I got a flash magnifying glass and i can change the settings a bit, but not much. I would like to get rid of the bouncing effect, but if i reduce bounce effect, the magnifier gets very slow.
ActionScript Code:
In short how to get rid of the bouncing effect?
Is there a way to manipulate or regulate the behaviour of the bounce (tween) effect? Amount and how often it bounces?
View 0 RepliesI'm trying to make my own component that behaves like a list and supports infinite scrolling (in 1-dimension : vertical or horizontal) - both directions. For eg, a vertically laid out list which the user can scroll up or down forever - without ever hitting the 'last' or 'first' item. A good use for this: a calendar that displays each month as a list item.
Anyway, there are a bunch of things to overcome. The first of which, I think, is to disable the scrollbar's bounce effects (introduced in the latest Flex 4.5 (mobile) SDK). If I can disable the bounce effects, I'm guessing I can then add/remove items as needed to the list and it would scroll infinitely.
[Code]...
if i wanted to add a little bounce effect that when scrolled it went a hair past the destination but came back how would that look?
how to do the text effect where the lines tween together one by one (the spaces reduce), check [URL]
View 1 RepliesHow do I make a onion skin effect in my movie so it looks kind of like slowmotion.
View 2 RepliesFollowing some tutorials, I coded for a thumbnail scroll panel that works just fine. The thumbnails are scrolling when the mouse if hovering the panel and stops scrolling when the mouse leaves the panel.
However, I'd like to create a slow down effect on the thumbnail scroll panel when the mouse cursor leaves the scroll panel (instead of immediately stop scrolling).
I have a simple ball class where it bounces and such and stays on the stage based on boundaries. right now im using a for loop to attachMovie("ball",...) in my main fla file
which is basiclaly my movieclip that has the AS 2.0 class pointed to it. It bounces fine using the tutorial on Kirupa(by senocular?) i want these balls to bounce off each other too?
I would like to know how to "bounce" a movieclip. Not sure if that is the right term for what I'd like to do.URL...When you click a button the background images kind of bounce into place.I know how to control a MC but how would you make that bouncing effect?
View 3 RepliesI have this code in a button. I want more exaggerated easing, but more importantly, a "bounce." What I mean by this is on rollout, the button seems kinda sticky and jiggles back and forth a little.
code:
onClipEvent (enterFrame) {
if (_root._ymouse > 50 && _root._ymouse < 150) {
_root.yChange = Math.round(_root._ymouse-this._y);[code].........
how can i reduce the swf size? it's 9MB and it takes a bit to load online. is there any solution to reduce its size so it can load faster? the pictures and loaded externally so they're not embeded in the file. There are some inside the movie but they were already reduced from their original size.
View 1 Repliesi decompiled a swf & convert it to fla .after geting swf ,again i decompiled it,results in increase in file size of fla.is there any way to reduce the file size of fla...as PC hangs when i save fla.
View 2 RepliesI have this code to make a ball bounce. it works fine, however, everything on the stage bounces. I only want the ball to bounce.
Here is my code
/* Actionscript 3.0 Bounce Effect. ball = movieclip instance name*/
var velocity = 0;
var gravity = 2;
var speed = 0.03;
var ground = 300;
Object(this).ball.addEventListener(Event.ENTER_FRAME, fl_bounce);
function fl_bounce(event:Event) {
[Code] .....
I'm trying to make two balls that bounce into eachother and walls for a school assignment. My problem is I don't really know the maths to make this work myself so I've tried to get help from others who don't know AS but who do know the maths, but I couldn't get that to work. Then I found a site that had exactly what I was looking for, but it was in AS2. I've tried to translate it to AS3 but it doesn't work properly either. The balls either get connected to eachother and stay that way or go out of the stage. This example is here:[URL] Attached my files. Probably lots of redundant code in my code from previous attempts at solving it, but I don't think it affects anything as it is now.
View 2 RepliesI'm pretty new to Flash and I've ran into a bit of an issue. I'm trying to convert a AS2.0 code into a AS3.0 code, more specifically I'm following this guide:
[Code]...
I need help with one of my Flash projects,I'm trying to use gskinners shape based collision detection, but for some reason I cant get it to work, but im pretty new to using classes, so I dont understand the structure too much. Can i get a tutorial on how to use the gskinner class? im using the as2 version.heres the code, bare with me, there's a lot here. in all codes, mc1 is the track outline MC, and mc2 is the car
basicly im making a 2D top down version of WipEout HD Fury, so file structure is something like this (the .fla is called wipeout as3 because i was initialy coding in as3 and never changed the filename).wipeout as3.fla (the flash file containing all the MCs and animations, but only enough coding to import all of the external code files, as well as the VCam and its script)
the code is;
Code: Select all #include RaceControl.as"
the RaceControl.as is used to determine the Car's control scheme, and refers to a physics code called RaceCar.as. i found it on the interwebs, all credit to matt carpenter;
Code: Select all// Race control
// Create key listener[code]........
the Bounce Function is my own work, and is what i want to happen when a collision is detected.now, the movieclip used for the car is my own drawn design, as is the track, and i want to use GSkinner's shape based collision to detect the collisions properly. so far i have the car driving around quite happily but i need it to collide with the walls of the track, rather than drive right through them.
I'm making a ball that are going to bounce realistic..But it doesn't!
View 4 RepliesI'm trying to make a ball to bounce on something realistic.How can I make it work? It's impossible.
View 3 RepliesOkay, so I have a movieclip of a letter (done in photshop to look like jelly). I want to animate it to fall from above, bounce on an invisiable plane, squash when it hits, and squash and go back up and decrease it each time until it comes a rest.I have the bounce but I need to squash.
Code
Code:
onClipEvent(load){
[code].....
"How do I get 2 circles to bounce off eachother correctly??". I am currently making an air hockey game. I have seen great physics explanations, and great swf's, but I can't seem to do it myself. I know how to get the puck to bounce off the walls, and that code is very stable/simple, but the hitter-against-puck collision is very elusive. Bit-101 has some great swf's on flashkit forums about the exact same thing I am looking for. I have heard of somebody on super samurai giving a great explanation. I have seen a physics student's explanation. It seems to be a lot of code involving the radii of the circles, and the only thing I really understand is this:
r1 = radius of puck | r2 = radius of hitter | d = distance between them
if r1+r2 > d, then they have collided.
Here is my puck-against-wall code:
onClipEvent (load) {
speed = 0;
dist = 0;
dx = 1;
dy = 1;
[Code] .....
So anyway, obviously that code is inside of the puck.
I have this following situation.Basically, I want my balls to move around a border and bounce off the walls when it hit the walls.
[code]...
I have used this code for getting a circle going from the top and down...
Now i want it to bounce back to the top but i don�t know how to integrate it to the code.
onClipEvent(load){
myscale=290;
}
onClipEvent(enterFrame)
[Code]....
If anyone will explain how the code works(cause i�m no good at this Action Script),- i will be glad.
I am just restarting my flash adventures and am trying to learn AS3. I can a real quick code request. I am trying to make a MC bounce off the sides of the stage. When I use the following code, the MC gets stuck going -2 then +2 at the edge of the stage.
[Code]....
How do I get it disregard the first part of the if/else and then go the other direction? know this is a really beginer question,
I can only get my character to bounce off of walls above him, and to the left of him! when going right or down, he just goes right through.. I tried a lot of combinations. Little push in the right direction please?
Code:
private function loop(e:Event) : void {
//if (goingLeft) this.animGus.gotoAndPlay(51);
[code].....
I'm running some AS3-based animation, a simple bounce effect. A ball lies above a line, gravity as acceleration increases it's negative velocity by 1 each frame. When it penetrates an arbitrary line it is move up accordingly and velocity is set to a high positive number (24).
At 40FPS, and with a high positive velocity set to the ball, the critical frame where it hits the "ground" doesn't always render (maybe four out of five times fails), yet tracing outputs that it did indeed go across the bounce areas. Here are the 4 critical positions where 456 would be where it was wrapped to the ground:
[Code]...
I am using Flash CS3. Now i did some image with mc(Movieclip) animation. Its come near 150kb. But i dont need this like file size. I want less then 75kb.also i did publish settings and reduce the jpeg quality near 40. But its come near 106kb...
how can i reduce this swf file size.
i have 8 movie clip and i use it as a navigation buttons and when clicked it should go to different links. i use these codes but i think these codes are not pure oop so reduce programming using oop but works in same way as it is doing right now.
the codes are follows
function buttonmode(link:MovieClip):void{
link.buttonMode = true;
}
buttonmode(rec1_mc);
buttonmode(rec2_mc);
[code]....
I have a Flash 8 a/s2 site but I feel the load time when a visitor visits the site is too long. The site does have music, pictures and videos but they are all loading externally.
Is there a way I can reduce the load time of the SWF?
I've uploaded an AIR-built .ipa file to Apple. From Apple: "The app binary listed below was 8 MB when you submitted it, but will be 20 MB once processed for the App Store"
So I'm trying to trim it. I've gotten rid of all unused .as classes and all unused assets. Does anyone have any clever way of reducing file size further? One way I thought of is this[code]...
My problem is... I import two sound files and give the linkage name snd1 and snd2. In the first key frame I add this
sound1 = new Sound();
sound2 = new Sound();
sound1.attachSound("snd1");
[code]....