ActionScript 2.0 :: Unable To Play Flv From Xml Though The Xml Loads Perfectly Fine?
Feb 27, 2008
I am unable to play flv from xml though the xml loads perfectly fine. When flv path is hardcoded the video plays fine but when from a node it seems to make the video disappear and it dosent play.I am having the same issue i got the xml loaded and even the url into the video source but it dosen't seems to play the video when reading from xml...
[code]...
View 1 Replies
Similar Posts:
Jul 12, 2009
I am using CS3. I am having trouble viewing my FLASH content online. It loads fine in DW locally, but once on the server I have the following errors: Webpage error details
[Code]...
View 1 Replies
Jul 8, 2010
I am trying to make a preloader, althought it loads just fine the preloader bar wont move, better: the filesize against the loaded bytes does not let it move.
Code [URL].
View 10 Replies
Oct 30, 2011
I've had Flash CS4 (a legally purchased single-user licence) since the day it came out and used it practically every day without any major problems. Today I opened it up to carry on with some work, and it crashed. I had a whole host of other stuff that was open and updating at the same time, so I waited until that was done, then I tried again. It crashed. So I rebooted, and tried again. It crashed. Slightly panicked, I uninstalled Flash CS4, rebooted, re-installed it, and tried again. It crashed. Panic giving way to anger, I googled the issue, and this time uninstalled, with 'Remove user preferences' checked, went through my Windows system and manually deleted any associated files in my Application Data folder, rebooted, reinstalled, rebooted, and tried again. It crashed.
I have now just downloaded the Adobe CS4 Cleanup utility and run it, but after twenty minutes hanging at the 'Removing all session folders' screen and no processor activity I could see, I quit the program. I'm tempted to try reinstalling again (obviously) but I'm pretty sure I know what's going to happen.Just so it's clear, here are a list of the variables involved:Registered single-user licence of Flash CS4, running without issue since 2008Windows XP SP3The Flash IDE opens fine on its own, but crashes when it tries to open ANY Flash fileI have CS4 installed on my laptop, and that can open the same files fineAny
View 3 Replies
Dec 18, 2007
I have made a 3d carousel based on the tutorial at gotoandlearn.com and it looks awesome...however when I try to put the swf in html it does not show up.
[AS]
import mx.utils.Delegate;
var numOfItems:Number;
var radiusX:Number = 500;
var radiusY:Number = 125;
[Code]....
View 1 Replies
May 7, 2009
I'm using Flash CS3 Pro. and actionscript 2.0 for my flash documents.I have a flashfileA.swf which is a picture of a rotation shoe (view here)it has a slider bar that calls the action to zoom while rotating. if you checked it out, it works fine.
the code I have for the slider is this:
Code:
this.perc=0 ;
handle.onPress = function(){
this.startDrag(false,0,0,375,0);
[code]....
so I have flashfileB.swf that I load that flashfileA.swf into. Initially, I was getting pages of pages of "Security Sandbox Violations".
I added the code:
Code:
System.security.allowDomain("*");
in flashfileB.swf and that seemed to get rid of all of the violations but the slider doesn't zoom the shoe when I'm using it in flashfileB.swf I need to get the zoom to work while it's loaded within flashfileB.swf and I'm assuming it has to do with the way I coded it.
View 11 Replies
Jan 22, 2011
I play games on Pogo and have never had a problem with their Flash Games until released Daily Hot Shots. It doesn't load fully and I've done EVERYTHING I know to do to get it to play. No errors show up. I can play ALL the other flash games but this one. When I right click, the name of the site's owners do not show up....I have the settings showing though Not all of the game loads and that's the problem. I've tried uninstalling and reinstalling....tried a different browser and have the same exact problem. THIS GAME WILL NOT PLAY.
View 2 Replies
Sep 13, 2010
I have two SWFs on an HTML page. One loads fine and the other (loaded externally) apparently fails.
I get this from the server:
Error #2044: Unhandled IOErrorEvent:. text=Error #2036: Load Never Completed.
I get this when testing it locally in Safari:
Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
I don't really understand where the hick-up is... because my paths are actually quite simple. All my flash files on the website are located in the same folder. The first one loads in fine, but the one being loaded into it does not. When viewing the SWF by itself, everything checks out as well.
View 7 Replies
May 30, 2009
I have a problem with a FlvPlayBack movie. So when I load the .swf, and click "Play Trailer" locally it works perfectly. But when I load the .html page, and click "Play trailer" the player doesn't show up and it won't play the video.
Link to .html page What files exactly need to be on my server in order for the video to play? Have I called the video wrong? (the .flv file is on my server)
View 3 Replies
May 5, 2009
I've got my swf which plays fine when opened in a browser - it's a container called 'country' that's coded to load the different clips (clip1.swf, clip2.swf, etc.) - but when placing it into an HTML page it won't load the clips and I'm thinking it's because of some actionscript error.
[URL]
Scripts are all loaded on the server in the /Scripts/ folder Below is the ActionScript from the country.swf container that loads the clips. what I'm doing wrong to get it to load on the HTML page?
function _playClip(fileName)
{
var clipName = fileName.substring(fileName.lastIndexOf("/") + 1, fileName.indexOf(".")) + "_mc";
if (_root[clipName] == undefined)
[code]....
View 2 Replies
Jun 4, 2011
I made a simple 15 second animation. When I play it in the program (not published yet), it plays fine. When i publish it however (I have tried both flash published and HTML published), it plays about 3/4's of the way, and restarts. The second time through (and from then on), it plays fully, just fine. How do I stop this?
View 1 Replies
Dec 1, 2010
I have created a SWF file that plays/stops sound. The SWF file works great when previewed in Flash CS4, but does not work when inserted in the HTML file.Here are the 2 files that are automatically generated when I INSERT>MEDIA>SWF in Dreamweaver CS4:
swfobject_modified.js
expressInstall.swf
Here is the ActionScript3 that I am using in the Flash file:
[code].......
View 6 Replies
Sep 29, 2010
I want to create a preloader, but I don't want to deal with percentages and loading bars... I just want to play a movie clip while it loads.
View 1 Replies
Jun 29, 2009
I am working with Captivate 4 and have embedded a SWF that has AS3 code to dynamically an image (among a few other things) that needs to position another animation based on the size and position of the image. I've tried placing the animation in the captivate file directly and referencing it with this.parent.name which didn't work and seeme to break the rest of the code. I also tried loading the animation as a separate external swf which works until it's embedded into the parent. It loads it and positions it but won't advance it past the first frame even when I called objectname.play();
View 9 Replies
Nov 17, 2007
i have this code below that allows me to switch between images using a mc button, but when i press, the mc loads but does not play the fade in? Can someone explain what is missing in this code that skip the play?
[Code]....
View 3 Replies
Aug 6, 2010
I have a flash template that I bought and customized with dreamweaver, flash and Coda html editor, the website test PERFECTLY when I test the index.html file, all of the buttons work fine, I have a total of 12 .flv videos and they ALL play back fine, when I play the index.html file, the problem occurs when I upload the files to my godaddy server, 11 of the videos play fine, the whole site is fine, it is one particular .flv file that will not play once it is uploaded to the server. I have changed the orders the video play, renamed the file and changed the html flv path to reflect the name change, I have deleted all the files off my server, refreshed the server logged out and re logged on and uploaded everything again, I have re-encoded the original .mov file to a .flv file again using Adobe media encoder, still nothing, I am wondering why would the index.html play this particular .flv file fine, but once uploaded to the server it will not play, the path is correct I have checked it, if the path were the problem the index.html for that particular file would not play when I test the index.html file before I upload it, but it plays fine until it is uploaded, I am uploading the whole folder on the root, and this particular video file is in a folder with all the rest of the .flv files, I even tried changing the path and putting this particular .flv file in a seperate folder and change the path still nothing.
View 7 Replies
Jul 5, 2009
I'm using Flash CS4 and have linked to a video that hosted on a web server with one of the preloaded flash video skins (ArcticExternalAll). When the page loads the video plays without any problems, but I would like to make it so the user decides when the video starts rather than it automatically starting when the page loads. Is there any way to do this?
View 3 Replies
Oct 23, 2010
(Slightly different from the person's post below.)I have been using FLV-encoded short movie (1mb - 10mb) files with good success, but now I have encoded and uploaded a new movie (encoded with Adobe Media Encoder), and, when tested here on my computer, all works fine, I get the movie and the controller skin. However, I've uploaded the files to their proper locations, and when I go to the URL, the movie file will not load/play on the web page! All of my other previous movies (this is the same site/directory, no changes there) load and play fine. This new movie seems cursed. I tried encoding several versions, each slightly different.
View 7 Replies
Nov 8, 2011
I have a sound in the library named RolloverSound and a MovieClip on the stage with instance name of btn. I hear this sound whenever I rollover btn and that's all I want it to do. The problem is is that it also sounds off when the swf loads and I don't want that.
[Code]...
View 6 Replies
Jan 14, 2009
I have been working in Flash CS3 now for a couple of months and action scripts have been a challenge for me. I have created a site that has 4 areas that play a looping swf file of images. I can get this to work no problem with a behavior for rollover, but what I am looking to do is have the 4 swf files automatically play when the page loads.
The swf file I want to play is really simple, just images of banners.
View 9 Replies
Apr 12, 2010
The problem is I have an MC in the library the gets attached to the stage dynamically and when that happens, my FLV doesn't play. I thought perhapse it was a matter of the FLV being loaded under the other MC but I've tried "swapdepths" to move it to the top, and I've tried "removeMovieClip" to get rid of the other clip to show the FLV.
Nothing seems to work. All my trace statments are trigering so I know the function is working properly (except getting the video to play).
// Create a NetConnection object
var my_nc:NetConnection = new NetConnection();
// Create a local streaming connection
my_nc.connect(null);
[code]....
View 2 Replies
Sep 22, 2009
My "train of albums" loads but won't play until I reload the page. I want to keep the bitmaps in memory if the user comes back to the page. bitmaps are 100k jpg's.
The Action Script 3 asks "if the albums are already in memory" start the "animation" if not, start loading.
Code:
if (theAlbumArray.length < albumArray.length){
LoadAnAlbum(); // starts loading art
stage.addEventListener (Event.ENTER_FRAME, fillBuffer);
[Code]....
View 1 Replies
Sep 21, 2009
I'm using Flash CS4. Whenever I make a button go to a frame that has a tween in it, it will not read it. When I take the tween out and not have the frame have any animation then it is fine.
Attachments:
screen.jpg
(463.5 K)
View 16 Replies
Jul 1, 2011
I am doing an interactive display for school and it includes 2 games and 5 movies.I have it all set up the way I want it, but I have a HUGE problem, my movies will not play!! I am using 2 different codes, one for the games and one for the movies, they are below:
Games Code: loadMovie("filename.swf" , 1);
Movie Code: container.loadMovie("filename.swf");
The movie code has worked before, but for some reason it is not working now! If ya'll have a different code for uploading .swf games and movies ! These are all being uploaded and I am navigating them through by buttons and those seem to work great! Another thing, I have it set at 2 fps but some things get cut out because it goes too fast, but if I slow it down anymore the games won't work.
View 1 Replies
Nov 26, 2010
I made a 'movie' in Premiere and exported as FLV., Its suppose to be a banner on the top of a web page. The site was made with Dreamweaver. When played locally, the banner does great. When I put it on the server, thats a different story. I can tell thats something is there because it loads the background color of the flash file but it doesn't play the FLV.
View 1 Replies
Oct 22, 2005
I have on one file (player1.fla), a movie that plays MP3s from an array, which I specify in that movie. The code for that works just fine.I've duplicated the file and renamed it to a different one (player2.fla) so I could load the MP3s from a variable (array) on a text file. This way, to add more songs, all I would have to do is update the text file.
I changed the code around a tiny bit in the "player2.fla" file to accomodate for loading a text file, but nothing more.*My Problem* The text file loads properly and displays the Title of the mp3, but it won't play the mp3.The text file looks something like this: (just an example)
Code:
&songs=song1.mp3, song2.mp3, song3.mp3
&songTitles=my song1, my newer song, the third song
My script is very similar to this: (shortened; just an example)
Code:
lv = new LoadVars();
lv.onLoad = function() {[code]......
View 3 Replies
May 5, 2009
I have embedded a flv video onto the stage. I then have loaded in an image which is transparent enough to see the video through it. The problem is I cant now access the video player to control it. Is there anyway to bring the embedded video on the stage above the loaded in image so I can actually click play on the control bar and play the video?
View 3 Replies
Jan 18, 2011
I have a colleague who is trying to put together a Flash package for me on her macbook pro. It needs to play an flv file. She is unable to play flv files on her computer either in Flash or using the Adobe Media Player. I have no problem playing the same files on my macbook pro, we're both running the latest OS and have version 1.8 of Adobe Media Player. She went to the Adobe site to download the latest version of Adobe Media Player, hoping that might include whatever component is missing on her system. Because of Adobe's decision not to distribute AMP that didn't help.
She has Flash Professional CS5 11.0.2 on her system. When she imports an flv video into a Flash project and tries to play it she gets an error message saying it can't stream the video. Note that the video is on her hard drive, it is NOT on the internet so no streaming should be required. The actual error message is: "the video player is in the connection error state. It enters this state when a video stream attempted to load but was unsuccessful. There are two possible reasons for the error: no connection to the server or the stream was not found." Since it's a file on her hard drive, and she has loaded the file into the Adobe development environment successfully, the one thing we know for certain is that neither of these reasons is correct.
View 1 Replies
Nov 19, 2010
I have an image scrolling setup like in itunes, however I am unable to click on the images to play a frame in my timeline (i.e. I�m going to click on one of the revolving pictures, which change to another frame, enlarging a square on the page which contains information). So every image that is rotating enlarges a square at the bottom. What changes do I have to make in order to do this. Below is the action script:
[Code]...
View 2 Replies
Sep 2, 2004
I'm trying (and failing it seems) to teach myself Action script and I'm having a really tough time with what I'm sure is something that quite easy to do. Basically I have one button. When this button is pressed I'd like it play a movie. When the button is pressed again I'd like to stop playing the movie. In the first frame of the movie I've put a stop action so that it doesn;t repeat itself when it finishes playing. In the last frame of the movie I've put gotoAndStop(2);In my main timeline I have 2 layers each of which has one frame. The button is one layer and the movie on the other.
I selected the button on the stage and gave it the actionscript
on (press){
gotoAndPlay("vcsound_mc.play(2)");
[code]....
View 5 Replies