I want the navigation_mc to be in a specific place. How can i do that with actionscript? How can i place the mc? This is the code i used so far.
this.createEmptyMovieClip("navigation_mc", 10);
loadMovie("navigation.swf", navigation_mc);
I have navigation_mc which holds navBkgd_mc and nav1_mc, nav2_mc etc.
my problem is when this happens:
navigation_mc.onRollover = function(){
this.gotoAndPlay("in");
}
I don't have access to navigation_mc.nav1_mc or navigation_mc.nav2 etc.and.. I also want this to happen.
navigation_mc.onRollOff = function(){
this.gotoAndPlay("out");
}
How to make this smoke effect work without mouse input. I am trying to have it spill from the end of a cannon, & my attempts to modify the position have resulted in all my bitmaps shifting. I changed this
doTrail(_root, _xmouse, _ymouse, currentBitmap);
To this
doTrail(_root, _x=80, _y=100, currentBitmap);
[Code] .....
I've used .x = and .y = with the position I want and the pane continues to show up in the top left corner instead. What am I doing wrong?
View 2 RepliesI've come accross loadMovieNum and loadMovie, I can use them to have the swf load up in to the top left hand corner but I can't seem to find out how to script it to the area I want it to load to.
View 3 RepliesHow do I have a file that's created via actionscript save the file in some other location other than the default, really long appdata/roaming/Macromedia/etc./etc. directory? I'm using the SharedObject.getLocal syntax, but is there another syntax I need to use so that I can save the file in a directory called appdata/roaming/MyApplicationName ?
View 1 RepliesI am currently working on a platformer, and I have a bunch of different tiles I use to form my maps with. These tiles are very different in the looks, and placed besides eachother, they give a very sharp change, which is not very visually appealing. I've been trying to fix this in the following way:
I have four layers, two for each block I'm fading. The first layer is where the actual tile, the graphic, is located. The second layer is the mask. In the mask layer, I have a gradient, which is the exact opposite of the other tiles mask layer (Mask layer 1 goes down, mask layer 2 goes up). However, I need to be able to alter those dynamically, place new gradients in the appropriate mask layer, and new tiles in the appropriate graphics layer.
I've been googling around for the last hour or so, attempting to find a way to define which layer a new MovieClip is placed on, but all I've found is setChildIndex, which, since one layer acts as a mask, I can't use. Is there any such function in Actionscript, or am I to make all combinations of tiles by hand?
I used below scripts for drawing on stage. but I want draw on specific place of stage not all of them.How can I define that zone ?
ActionScript Code:
this.createEmptyMovieClip("drawing_mc",this.getNextHighestDepth());
this.onMouseDown = function() {[code].....
How to make sure the sheep will only appear on the green field on the left hand side? I use the following but they appear all over the place.
onClipEvent(load) {
_x=Math.floor(Math.random()*379+150) //where width is the width of your stage
_y=Math.floor(Math.random()*376+150) //where height is the height of your stage
}
how can I insert/add/push new values to specific place in Array?
For Example:
Array:
myArray["value1", "value4", "value5"]
[Code].....
I know that the question may seem very easy. I am trying to display an image on canvas.I need to do it in AS, and also I need to locate image in specific coordinates.
View 2 RepliesI'm aware of the .click() method but the click must be on a prezi loaded (flash) so don't really have a html element to use.
What I have instead are the exactly coordinates of the place I want to simulate click on. Is there any way I can do that?
The click must activate a flash element. (A play button)
Note: There is a similar question around that have an answer witch require swf control. I don't have that so that method is not applicable.
One other quick question... what happens if I simulate a click on an element that has display: none. It click on the elements "under" it? (as a normal click would do; and yes I know this sounds funny but I don't know how to explain it otherwise). If yes I was thinking of making a position absolute div, put it on top of flash and use .click(). The problem is that i have a feeling that the click won't be applied on flash.
This is somehow a combination of javascript simulate mouse click on specific position and mouse click somewhere else on page (not on a specific div).
I want to have a centralized place where I put text and when you click on any one of the animated movies it displays the specific text.
View 1 Replieshow can I insert/add/push new values to specific place in Array?
For Example:
Array: myArray["value1", "value4", "value5"]
Data to insert: "value2", "value3"
So I need my array to look like this: myArray["value1", "value2", "value3", "value4", "value5"]
I have an object that moves around, and once it is pressed, I want it to move to a specific place and then continue to the next frame in the movie clip. This is what I have : a movie clip, the first frame has the stop(); command and contains approx 12 frames. The MC has this script attached to it :
onClipEvent(enterFrame){
if(_x >= 0){
_x = _x - 10
}if(_y >= 0){
_y = _y -10
}if(_x == 0 && _y == 0){
gotoAndPlay("/ball",2) // ball being the instance name of the mc
}}
The first two parts do move the object to where I want it but the third part will not work and I cant get it to move past frame 1. (Note : 0,0 is not the place I want it to move to, it is there because I was experimenting with the code and this was an easy place to assign to the movement).
There is any way, any cody or anything that can make an action or function take place when a sound reaches a specific second?? For example I have a sound file, when it reaches the 15 second, I want the _root.play(); action to be executed
View 1 RepliesThere is any way, any cody or anything that can make an action or function take place when a sound reaches a specific second??For exampleI have a sound file, when it reaches the 15 second, I want the _root.play(); action to be executed
View 1 RepliesI have 35 movie clips named mcMyObject1, mcMyObject2, etc. to mcMyObject35Each time the playhead enters the frame this code sits on, I want all of these 35 movie clips to be placed on the stage in random orderI want each one of these 35 movie clips to land on one of these X coordinates: 57, 187, 317, 447, 577, 707, 837 and on one of these Y coordinates: 53, 183, 131, 443, 573. (It's a 7 x 5 grid)Movie size is 1024 x 768Here's my code, which doesn't work:
stop();
var myXArray=[57, 187, 317, 447, 577, 707, 837]; //cordordinates for x
var myYArray=[53, 183, 313, 443, 573, 573, 573]; //cordordinates for y
[code]......
how can i duplicate a movie clip and then place it on a certain place on the stage
View 5 Replieshow can we place hundreds of instances of one movieclip on different place?
for exemple, pacman:
how should i code the placement of all the money?
i would go:
_root.attachMovie(
_root.attachMovie(
_root.attachMovie(
but that's not the good solution is it?
there must be a code to do that without hundreds of lines of code.
i tried it all but cant solve it on my own. i have 10 different MC,s. they shall appear by hitting a key on the keyboard. all i want them to appear and play on a random place.
all then 10 MC,s are deticated to 10 different keys on the keyboard. (so by hitting the "A" on the keyboard shall place and play MC "A" at a random place..
What I want is a hint how to make a specific thing happen while clicking a specific button. Like "if I click button 1, do this". Would like to use this script though I'm gonna add buttons over time and this is an easy way to have the functionality working.
Here's the code:
Attach Code
function hitButton(btn) {
btn.onRollOver = function() {
this.colorTo (0xC4006A);
[Code]....
i need to change the colour of a graphic in a specific movie in a specific frame. if i have a movie clip instance-named "sidetext" thats 15 frames long, and i want a graphic in the movie, called "letterp" to change to one of four colours that i want it to randomly at frame 10 and stay that colour uintil frame 15, how can i do this?
View 2 Replieshow I can loop a specific bit of my movie until a specific link is clicked?
View 5 Replieshow do i export specific frames not all frame. ex: if flash has 1 to 200 frames. here i want to export 51 to 150 frames as a movie. if there is any command or plugin to export movie like this.
View 0 Repliesso i need to make a flash that will do the next things.if user press button "x" on the next frame should display "x" text from a xml.if user press button "y" on the next frame should display "y" text from a xml.
View 1 RepliesI have been doing really well figuring everything out up until now.[code]How it stands, what is this link pointing to? Can I make it target a specific frame in a specific movie clip?And if someone would be so kind and explain what this is saying in 3rd grader terms.
View 3 Repliescutting to the chase, Basically im loading a movie externally using this code...
Code:
on (release) {
if (S_Init == Number(S_Init)) {
loadMovieNum("s_menu.swf", _root.S_Init);
[Code].....
I have a sliding menu, and need to loadMovies when specific clips are in specific positions. For gallery, for example, the code I'm using is:
if (xTargetSLI = 350){
loadMovie ("gallery.swf", 1);
}
But with that code, gallery.swf loads by itself, regardless of the position of SLI.
would like to be able to click on a specific image and set specific URL-address. Here is my code so far;
HTML Code:
function loadXML(loaded)
{[code]....