ActionScript 2.0 :: SetRGB On Symbol In Animation Causes Stop?
Apr 25, 2006
See, I have a Symbol- in's an animation of a "Cycler" (bicycle driver) seen from above and I want to use a function to duplicate it with actionscript as needed.
So far so good, has been done before.
But in this Symbol I have "sub-Symbols" on the timeline (within the Cycler's animation)... how would I do it to use a setRGB on one of them for each duplicated driver individually? The way I tried it now (see attached files) makes the animation stop for the sub-Symbols I use setRGB on (in my example the shirt of the left Cycler and the helmet of the right Cycler).
Why does the animation stop? I had a similar problem before and I solved it by coloring a fixed simple square on a layer and the animation for the motion was really a mask, ontop of it... but why doesn't it work like this?
Feel free to test is yourself- I am open to suggestions. The Cyclers are called "Biker_1" and "Biker_2" and the sub-Symbols are called "Helm", "Koerper" and "Rumpf", for the Helmet, the Body and the "Rump" of the Cycler.
View 1 Replies
Similar Posts:
Jan 14, 2009
i have a for loop to attach a movieclip X times, and an Array with several color codes to apply in the loop.everything works fine with the setRGB. the movies have an internal background movieclip that gets the color i want to apply.
the thing is the movieclip's loose the animation i created to that internal movie (the one who get's the color). they do not respond to gotoAndPlay, or gotoAndStop...i disabled the setRGB lines, and the movie's play fine now. does setRGB transform my movieclips to a bitmap or something? disabling every animation inside?
View 14 Replies
Mar 28, 2010
I made an animation on the main stage and I need to convert it to a movieclip but Im having an issue. The animation consists of 3 layers one of which is a classic motion guide. Another layer is a ball that follows the guide.
I followed these adobe website instructions- [URL]
But when I play the movieclip my ball no longer follows the guide. Is it possible to convert an animation with a guide layer to a symbol?
View 3 Replies
Jan 2, 2010
The first question: How do you make a symbol a looping animation? Say I want to make a short loop which I can repurpose later.. something such as a falling raindrop or a moving mouth. A webseries I enjoyed when I was younger, Bonus Stage, used the same moving mouth animation most of the series.. I'd like to learn how to make that.
The second, and I'd like to take advantage of the tag on the link leading to this forum that reads "there is no such thing as a stupid question in here"... How do you change the size of the brush tool?
View 1 Replies
Aug 5, 2010
I've been playing with a tutorial to create a rain effect in Flash which I've managed to do.. however, I'm wanting to layer it into an animation.The plan is to have a white 'silhouette' of a window frame, behind that a jpg of a scene. I want the 'rain' effect to be positioned behind the window but in front of the jpeg image.
Even though I have each element on seperate layers, in the correct order, it isn't working and the rain is currently visible on top of everything.
View 7 Replies
Aug 9, 2009
I've got a multi-element character animated in its own timeline, within its own symbol --- but it's not showing up in the main timeline, or on the stage when I exit the symbol and go back to the Main movie view. How do I get the symbol's animation to integrate into the main scene?
View 2 Replies
Jan 7, 2012
my company (FB games) has fired everyone who knew what they were doing leaving me, with no knowledge of flash, staring at my to-do list near tears, unable to complete basic tasks.I need to take an existing walk cycle animation and replace the character with another design. After breaking the new character body into symbols, I've tried to sub them in using swap symbol. The body parts do not line up with the previous symbols, and they also seem to go flying all over the place when I run the cycle. I can't figure out how to just update the symbols without disrupting the placement.
View 2 Replies
Aug 12, 2009
I've searched everywhere online, and can't find the help for this!
I've found some videos, but they did not seem to offer any sort of help for me.
I still cannot for the life of me figure out how to take 3 images, and make them into a simple walking animation and to convert that to one symbol.
Can anyone offer their help to me please so I can get my project going?
I'm using CS4, and all articles I can find are of the older versions of flash.
View 2 Replies
Dec 4, 2009
I am simply trying to move symbols around on my Stage, and each time I move one, the "path" is recorded and the object flows on that path when I scrub or play back.
All I would simply like to do is reposition images and symbols with out the movement and animation.
View 2 Replies
Dec 22, 2009
I am making a very simple stick figure animation which will be intended for tv, specifically HDTV 1080p.I have no idea how i did it but I did the animation and before I knew it it was not on scene 1, but on the graphic symbol timeline. I think it is because I made my character a symbol, and i guess everything followed. But when I put them on the stage from the library, only part of the animation shows up, the part with the character i made into a symbol...not only that, but if I copy and paste all the frames from the symbol timeline onto the main timeline, it is HUGE! it doesn't match the size or placement it was on in the other timeline..Also, are there any specific requirements for editing with intent for hdtv? I read you can't use movie clips but as for size, etc? What do you have to set at the beginning and what will change when it is exported or converted for tv?
View 1 Replies
Oct 18, 2011
I have a VERY big animation, with a huge amount of keyframes, and I like to swap a symbol in this animation with another one. If I just use the swap button on the first frame, Flash only swaps the symbol for the first tween, whereas I have hundreds of tweens in my file... So how do I do this for every keyframe in every tween ?
View 1 Replies
Nov 14, 2009
I have a symbol which I want to contain several loops, but when I play it, it simply stands still. Example:[code]As I understand it, if I start the movie clip at frame 1, it should loop frames 1 and 2, and if I start it at frame 3, it should loop frames 3 and 4. Why won't it work ?
View 1 Replies
Jan 13, 2010
I'm creating an animation kinda like a travel map, x - - - - - - - - - - - - - - - - - - - - x .where the x's equal the start and the end point, and the dashs are like your direction etc, a good example is if you've ever seen those pirate movies where they have the maps and it shows where they have to go.is if there is a better way to do it than I currently am (Still finding my way around the whole Animation thing - and I'm sure theres an easier way than this!)
At the moment I'm going frame by frame and in adding objects, so for example, in frame one I have my 'x' object, then frame two I pasted the 'x' object plus one 'dash' objects, and so on and so forth, and I have a feeling that doing this is going to take agessss, and I'm sure there must be an easier way! I essentially need the 'x' object to span across ALL of my frames, is there a command or something for this? I'm not too knowledgeable with tweening, but can it be done with that?
View 2 Replies
Jun 21, 2011
I've created a symbol which is a loop of animated dotted line. I've applied blur along its path so it looks like motion blur.If I place this inside another symbol and rotate it, the blur rotates also so the blur is no longer along the axis of the dotted line.Anybody know a way of stopping blur rotating within a nested symbol?
View 2 Replies
Jun 6, 2011
I am trying to rotate a symbol on the x axis mulitple times for an animation I am doing. The problem is everytime I try to do a complete rotation, the symbol rotates fine until I hit 180 degrees, but once I go past that mark, the symbol just starts rotating backwards. Is there a certain way I have to do this in order to get a complete rotation in one direction?
View 1 Replies
Jul 11, 2011
When I play my animation in the Flash working file, the animation stops at the end of the timeline, as it should. But when I test the movie, or export it to any movie format, it will play an instance of a movie clip symbol that I used within the animation. There are no extra frames in the timeline beyond what should be considered the last frame. Is there a setting or something I have overlooked that might cause that instance of the symbol to play at the end of the animation, without appearing in the main timeline?
View 3 Replies
Oct 19, 2011
I'm making a map editor in flash. For the map area, a dynamic Movieclip will this and that in it will be loaded into a movieclip area, but I realised the problem of how a symbol resizes when a child is too big in the symbol.
Is there ANYWAY to stop it from it from doing this, as I want a specific window for this where you can drag the map around to see the other areas.
View 1 Replies
Mar 29, 2011
I added a button symbol to a movie clip in a Flash 8 project, and the button works. OnPress it redirects to a web site.However, the animation in the movie clip becomes diabled. I get the same effect regardless of where the button is placed, e.g. scene1 timeline, movie clip, etc.
View 8 Replies
Aug 27, 2008
I have a movie symbol called "dot" of a pulsating dot, but no i would like it to stop after x amount of loops/repeats of the movie symbol.
View 2 Replies
Jun 10, 2009
I've been searching everywhere and I can't find a solution. I use swfobject and flashvars and whenever I use flashvars the dynamic text color won't change. If I put my variable inside the fla timeline, the text color changesHere is my setRGB code:
Code:
var c:Color = new Color(button4.txt);
c.setRGB(0xffffff);
[code]....
View 5 Replies
Sep 13, 2003
Is it possible to use setRGB inside a btn?I have a buttom that has a textfield and a background.I want to change only the color of the textfield!here is the code i`m using:
Code:
function AbtnPress() {
for (var i=1; i<8; i++) {
var btn = _root.A["btnA0"+i];
[code]....
View 3 Replies
May 28, 2010
I am using the most up to date version of SWFobject.When i use a simple rollOver and out state on my mc's .. I have been using setRGB to change the colour depicting the state.However since installing SWFobject - This setRGB property refuses to work.
Code:
t.onRollOver = function()
{
col = new Color(this);[code]....
is how im doing it in flash - simple - but why is SWFO disabling it? .. is it something to do with the parameters?
View 3 Replies
Jan 26, 2009
I am trying to set up a dynamic flash movie so i can set the color of text with a dropshadow applied using setRGB.
Here is the code i am using to set the text color (simple setRGB call):
var my_color:Color = new Color(this.tagLine_txt);
my_color.setRGB(tagLineColor);
Now here is the problem, setRGB automatically makes my dropshadow color the same as the fill color. The only solution i have found is to stack two identical text boxes on top of one another and then setting the dropshadow on the text behind to black to make it look proper.
I have tried using filter to set the dropshadow color as well with no luck:
// Makes the filter available to use in the Movie.
import flash.filters.DropShadowFilter;
// Creates a variable with info about the Filter settings
[Code]....
View 4 Replies
Oct 6, 2011
Code:
onClipEvent(load){
_global.tinta=0xFF0000;
tintb=0xFF0000;
box = new Color("_root.boxy"); //This instance is named "boxy"
} onClipEvent(enterFrame) {
box.setRGB(tintb); //Turns it red
}
This works and makes the box red. However, if I change it so it's "box.setRGB(_global.tinta)", it turns it black. Even setting "tintb=_global.tinta" and using the "box.setRGB(tintb)" doesn't work any more. Why doesn't setRGB() like _global variables?
View 1 Replies
Mar 14, 2003
I was wondering if there is a way to set the opacity of an object similar to the .setRGB thing..
View 14 Replies
Nov 13, 2007
What is the equivalent alpha code to setRGB?Ps Im trying to change this code so it contorls the alpha of a movie clip instance name circle the code is bellow:
Code:
onClipEvent(enterFrame){
_parent.alpha = (_parent.RedSlider.RedControlBar._y+122).toString(16);
if (length(_parent.alpha) == 1)
_parent.alpha = "0" + _parent.alpha;
[code]....
View 1 Replies
Apr 23, 2004
I need to convert an integer value to hex to use with the setRGB thingy. (I want a slide bar that controls the colour of a movie clip) I know that you can use parseInt to get an integer from a hex value but how do you do the opposite?
View 3 Replies
Feb 23, 2005
Ive got a button with black text that text fades blue on(rollOver) & I also have this script attached to the button.
on(press) {
myColor = new Color(this.servicesTxt);
myColor.setRGB(0x990000);
[code]....
Although the .setRGB turns the button text back to black the button text doesnt fade to blue.How do I remove the .setRGB(0x990000); on (release)?
View 1 Replies
Aug 15, 2009
I am using button navigation, and the only way I can get it to work is to use th stop command so the buttons are the only way to navigate. My problem is I need to add an animation and because it's jumping through the applet it isn't animating, I have an animation on a new layer, but it won't play or loop, is there anyway I can get this simple animation to loop constantly in spite of the stop commands in the other laters, I have to have an animation for the project to be valid.
View 4 Replies
Feb 2, 2005
If I have a piece of a function that is telling Flash to[code]...
How do I tell Flash to call a MovieClip as opposed to setRGB for the background MovieClip?
View 4 Replies
