i have a question.
mc instance name: box
when i apply this code to a movieclip
onClipEvent(load){
this.alpha = 0;
}
it works.but when this code applies
box.onEnterFrame = function(){
box._alpha = 0;
};
it wont work. i dont want to code on the main symbols, i want to put all the code in frames.
In my application i write the code in three frames. First frame - call the second frame using gotoAndStop(2)
similarly Second frame - call the third frame using gotoAndStop(3) and Third frame - call itself using gotoAndStop(3) but it is not working .
[Code]...
I have a button that I want to work on multiple frames. Currently, I have a scene that automatically starts to play when the playhead enters the first frame (no stop command). I have an event listener in the first frame that listens for a click. After the click the user is supposed to go to another scene.
The problem is that the button is not working. I am assuming that the code in the first frame only applies to the first frame and I need to add additional code that applies as the playhead is playing across the multiple frames.
[Code]....
On the stage, I have a movie clip called mc which contains 20 frames.I have put mc.stop(); on frame1 of the main timeline, this puts a stop action in frame1 of mc.Now I want to put a stop(); action on frame10 of mc using the main time line where all my code is.
The code fl.getDocumentDOM().getTimeline().layers[0].frames[0].actionScript = 'stop();'; does seem to work and I don't know what to import.There also a code method addFrameScript(0, customFunction); but it only crashes flash player.
Is it possible to set up a frame number by the code, rather than doing so in the timeline? This usually is tedious, if you keep adding and removing frames till you get the desired effect.
View 1 Repliescan i remove code all frames one click
View 2 RepliesIn my project i need a code wich allow me to play an animation (not a motion tween)it is a self hand made animation frames by frames.my animation start from frame 10 and finish in frame 15.I just need to play it from 10 to 15 in Loop when my mouse is over.and stop animation loop when my mouse is out.
View 3 RepliesI would like to hear from experienced AS3 users: are there any kind of rules or 'good behavior' on where to place a code for files. Should one use *.as files instead of frames to place code? I mean, yes *.as file is pretty easy to track and modify. But there are a lot of stuff that could be done using frames.
View 5 RepliesI have a movieclip in which I show pictures. Each picture was 1 frame long, so my button (mc) to go ahead to the next picture had the following script:
this.onRelease = function(){
_parent.nextFrame();
}
Now I've changed the timeline so that each picture is 24 frames long. By reading some posts I've found this code:
gotoAndStop(_currentframe+5);
Still I don't manage to go ahead 24 frames. Does anyone know how I can change the first code to go ahead 24 frames, or even better, to the next keyframe?
This seems a very basic question, but googled for long time... I have a movie clip, at Frame 3 there is only one line of code: stop(); My question is: how can I add it through AS? The instance name is my_mc, more specific, how to refer to the Frame 3 of my_mc?
Another question is the same. The movie clip has two frames, frame 1 is blank, at frame 2 there is a button. After attachMovie, get my_mc, trace my_mc, it is there, trace my_mc.my_button, it says undefined. How can I refer to my_button at frame 2? Then I can define onRollOver function for it.
I have a little problem in my game. I have a var coins:int = 0; on frame one, and I want to access it from frame 2. I'm not using a document class. Is it possible to make some kind of a global variable like in as2 without having to put all my code from the main timelime to a document class?
View 1 RepliesI want to create a preloader that plays a certain amount of frames as it loads the rest of the frames. So, I have labels on the frames basically and need a preloader to play the "loading" frames as it is loading the "content" frames. Does that make sense? I have no idea how to even start this one... p.s. I am using AS 2.0, but if it can be done in 3.0 easier, I can switch over its no biggie
View 4 Repliesthere seems to be no accepted method of playing multiple flv using buttons. My latest attempt has me putting multiple instances of the flvPlayback component in different frames and using buttons to navigate to those frames. It works but nothing anyone has posted anywhere will result in removing the flv when you go to a different frame and instance. This was simple in AS2. Load movie to a traget and each time you load a new movie the other one goes away. REALLY goes away.
View 7 Repliesbasically im making a quiz on my main timeline ive got my questions and answers and on the last frame i want it to say how many answers the user got right. ive made a movie clip on this last frame. in the movie clip ive got 11 frames with the posible totals so frame one would be 0/10 frame 2 would be 1/10 etc what i want to do is when the user clicks the correct answer on the other frames i want flash to make the frames within the movie clip to go 1 step forward.
View 2 RepliesI have a function that counts days and some other variables and displays the values via dynamic text.
[Code]...
I have to place the incrementCount(): function every 12 frames so that it increments the values. Seems like it would be easier to simply modify the script to count "every 12 frames" but I can't find anything that tells me how to "count frames" in flash. Seems to be this is probably basic but I've searched unsuccessfully....so how do you do this. How do I get my script to work so it's frame based so I don't have to put incrementCount() every 12 frames?
Is it possible to have an movieclip of about 50 frames and navigate between these 50 frames? As if u put a marker on frame 10 and one at frame 30 and if u use a button it plays to frame 10 and stops and use another button to go from frame 10 to frame 30 and stop... and reverse if u use the earlier button.
View 5 RepliesI want to preload all of the voiceover swf files before a lesson starts so that they are instantly available when each frame / page that incorporates a voiceover is first visited.
View 4 RepliesAs stupid as my question might sound, i have spent the last 2 weeks reading oop books; but could use some guidance. I have a flash project that is basically a supped up slide show. On the stage i have the following: main_mc (instance name = images_mc) = movieclip which holds "pictures" ui1 (instance name = ui1_mc) = user interface that allows user to draw on picture (when drawing is enabled) ui2 (instance name = ui2_mc) = activates invisible hit areas (buttons) on select pics, when hit area is clicked, we jump to another pic in the main_mc.
I accomplished all of this on the timeline, but am updating the code to OOP. I am having A HELL OF A TIME trying to figure out how to store references to the instances (images_mc etc..), so i can control them from varying class files. I have found it is easy to control the instances from the documentclass, but not from unrelated class files. Example: images_mc.stop(); works in document class; but ovieclip(Parent).images_mc.stop() doesn't seem to work from any class file.(ui2 class file for example);
[Code]...
here's a part of my code:
player_mc.onEnterFrame = function() {
if (enemy0.hitTest(this)) {
enemy0.speed = 0;
} else {
[code]...
Note the red code, I need to repeat this an unknown amount yet multiple times but with the number on the end of enemy incremented by 1 each time. It starts with 0 as you can see the code just above the red. I heard about for loops using 'i' but im unsure about how to use it.
edit: ah, this forum isnt letting me highlight red. Everything in this editor is also failing. well, when I say code in red i mean this code:
if (enemy1.hitTest(this)) {
enemy1.speed = 0;
} else {
enemy1.speed = 1;
}
I'm looking for a way to have my main timeline code interact with code inside of a symbol.I'm tying to get my timeline inside the symbol to gotoAndPlay(10) when something happens in my main timeline code.
View 3 RepliesI'm looking for a workaround to the "AdSense does not let you choose only images but no flash" issue. I'm rather a newbie to JS, but is there any way for one script to prevent other scripts embedded in a site from detecting the presence of the flash plugin? Even if it doesn't work with AdSense, it would be nice to know if there's a hack to do this that might work in other settings.By the way, I suppose I wouldn't care if it failed to work on IE or obsolete browser versions.
View 1 RepliesI have attached a simple test fla.I am trying to centralize my code in all my movies using dot notation instead of spreading my code all over the place. It never works, I must be doing something wrong.The test .fla has a movieclip with a timeline animation. I used the linkage identifier to name it 'reload' AND named the instance 'reload'.
_root.reload.onRollOver = function() {
this.gotoAndPlay(2);
}
The pointer doesnt even change to a hand.
Got to the point where the hole in my AS3 knowledge is getting large!Realising I have confusion about the relationship of:Body of code on first frame of AS3 file.(Which I have so far used to create instances of library objects using addchild and make calls to class code).Is this code called the document code? What do people call it?Numerous classes linked together by extending each other etc.Library objects (usually graphical objects)Should it be done differently? have the following problems due to lack of understanding:Addchild complicated from a class but straight forward in main body code.Cant call functions on the main body code from classes, because class code does not know the main body code exists?
View 1 RepliesI have 2 tables,a main table with a field code as primary key, and other table detail, named p.e. DetailTable, with 3 fiels as primary key.What I want to do, it's a delete a row in MainTable, all the rows in DetailTable,where field code is the same as field code in MainTable should be deleted too.Here is the SQL to create the tables.
var sql2:String = "CREATE TABLE IF NOT EXISTS MainTable [code]....
when tables are created, insert data. I connect without problems, delete a row in MainTable (see the code), for example delete row with code=4, but in the DetailTable, all the rows with code=4 are NOT deleted Why?
[CODE]// Inside a class
private var conn:SQLConnection;
public function constructorClass(){conn = new SQLConnection();ConexionBD();}[code]...
I've literally been staring at this for 7 hours. I'm missing something.I have two movie clips on the stage. The instance name of the first is puzzleAK. The instance name of the second is pieceAK.The first is linked to a custom class called GeoPuzzle. The second is linked to a custom class called GeoPiece.The code compiles but throws an error (as explained).The code in the main timeline:
puzzleAK.fullName = "Alaska";puzzleAK.abbrev = "AK";puzzleAK.isLocked = false;trace ("made it through puzzle definitions: " + puzzleAK.fullName + " " + puzzleAK.abbrev + " " + puzzleAK.isLocked);
[code].....
Is there a way to make code on the timeline and code in a separate AS file communicate with each other?I have two buttons, a yes button and a no button.I have a confirm box which is a movie clip. In the movie clip I have the two buttons on it and code so that every time one of the buttons is clicked it runs a function.I have the rest of my code for the movie (so the code to make the confirm box appear) on a separate AS file.Is there a way I can define the functions on the movie clip and run the functions with the separate AS file?
View 7 RepliesWhat library/API or even a program for converting flash code into html 5 code automatically do you recommend me?
View 2 Repliesconverting the following code (i got from some site, i can't remember which) to on-frame code:
Code:
onClipEvent (enterFrame) {
with (_root.player) {
// Controls Player Speed
[Code].....
Basically its a movement and hittest script for a maze. It works great but I need it running within an onEnterFrame in the frame code.
Currently the code is on a clip which contains the clip "walls". and player is on the _root timeline.
I had a 2 frame setup with some actionscript for each frame. Tried to move it all into one class file and a
1. frame .fla. ; Hiding and showing the resp. moviclips when i virtually move from frame 1 to frame
2. Now I get these ...Error #1069: Property edit_panel_mc not found on flash.display and there is no default value. errors or..
when i thought beeing clever adding the stage. prefix ReferenceError: Error #1069: Property edit_panel_mc not found on flash.display.Stage and there is no default value. The mc's are on the stage... i have a single .as classfile. Why cant I reference them? or how should i do it/ what should i do to change it from beeing .fla script to class script.
I'm working on an app for iOS where I want to load content dynamically from the library that contains text and graphics inside different MovieClip's.However, I have a problem, the code I have is for bitmap!How can I change it so it works for MovieClip instead?I want to use the MovieClip instead of bitmap?Also want to use the MovieClip class instead of Sprite class?[code]
View 5 Replies