There is this random image that appears everytime your mouse rollover. If you guys noticed, when it rollover to rollout, the animation seems to control by the x y position of the mouse. It seems logical to be done in animation but not by actionscripting. Would love to get some tips on using actionscripting(randomness) or whatever to do this
View 2 RepliesI am just learning Flash and ActionScript and I am having a tough time with AS syntax. I am trying to create a rollover navigation effect similar to that of Gnomon School.
View 1 RepliesI'm in the middle of redesigning my portfolio site and I'm running into an issue in Flash. I have added a sound to the rollover of a movieclip button and it works fine as I navigate forward through the site, but when I jump backwards the sound starts repeating and it multiplies by the number of times I go back. I have put the sound in using the properties palette and am wondering if there is a simple way to add some AS3 code to the rollover function. I'm sure it is a simple fix, but I'm no AS3 master by any stretch. Below is my current button code. Can I just add code to the 'onRollOverHandler' function?
[Code]....
how the rollover animation on the top navigation buttons was made on this site --> [URL].
View 2 RepliesI've created a rotating navigation menu with 4 parts/submenus. To make the rotation/spinning graphics look smoother On rollover of one of the submenu/movieclip (the rotation will stop and continue on rollout), it should hide/decrease the alpha of other submenus, so a rollover effect could be seen. I've already tried with this:
Code:
_parent.MCInstanceName._alpha = 30;
But when on mouse rollout, the hovered submenu/movieclip does not continue to rotate.
I'm trying to set-up a simple random navigation using labels and an array that jumps to different points in the timeline. I've used a simple onpress handler to initiate. As far as I can figure this should work, however I only ever get one random selection. If I press the button again the playback head does not jump to a new random location. What am I missing here that is obvious?
[Code]...
I don't think I'm as familiar with arrays as I need to be to complete the following project - I've read about 60 posts and no one seems to be doing exactly what I am. Here's what I need to do: From a main swf (home.swf), I need to load 7 consecutive swfs in random order, (movie01.swf, movie02.swf, etc) from an array, into level 1. I need all seven to play without repeating, then repeat them in the same order in a loop.
But I ALSO need the user to be able to navigate through the swfs by using next or previous buttons (or by selecting individually 1-7, but that may be asking too much from my limited knowledge).Here is the code I'm using to generate a random ordered array:
var fileNames :Array=new Array("movie01.swf","movie02.swf","movie03.swf");shuffle = function (targetArray) {for (i=0; i<targetArray.length; i++) {var tmp = targetArray[i];var randomNum = random(targetArray.length);targetArray[i] = targetArray[randomNum];targetArray[randomNum] = tmp;}};shuffle(fileNames )trace(fileNames )
I assume from here I can load the swfs from fileNames [0]. I'm way out of my depth so the rest is a mystery to me.
how would i create an effect as seen here: [URL] when you hover over the navigation text...
View 8 RepliesIs it possible to introduce a fade into this script so that on rollover the new random color fades in rather than instantly switches.
on (rollOver) {
// "square" is the object being tinted
myColor = Math.round( Math.random()*0xFFFFFF );
myColoredObject = new Color (_root.square);
myColoredObject.setRGB(myColor);
}
Have attached the .fla
i'm trying to create some buttons as MCs that will load random imageMCs on release or rollover i think i am supposed to use math random in some form with MCs but i have no idea how to execute the script for that
View 1 RepliesThe script for my timer worked for one button but as soon as I set up the other 2 buttons to do the same, I started having a problem where the rollover action would go after the set amount of time was up but then would repeat itself once after the set amount of time was up again. just to clarify, if it needs it, the reason I don't have a rollout attached to these buttons is because I want the menu to stay out until you leave the menu area
so I have an invisible button called menuin_btn which sits to the right of the menu and covers the rest of the stage where the content will be, so you have to rollover that area for the menu to roll back in. The "rollin" in my code brings the movie clip to frame 16 (the end) where I have a gotoAndStop(1); command to get it back to frame 1 so the rollover can be used again. I've attached a zip with my current flash file and swf and here is what my current script looks like on the main scene:
[Code]...
I am making a ball move from left to right and back. but when I rollover twice quickly, it also accepts the second rollover command. I would like it to accept that second rollover only when the first one is finished. I mean, I want the first to be finished before it accepts another rollover.I know it is simple to solve this with a tween using frames instead of as, but I was wondering if someone knows how to adapt the script.
on(rollOver){
ballTween = new mx.transitions.Tween(balMC, "_x", mx.transitions.easing.Regular.easeOut,balMC._x, 44, .5, true);
ballTween.onMotionFinished = function() {
ballTweenterug = new mx.transitions.Tween(balMC, "_x", mx.transitions.easing.Regular.easeOut, 44,11.9, .5, true);
I'm using actionscript 1.0 and 2.0 on flash Pro 8 and keep getting an error when I test the movie. Here is the error:
[Code]...
I've tried to create this rollover navigation...starting over 6 times already. Is there different language / coding for 1.0 and 2.0? I don't understand what I'm doing wrong.
i wnat to show the message "Hi how are u" as a rollover message or a tooltip when i rollover the hyperlink Know More
View 1 RepliesI'm trying to create a rollover for a movie clip. On rollover, a line underlines the text,and when it rolls out, the underline reverses. This works fine the first time. The next time you rollover, the animation doesn't work. Then when you move the mouse off the button, a line appears under the text and doesn't go away. Here's my code on the invisible button.
on(rollOver){
this.gotoAndPlay("animIn");
}
[code].....
The animation/rollover works well but it still abruptly stops when I rollover another button. The link below is an example on what I want to accomplish.
View 1 RepliesI have a button set up, that when you rollover the button, it changes into another picture and stops, and also when it's rolled over, a large picture appears under the rollover.But when I first rollover the button, it acts like it's told to go to the out state. When I rollover it again it works fine.URl...there is my code to go into the movieclip and play the button
View 1 RepliesHow do I do a onRollOver detect without using the onRollOver function?I have a movieclip and when it's rolled over I have it zooming using the AS2 tween function.In that movieclip there's a form with fields, and if I use the onRollOver function on the movieclip to zoom, the whole movieclip becomes a button thus preventing any input into the form fields. Is there an alternative I can use?
View 6 RepliesOkay, now things are getting a little complicated. I need to build a Flash object that can sit over the corner of an image to serve extra content. It's way beyond my Flash skill level, my work is usually limited to print work in Photoshop and Illustrator so please excuse me if any of the following isn't clear. I am trying to learn though, So this is how it's all supposed to work, along with my issues; When the image & Flash item load a small looping animation will play to draw the eye/show the item as interactive.
When the user rolls over this the corner will peelback. I have a working peelback animation for the rollover, that reacts to mouse over/mouse off, and a looping animation for the initial, but I cannot work out how to make the initial loop until mouseover, then play the peelback when the mouse is over. And go back to the initial animation loop if the user rolls off. (Each of these animations is stored as a movie clip in the Library)
Then it gets more complicated... if the user stays on the corner until it is fully peeled back I need to make a small countdown (sort of a 3, 2, 1 situation) show, before launching a lightbox (would this have to be jQuery, or could it be done in Flash?) in the browser to serve the content.
[Code]...
I'm currently working on a flashsite and are trying to figure out rollover menu buttons. The site has 6 menu buttons and are placed next to each other. I want to put a rollover action on the buttons, that when you rollover a button that the whole button image enlarges and moves in front of the other.
View 1 RepliesIs it putting the first random var and then the second, like this?
frases.push(myXML.pais.frase1[ps][r]);
Basically what I'm trying to do is build an interface out of a fan of cards. I've got the the whole fan as a movieclip and then individual movieclips of the cards inside that have rollover animations.My issue is the rollover works on the cards arranged behind the cards that have the cursor over, which I don't want to happen.e.g see attachment.here's the rollover actionscript i've got on each card:
onClipEvent (enterFrame) {
if (this.hitTest(_root._xmouse, _root._ymouse, true)) {
this.nextFrame();
[code].....
I am trying to figure out how to make a bottom bar similar to the one seen ontions inside the bar- here's what I've got so far:as you can see I have a date/time MC inside the bar_mc which is working fine but whenever I try to have a new rollover/rollout movieclip (or button) inside the bar_mc it won't work/won't show rollover animation.
View 1 RepliesI want to rollover a button and have it trigger the rollover state of another button. The buttons overlap. The one on top is transparent and smaller than the bottom button. So far I think I have the AS3 to handle the rollover of the top button, but I don't know how to trigger the other button's rollover state.
[Code]....
I want a movieclip consisting of a dynamic text box that, from the time it's loaded onto the stage, loads a randomly selected text string from an array, and continues to loop until the clip is removed from the stage. I also want the text strings to appear in the text box for random intervals between 500 and 3000 milliseconds.
While I've found tutorials here and elsewhere on loading one element from an array, usually triggered by a button, I don't know how to combine/alter it with the other elements.So I want this movieclip on the stage randomly flashing phrases from an array, some for a barely perceptible time, and others for a readable time.
why is this code NOT loading a random image, despite tracing random number?
package {
import flash.display.Loader;
import flash.display.Sprite;
import flash.events.*;
import flash.net.URLRequest;
import flash.display.MovieClip;
[Code]...
What I want is for my mc to slide to a new random x position when it is less than 5 pixels away from its target, it keeps doing this. the problem is for some bloody &*�$(()** reason my random numbers only keep going up!! why is this?? i want to produce random numbers between 1 and 770 - this is my code..
[Code]...
I've been putting data into an array via XML, and then selecting at random an image string to load in a pic at random. But whilst doing this, I wanted to remove the String from the Array that I have just used, so I don't get repetition of the same image in the output. I initially thought that pop would remove the string I had just used - But of course it Removes the last value in the Array instead, which doesn't really help.
Ok - so how about randomizing the data once inside the Array, after it has been pulled in from XML!? That way I can load in the 'last' image, and then pop it out! Keeping a randomized selection of images each time 'it' is loaded
1) what value is seeded to Math.random() to generate the random number?
View 2 RepliesA background music looping in the back, that starts with the opening of the swf and never stops. I think I achieved that with this bit of code :import flash.media.Sound;
import flash.net.URLRequest;
import flash.media.SoundChannel;
bg music[code].....
Finally I need to jump from frame to frame randomly to play various animations. For example :Project starts, background music starts playing, we hear random sounds played one after the other, while some animations can be seen on screen, playing in a random order.