ActionScript 3.0 :: Unable To Play A Frame
Sep 21, 2009
I'm using Flash CS4. Whenever I make a button go to a frame that has a tween in it, it will not read it. When I take the tween out and not have the frame have any animation then it is fine.
Attachments:
screen.jpg
(463.5 K)
View 16 Replies
Similar Posts:
Nov 19, 2010
I have an image scrolling setup like in itunes, however I am unable to click on the images to play a frame in my timeline (i.e. I�m going to click on one of the revolving pictures, which change to another frame, enlarging a square on the page which contains information). So every image that is rotating enlarges a square at the bottom. What changes do I have to make in order to do this. Below is the action script:
[Code]...
View 2 Replies
Nov 21, 2007
I have my flash on multiple scenes, and would like to play an animation when clicking on the navigation button before switching to a different scene.
I'm halfway to accomplishing this.
Here is what i used
Code:
_root.gotoAndPlay("changepage1");
_root.onEnterFrame=function(){
if(this._currentframe=="changepage2"){
[Code]....
The above code is on a blank keyframe. Changepage1 is the start of the animation and Changepage2 is the end of the animation.
Upon clicking the navigation button it plays the above scenes.
However it doesn't change scenes to scene "Home2".
View 1 Replies
Apr 12, 2010
The problem is I have an MC in the library the gets attached to the stage dynamically and when that happens, my FLV doesn't play. I thought perhapse it was a matter of the FLV being loaded under the other MC but I've tried "swapdepths" to move it to the top, and I've tried "removeMovieClip" to get rid of the other clip to show the FLV.
Nothing seems to work. All my trace statments are trigering so I know the function is working properly (except getting the video to play).
// Create a NetConnection object
var my_nc:NetConnection = new NetConnection();
// Create a local streaming connection
my_nc.connect(null);
[code]....
View 2 Replies
Jul 1, 2011
I am doing an interactive display for school and it includes 2 games and 5 movies.I have it all set up the way I want it, but I have a HUGE problem, my movies will not play!! I am using 2 different codes, one for the games and one for the movies, they are below:
Games Code: loadMovie("filename.swf" , 1);
Movie Code: container.loadMovie("filename.swf");
The movie code has worked before, but for some reason it is not working now! If ya'll have a different code for uploading .swf games and movies ! These are all being uploaded and I am navigating them through by buttons and those seem to work great! Another thing, I have it set at 2 fps but some things get cut out because it goes too fast, but if I slow it down anymore the games won't work.
View 1 Replies
Jul 13, 2006
i have a movieclip on stage. it has 3 frames but is stopped with "stop():" so it only shows the first frame on mousedown i want it to play frame 2 for a duration of 1 frame then frame 3.
View 3 Replies
Mar 13, 2011
I hope I can ask this correctly. I'll paraphrase.
press_mc.onRelease = function(){
mover2_mc.play()};
This is a snippet of some code I'm working on. Currently I have a mc that you press that plays another mc. That mc that reacts has 5 frames, each frame with stop(); on each frame. I do a normal play code because it lets me play through and cycle back to frame 1 after frame 5 (so if I click the mc it eventually cycles back to the first frame and starts the process over again). If I do a nextframe it stops at frame 5, so that's why I use play.
press_mc click on it and it tells mover2_mc to advance a frame and recycles back to frame one to redo the process.Can I tell press_mc to play and skip a frame or to have it play a list of frames that I tell? I can't do a _currentframe +2 because it'll halt at frame 5.
View 6 Replies
Dec 22, 2009
I have a problem exporting a flash movie to a Quicktime movie with the correct frame rate. When I try to transfer it to a DVD that will play in loop, the video is jerking. I really need to get a 30 fps video.
I'm using Flash CS3 on Mac OS X. I built my flash animation with photos and text only (no SWF or movies linked or embeded, no actionscript, no sound, one scene only). The frame rate I specified in my flash movie is 30 fps. My scene format is 1360 x 768 pixels (16:9).
I need to export my flash movie in an almost uncompressed format to bring it to a DVD.
[Code]...
View 2 Replies
May 5, 2009
I have embedded a flv video onto the stage. I then have loaded in an image which is transparent enough to see the video through it. The problem is I cant now access the video player to control it. Is there anyway to bring the embedded video on the stage above the loaded in image so I can actually click play on the control bar and play the video?
View 3 Replies
Jan 18, 2011
I have a colleague who is trying to put together a Flash package for me on her macbook pro. It needs to play an flv file. She is unable to play flv files on her computer either in Flash or using the Adobe Media Player. I have no problem playing the same files on my macbook pro, we're both running the latest OS and have version 1.8 of Adobe Media Player. She went to the Adobe site to download the latest version of Adobe Media Player, hoping that might include whatever component is missing on her system. Because of Adobe's decision not to distribute AMP that didn't help.
She has Flash Professional CS5 11.0.2 on her system. When she imports an flv video into a Flash project and tries to play it she gets an error message saying it can't stream the video. Note that the video is on her hard drive, it is NOT on the internet so no streaming should be required. The actual error message is: "the video player is in the connection error state. It enters this state when a video stream attempted to load but was unsuccessful. There are two possible reasons for the error: no connection to the server or the stream was not found." Since it's a file on her hard drive, and she has loaded the file into the Adobe development environment successfully, the one thing we know for certain is that neither of these reasons is correct.
View 1 Replies
Feb 27, 2008
I am unable to play flv from xml though the xml loads perfectly fine. When flv path is hardcoded the video plays fine but when from a node it seems to make the video disappear and it dosent play.I am having the same issue i got the xml loaded and even the url into the video source but it dosen't seems to play the video when reading from xml...
[code]...
View 1 Replies
Jul 3, 2010
how to code this on a button
onrelease
gotoandplay(10); // i need delay here before activating the next code below//
gotoandplay(80);
the trick is.. i want the button to play frame 10 to 40 then after playing from frame 10-40 the movie stops and then play frame 80 to 100
View 4 Replies
Mar 8, 2005
I'd like my Flash site to be bi-lingual. What I have currently is a Flash movie with an empty Movie Clip which then allows users to go from movie to movie. The movies are all small movieClips that are loaded into the empty movieclip on demand. There is some video and text in each of the 30 movieClips.
Here is sample of code that i'm using to call up next MovieClip.
[Code]...
My solution for the bilingual version is to create a separate frame with the French version + video and then when user presses the French button they are directed to that frame. This way I could easily create the French text within the one movie. however i don't know the Actionscript code to call up a movieClip to play from frame 10, and not frame 1.
View 3 Replies
Jul 23, 2004
I am creating a site, and it has a animation that it has to play before loading the next section. What I cant figure out is what function I need to create so that when a user clicks on the vision button it will play the frame after stop(); which will close that section, then have it load the frame for the section that the person clicked on. The only way I can think of doing this is creating 3 different close animations for the three sections. But I figure there has to be a way to have it play the one close animation and then goto the frame which is the portfolio section or vision section (depending on the button clicked).
View 1 Replies
Jul 23, 2004
I am creating a site, and it has a animation that it has to play before loading the next section. What I cant figure out is what function I need to create so that when a user clicks on the vision button it will play the frame after stop(); which will close that section, then have it load the frame for the section that the person clicked on. The only way I can think of doing this is creating 3 different close animations for the three sections. But I figure there has to be a way to have it play the one close animation and then goto the frame which is the portfolio section or vision section (depending on the button clicked).
View 1 Replies
Sep 6, 2011
I built a button in one of the movie clips in my project,
when I release this button, it goes to the 41st frame of the main timeline and continue to play until the frame 70 which has got a stop; command. till here everything's just OK. But I want this button to do something more though I don't know whether it's possible or not.
I want this button to go and play the frame number 41 in the main timeline, and then after it stopped at the frame 70 , then jump to frame 73.
View 5 Replies
May 25, 2011
I have a small flash site made up of a number of pages all on the one timeline.
The query is this. When i release a button i want the timeline to roll on for x frames (fading components out) before going to the frame that button links to (The beginning of the new page).
I have no idea what AS to use for this.
No matter where in the timeline you are, the button should fade out that area and then skip to a new one.
View 2 Replies
May 7, 2006
When you click a button I want my flash to go to the frame label where the movie clip is located, and then play a certain frame of that movie clip.
View 5 Replies
Jul 17, 2002
I'm creating an effect in flash mx where lasers follow a guide path and reveal a word beneath. I was setting it up making it drop behind a square where the spark travelled and i used the setmask command to mask it, problem is, the setmask command only works with one instance at a time! Can i group multiple instances with actionscript? Or can i have it dump the squares on a mask layer with actionscript.I was also wondering if i could just make the script play on every frame without copying it to every frame? I tried the on enter frame deal but it didn't work.
View 3 Replies
Mar 5, 2011
i have created this matching game from thing ive learnt. but im haveing a prob.when the game over function is run i want to; gotoAndStop("gameover") frame lable but it wont work here is my code
ActionScript Code:
package
{
import flash.display.*;
[Code]....
View 4 Replies
May 18, 2002
A quick question for anyone who has patience with this newbie. I'm using Flash MX. I'm trying to load a movie contact.swf from a button. Now I am able to get it to load and stop at a certain frame. What I want to do is be able to hit the same button again and have the contact.swf movie continue it's play which is a fade out.Can this be done? And what might the code look like?
View 6 Replies
Sep 2, 2004
I'm trying (and failing it seems) to teach myself Action script and I'm having a really tough time with what I'm sure is something that quite easy to do. Basically I have one button. When this button is pressed I'd like it play a movie. When the button is pressed again I'd like to stop playing the movie. In the first frame of the movie I've put a stop action so that it doesn;t repeat itself when it finishes playing. In the last frame of the movie I've put gotoAndStop(2);In my main timeline I have 2 layers each of which has one frame. The button is one layer and the movie on the other.
I selected the button on the stage and gave it the actionscript
on (press){
gotoAndPlay("vcsound_mc.play(2)");
[code]....
View 5 Replies
Feb 5, 2009
Using MX 2004. I would like to play the entire movie twice, then start playing a third time until frame 30 and stop.
View 1 Replies
Jun 5, 2009
Yesterday Kglad gave me the following :
nextTX.onRelease = function (){var nextFrameLabelNum:Number = (1+Math.round(thTX._currentframe/27))%10;
thTX.gotoAndPlay("next "+nextFrameLabelNum);
}[code].....
which works great IF I am moving one image at a time.What I have done now is tween 3 slides to move into a visible mask by pressing next, but when I press previous of course the above doesn't work.It just jumps to the previous three with no tween.I would like to maintain the tween but in reverse.I would like the previous just to undo, in reverse, what the next button just did with the tween?Is there anyway to make this happen with as 2.0?
View 1 Replies
Nov 29, 2009
In this bit of code is there anyway to adjust the gotoAndPlay Command to play from frame 114 to frame 200. Are there any commands that will do this. I want it to play from frame 114 to frame 200 when a button is pressed.
[Code]...
View 1 Replies
Dec 5, 2010
I'm building a flash application where the user can play multiple 30 sec .flv movies (one at a time) in slowmotion by pressing or holding down the left and right arrows keys.The user can hold/press "keypress right" to move to the next (key)frame and "keypress left" to move to the previous (key)frame in the .flv files.I have tested embeeding one .flv movie to the stage and it's working fine.But since I will be using many flv's I want to load the .flv's dynamiclly (on button clicks) using netstream or FLVPlayer. Would it be possible to step beetween keyframes in the same way if the .flv's are loaded dynamiclly? Or, must I embeed each .flv file into separate swf's and then dynamiclly load the swf's to my main stage?
View 1 Replies
Aug 1, 2011
I want my MovieClip to play from frame 5 to frame 30 and then stop. How can I do this?
View 5 Replies
Dec 28, 2011
Here is my code:
public function main() {
stage.addEventListener(KeyboardEvent.KEY_UP, hurdlesReactToArrowKeys);
var loginScreen:dealerLogin = new dealerLogin
[code]......
View 1 Replies
Jul 29, 2011
I am new to flash and creating a file with a series of 25 images. I have each image on its own keyframe in the stage1 and I have buttons for: play_btn, stop_btn, next_btn, prev_btn My next and prev buttons work ie...
[Code]...
but I am unable to get any AS3 code to work as a Mouse.Click to play the series of keyframes. Every time I try to add a gotoAndPlay to the play_btn my file just starts a continuous loop.
View 6 Replies
Aug 12, 2009
i have installed flash media server 3.5 ..windows vista and using FLASH 10right now in Flash Media Server page I am only able to play HTTP sample,RTMP file is not working , i check the sample folder >> and open HelloWorld >> that shows error :: Error #2044: Unhandled NetStatusEvent:. level=error, code=NetConnection.Connect.Failedat HelloWorld/connectHandler()what should i do now need ur help urgent
View 5 Replies