from left to right. In the timeline are (i)More... buttons that will reveal more information. I just need to know how to integrate the timeline into the code using as2 to make it slide when the slider is dragged..
This is the action script that I have on the slider movie clip as stated in the above tutorial. But this is ALL the action script I have on EVERYTHING..... I know I need more to make it pan the timeline but I dont know how to do it.
[Code]...
I really could just use a good tutorial that shows me how to link the image that im sliding to the slider bar. When the slider is moved to the right... the image flows left.... toward the end of the timeline. When the slider is all the way right. The end of the timeline is shown. The timeline is bigger than the stage so the slider is on a line with years on it.
I am having trouble targeting a movie clip that was dynamically generated from information in an XML document. Basically, what I want to do is be able to manipulate the movie clip after it was generated by the initial function. Unfortunately, I can't figure out how to properly target the clip even though I am pretty sure I have the proper title and location (tried both _root. and _level0.).
I've put the files I am working with online for reference:[URL]
If you load the swf [URL] ) the string at the bottom - "_level0.mc_image2" - is the name of the last movie clip (with an image inside) to the right.
Also, if you look at the code, you'll see this is a modification of the portfolio from: [URL]
I am an AS3 n00b with hopefuly a simple question I am designing a simple game in flash. This code creates an array of movie clips and asigns a picture to each one. It is a map screen. What I need is when I click on one of the created movie clips, I need it to return either the index of the clip in the array or the name of the clip. Basicaly anything I can use to tell them apart in the code. Here is the code:
[Code]...
Now all this works fine, it creates the map and assigns the correct picture and places them in the correct X,Y position and it is the correct grid of 27x27 squares. The problem is with the name, when I click on the movie clip, it returns "Instance2" or "Instance5" or whatever. It starts with 2 and then increases each number by 3 for each clip, so the first one is 2, then 5 then 8 and so on. This is no good. I need it to return the name that I assigned it. If I put the code in trace(MapSquare[1]) it will return the name "MapSquare1" so I know the name was assigned, but it isnt returning.
I have added a listener function for mouse event
bar.addEventListener(MouseEvent.MOUSE_OVER,mouse_over_bar);
And defined the function
public function mouse_over_bar(ev:MouseEvent):void{
var hover:MovieClip=new Hvr();
var tween:Tween;
[Code]....
How i remove this child movieclip hover? I would like to remove the chil when i am roll out from the bar.
I just tried to use a sprite mask another movie clip .But it doesn't workis there any way to try thishere is my code
ActionScript Code:
sp = new Sprite();
addChild(sp);
[code]....
Is it possible to attach some script to a dynamically created movie Clip?
View 7 Repliesapply actions to an attached/created movie clip at runtime? I.E. You use attachMovieClip to attach a clip, and then you add a startDrag/stopDrag system to it dynamically.
View 3 RepliesI have a looped sound and some components in my main movie (scroll bar) which for some reason is really bogging down my swf and causing the preloader bar not to show up until like 46% or something ridiculous.
So I am trying to solve the problem by having a preloader swf as suggested by Kode in this thread. However, now all my targeting is messed up in my main movie. Everything that was _root has to change but I can't tell what to load it into. I tried using _parent, _parent._parent, _root.container_mc (which is a blank movie clip created in the preloader swf that main is loaded into after the preloader is 100%) and others but nothing works. Even the simple looped sound which was originally just _root.backsound.start(0,999) can't be targeted. how to target things on my main stage based on the preloader swf?
Does anyone know a way to apply actions to an attached/created movie clip at runtime? I.E. You use attachMovieClip to attach a clip, and then you add a startDrag/stopDrag system to it dynamically. Is it possible?
View 3 RepliesCan a created "createEmptyMovieClip" movieclip have a rollOver state
[Code]....
Is this supposed to be like this? Orrr am I missing something?