I am working on a slideshow where images are loaded from XML.Currently the slide show starts when all the images are loaded.
I want to preload one image at one time i.e when first image is loaded,first image should be displayed then preloader for next image is to be shown and after that next images is displayed and so on..
onLoadStart = function()
onLoadProgress = function()
onLoadComplete = function()
So I've been asked to make a website for the restoration company I work for. I'm all finished except for a "gallery" section where they want to showcase some of the houses and buildings they have worked on.Normally I would just find a simple tutorial on how to externally load images into Flash and make a quick slideshow with thumbnails.But the problem is, some of the photos have before and after shots. What I would like to do is have the before shot blend into the after shot back and forth. I have been able to do all of this no problem, but my filesize is way too big to just have one preloader for the whole file. So what I would like to do is have a preloader for each movieclip once I click the corresponding thumbnail.
View 3 RepliesIs it possible to preload content before a person looking at your site requests it, for instance when your website loads and is displayed other content and pages will start preloading in a certain order with out the website user knowing?
View 5 RepliesI have a main movie (e.g called main.swf) and a couple of other movies which need to be loaded inside my main movie.Some of these should load inside a movieclip, and some should load inside a scrollpane. Now, whatever I do, i just can't make my Preloader show the amount of loaded movies properly.I even used the built in methods of scrollpane but it doesn't work at all.I use AS2, and flash CS3.The loader stops at 0% and after same time it goes to 100%.
View 3 RepliesI'm trying to preload an image into a clip and then have it run an animation with the image after it's preloaded. This is the code that I'm using within the clip containing the image (FLA attached):
frame 1:
this.loadMovie("image1.jpg",1);
frame3:
if ( this.getBytesLoaded == this.getBytesTotal && this.getBytesTotal > 0 ) {
// If the movie has fully loaded then go to and play the image animation in the
[Code].....
Note: If the image preloaded correctly, it should fade out once it's loaded.
how to preload all the thumbnails and the first picture from an XML.
i figure it would be something like this place all thumbnails into a holder(thumbnail_mc) and getBytesTotal() and getBytesLoaded() then getBytesTotal() and getBytesLoaded() of the first picture which is in it's own holder(image_mc)add the getBytesTotal() together add the getBytesLoaded() together then create preloader from these
From my somewhat limited understanding of the AS, the next image is preloaded and waits until the button is clicked, and then swaps depths with the first image... I am trying to use this gallery, but have the image on top (one) fade out, so it would reveal the image below. But would it be easier to keep the swap the same, but alpha fade the second image from 0 to 100?
[Code]...
I'm making a flv movie with dynamically loaded cuepoints (from xml).On every cuepoint there should fade in an image (jpg) . The path to this image is sent with the cuepoints.To be sure an image is loaded before the cuepoint is passed, i've created a preloader that preloads 4 image from the xml before even starting the video.After the video is started the preloader preloads the remaining images in the background.All works well expect for 1 thing:Flash does not seem to cache my preloaded images. In the bandwidthprofiler i can see that when a cuepoint passes, flash loads the preloaded images again. why does flash reload the image while it is already preloaded?[code]
View 3 Replieswant to preload the embedded swf's as you would images using javascript or css. I have so far been unsuccessful. I am trying to avoid having the great big white patches in the site while the menu or stocklist(on the stocklist page) load, and id prefer not to have a loading bar while it does. If possible id like to have all images and swf's loaded and cached before the page is displayed so it appears seemingly instantly. Is this possible?I first attempted to do this with a standard image preloading javascript and failed. Is it at all possible to preload swf's with javascript, if not what are my options?
View 6 Replieshave a swf file calling an xml file w/ several images. I want the first image to load in the swf, then the additional images in the xml file to load invisibly in the cache while the viewer looks at the first image.he point is to create a seamless flow through a gallery, rather than having each iamge preload.
View 2 RepliesI am trying to preload images for an image gallery ina flash movie.
i have the images externally loaded so as not to bloat the swf but how do i start a preload for all the images when someone gets to the home/front page, so that by the time they get to the image gallery everything is loaded in memory so there's no delay?
I have a movie that calls other movie clips with a preload and fade for each external mc called. but after you call and load the swf in the container it disappears aftre about 30 seconds it disappears if you dont do anything and then it comes back after about 30 seconds. I am using this script for the preload object and fade.
onClipEvent(enterFrame){
if(dummy ==1){
_root.text._alpha += 10;
} loaded = _root.clip.getBytesLoaded();
total = _root.clip.getBytesTotal();
[Code] .....
Then this is on every frame to make it use the preload and fade in the new loaded swf after it shows it loading.
clip.loadMovie("GuardHouse.swf");
clip._alpha = 0;
now = 0;
text.dummy = 1;
//now load the external file into the myData object
myData.load("GuardHouse.txt");
stop();
Also I dont know if this has anything to do with this problem but when I load an external swf it does not show any actions i have in there or any text but does show images and shapes but not dynamic text boxes or fades or anything like that. You can view it at the url below. I have listed the link to the main movie swf and the map1.swf that it calls when you click on floor plan so you can see when you view the map1.swf by itself there is more stuff that does not show up when loaded into the main swf. [URL]
I have a gallery of 30 plus images. The user will then use a scroll bar to flip through them. The images actually make up a sequence so I dont want to preload each one one at a time. I am also pulling in the images dynamically. Below is a bit of the code I am using. What I would like to have is all of the images preload on one frame and then once that is done go to frame two where I have the rest of the code for gallery manipulation.
[Code]...
I'm trying to get a preload movie clip (progress_clip) to show up when an image is being pulled from the xml data bank and then shut the visiblity to false when the image is done loading. I have no idea what I'm doing wrong any bump in the right direction would be very cool.
Error message:
Quote: TypeError: Error #1009: Cannot access a property or method of a null object reference.at flashIndex6_fla::MainTimeline/frame1()
Code In questions:
ActionScript Code:
/* STICKING POINT PULL OUT THIS COMMENT TO SEE ERROR MSG AT EXPORT.[code]...........
[code]Whenever im preloading images, i get a NaN Error everytime. Sometimes all i see is a NaN error, not even load numbers like 89% or so. I got the swf online at url...If you go to any section in the designs menu (3d design, 2d design or webdesign) and click a image you get the script that gives the NaN.I only get NaN in Firefox, Internet Explorer just gives 0. But either way i would like to see percentages rather than 0 or NaN.
View 1 RepliesI have modified hga77's gallery and made some changes with the style. I am still having some problems and need three things sorted out. Well, two aren't essential but the first one is.1. Most importantly, On Load I need the first image in the XML file to load in and have a border.2. Get the percentage preloader working.
View 1 Repliesbasically i would like to dynamically display and preload an image onto my main movie clip. this image would be the first item in my xml file. on my main timeline i would like to have a few buttons that a user could click to change the default image on the page.
when they select a new image, i would like to have the preloader appear above the default image and then tween between the old and new image (one fading out and one in kinda thing).i sourced some code but i've been having problems preloading the first image. the image loads but the preloader doesn't do anything. it seems like the preloader doesn't seem to recognise that i'm trying to load an image. it thinks it's fully loaded and carries on before the load can begin!i would also like attach a different preloader for the first image displayed than the ones being loaded via the buttons.
how can i tell flash to pop a preloader after the user click the import image via link?
Code:
image_button.addEventListener (MouseEvent.MOUSE_DOWN, load_image);
// load image
[code].....
Have set up a file which preloads all of my images from an XML before displaying. However I'm having problems, one is the preload bar flashes slightly at the start, then is visible as I scroll through each image in the galleries. I've attached my fla file >> here <<
View 12 RepliesI've a preload bar in my movieclip that i add on the stage for every thumb. With this code only the last preload bar does the preload...the others don't do anything...Here the code:
[Code]...
I am making a website (even tough i don't know much about editing and stuff yet) and i'm trying to use this Template.. there are tabs on the site with option etc, and i am having trouble editing 1 tab at a time .. everytime i change something in 1 tab, it automatically changes all the others as well .. i don't know why .. there is a green 'glowing' light green retangle around all the tabs.[code]...
View 5 RepliesI have created an Image component in flash which is having a "imageSource" paramter, where in a user can provide the path of his/her image(both from web or from harddisk). I want that image to be compiled with the swf. how can i do that?.
View 6 RepliesI cant seem to find a single thread on the internet on "howto enlarge/scale an image when selected".Please could someone direct me to a thread/link or some actionscript that could help?
View 5 RepliesI have an set of images (all icons) which I want to be able to change during run-time. I already imported all of them into my FLA into the library and already instanced one of them as a MovieClip (right click -> convert to MovieClip).
How to change the image associated with my movieclip instance in code, so I can change the image to any other of the images that were imported into the FLA's library?
I have implemented an image scroller. Now the client had reported that a few seconds are taking to load images. We have a local server. When we load images from it, it's not taking that much time to load images.You just copy the following code in a notepad save it as .html extension, which is the widget taken from client site.
[Code]...
If I have a button on my screen that I want to make a box appear when clicked, how would I go about doing that? It also needs to disappear after 10 seconds. I am not sure if this is an issue, but it needs to appear on the screen while everything else is happening underneath it. So the rest of the animation must continue on as this appears above it.
View 7 RepliesEvery time I try paste an image from anywhere in the flash file (all scenes) it crashes. I also cannot export to .swf.I tried saving the file with different names in different locations and did not work.I also have no corrupt font (tried looking for them after I read it in a forum)I really need a solution or find where the problem is to be able to continue what ive been working on.
View 2 RepliesI have learned from a video tutorial (Flash CS5 in the Family 23: Banner Ad Part 1)to use the F5 key to set the length of a time line of a particular image.When using the F5 key on the MAC keyboard, it will only allow for the audio to be worked with.I've tried Apple+F5, Option+F5, Ctrl+F5 etc.What am I missing?
View 1 RepliesI am looking for the script to save image or pdf from swf in real-time.
View 0 RepliesI have a problem with reseting time of displaying a picture when user click button to next/previous picture.
ActionScript Code:
stop();
time = setInterval(nextpicture, 7000);
[code].....