ActionScript 3.0 :: Animation Running Out Of Memory
Mar 3, 2011
I am trying to create a relatively simple animation in Flash CS5. I've built out 40 seconds of a 3-minute cartoon and now it won't let me add so much as a keyframe without telling me to clear up some virtual memory.I'm running this on a new laptop less than a year old. Lots of hard drive space and 4 GB of RAM. No viruses or anything. Very fresh pc. Nevertheless, I adjusted the virtual memory paging size to the maximum allowed. No change - I get the same error.I've tried opening the existing file on two other computers and Flash CS5 simply crashes when I try to open it.The animation I've built has about 20 layers, each using one symbol per layer. They were created from illustrations saved as PNGs, none of them larger than 200 kb or so. I have a small mp3 audio file I am syncing it to as well. I've set the properties to 550 x 550 pixels with 30 frames per second.I have a deadline for this thing of March 25th and I've been trying to solve the problem on my own for the last two weeks.
I am having problems getting animations to occur at all levels/layers. So I have the main timeline level and when I drill into that layer, I have a character made up of several graphic symbols - shapes such as arms, legs, torso, etc. When I create keyframes and then try to reposition symbols to create animation, the movement is not appearing at all levels. for instance, if the arm is by the side in frame one, then I go to frame five and drill down into the symbol and reposition, the timeline will show the change from frame 1 to frame five at that level/layer, but not on the main timeline for the entire character.
I'd like to find the best way to calculate the actual time for the animation to be played. In my scenario, I have a button to start animation and button to stop it. Animation is set to run 3 second. I'd like to know how long the animation did ran after I press the stop button.
im having a little issue with my character animation when i use the arrow keys to move him. everything works but the fact that the "Running" animation wont stop. i tryed i few things and i only end up breaking the code.
if (Key.isDown(Key.RIGHT)) { this.gotoAndStop(2); _x += speed;
I'd like to find the best way to calculate the actual time for the animation to be played. In my scenario, I have a button to start animation and button to stop it. Animation is set to run 3 second. I'd like to know how long the animation did ran after I press the stop button.
I'm just a beginner to actionscripting. I have 3 movie clips in an animation. All I want to do is, I want to start running the first one, upon completion, the second one should start while the first running again. Any approach and the options available in AS2.0?
im having a little issue with my character animation when i use the arrow keys to move him.everything works but the fact that the "Running" animation wont stop.
if (Key.isDown(Key.RIGHT)) { this.gotoAndStop(2); _x += speed;
I'm trying to stop an animation running that I've imported from an .SWF file.I've loaded it using the new URLRequest method, but now I can't seem to talk to it.Is it possible to Talk to it, or should I just leave it in the Library and pull it from there.
I currently have 6 scenes in my current movie. It's going to be an online portfolio and each page is a section of the portfolio. However, I have an animated background (400 frames long) that I want to be played throughout the entire site. Of course, when I try and do this the animation resets every time the scene changes. The best I could do so far is to have it running on every page this way but like i said, it resets every time the scene changes. Is it possible to set this background to run smoothly through the portfolio without resetting?
I have a project for mobile where some of my animations scenes look as though they are winding up or playing in slow motion (from the start). They start out slow for about three seconds, as if they are winding up or in slow motion, and then they run at a normal pace. It only happens on specific animations and is consistent on different devices. Also, once I come back to the scene (revisit), the animations run normally from start to finish.
I have had some success in speeding up some animation by doing the following: In some scenes, the following would occurr: 1) a character was walking 2) the character grew in size though tweening 3) the background was animated as well ect. In other words, there were several things happening in the animation. In this example, I made it less complex by keeping the character the same size and making the background static. This helped alot. However, for the aforemation animations, I have tried everything (I am aware of) and nothing has helped. I'm not sure what to do next.
I'm developing a web application with Flash CS5 and AS3.0. The problem I'm having is this:At a certain state, the application goes to a frame with a "loading..." animation that loops continuously until the next state is reached. The animation is inside a MovieClip that lives on this frame on the stage (I'm not creating or animating it dynamically). While in this state, the app is waiting to receive a large xml file from an XmlSocket connection. The file takes a few seconds (literally - not milliseconds) to be received fully by the Flash player, and during this time the loading animation stops. I believe the socket is blocking the animation thread until it's done receiving the entire file.Does anyone know of a workaround that would allow the animation to keep playing while the socket is receiving? I've seen pseudo-threading hacks, but those always deal with computations or other activities that can be accomplished by calling a call-back function multiple times. Since I'm just listening on an open socket, there's no callback I could pass to a pseudo-thread.
I have a bit trouble with LoaderMax memory occupy, i have a queue, and i am keep loading images depend on user's action. if they click load more and it keep load, but i would like to clean the memory which been occupied by the previous queue (i have remove all the children been added by the loading previously). is there a way i can do it? the behavior like this.
I have an FPS monitor running and notice that I am getting choppiness here and there, bringing my game from 40 to 27 fps and back and forth at certain stages. I have an idea of where it is happening, but do not know for sure. I looked up quite a few memory monitors but haven't found anything decent yet. Is there a memory monitor that allows you to see the memory leaked and find its location? If not, how about just he memory leaked?
I have a strange problem. When I run an exe projector that I exported from flash cs5.5, and on few of my client's computers it running very slow in full screen.When I running an swf file (not exe projector), also in full screen, it running well!I checked my clients computer hardware, and it match the system requirements of flash player.
I have a problem in Flash Site uploading.That is, i have created a flash site & in the dreamweaver i inserted the flash site as insert -> media -> Shockwave.The site is running inside the dreamweaver but when i publish it, flashsite is not running.
I'm making an isometric game and I need to know which takes less memory for scrolling, making everything invisible that you can't see? Like if(!this.base.hitTest(worldHitter))this._visible = false; Or would it be better to remove the movieclips unseen and then reattach them when i should see them?
I wrote an application in flash AS3, and when I trace from flash the total memory usage of the total application is only about 9MB, But at the same time Task Manager Shows the memory usage as 110MB. Around 100MB difference.Flash Trace Method System.totalMemory difference of the Trace from the Beginning of the application to end of the application.
I have a movieclip that shows an animation onRollOver and an animation on RollOut but onRelease the animation enlarge itselfs but now when I'll roll out when the animation isn't open (so i didn't release) the animation plays the animation for the minimizing of the animation. Here's my code (I know its a bit amateuristic but I'm not a programmer )
ok lets say you create a button that when held down play an animation of 20 frames if realsed it goes to frame one and stops if held down it plays out this animation. for the topic lets say you have a fire animation and you want the fire to apear and if the user hold its down the animation reaches the end of the time line and loops back and plays the last 5 frames of the animation and as soon as it is let go it goes to and stops at frame one. Well i know how to make a button that when held down plays out an animation. And i know how to say when released goes to and stops at frame one. What i dont know how to do is to loop the fire at the last 5 or 6 frames so the user can hold it down all day long and play out that animation.
Ok when you press link one it olads great! when i press link 2, it plays the closing animation, but not the entire animation, thats the problem.My closing animation is a red square going from one end to another ( for the hell of it).But you see content number two will load b4 the red square gets all the way across!!
Now I have 2 movieclip. Mc1 & mc2. I planned to to make mc2 do certain animation and user must input the key within the progress animation of the mc2 in order prevent something happen
so I have a looping animation that is several frames long. Inside the animation is a button, when pressed I want to go to another part of the timeline, where another animation is waiting. Simple, I got that working no problem. But... I need the first animation to go to the last frame in the loop before starting the next animation. The way I have it now makes an ugly cut, and the transition between animations isn't seamless.
I have a certain set of motion twains that I've successfuly completed, they constantly loop right now (default), and is saved in the SWF file.I'd like to take that finished looping animation, and insert it within another animation (a) that can be played with a play button, and stopped/resetted with a stop button.How do I insert the completed looping animation into the main animation? And is there something special I have to do in the actionscript of the start and stop buttons so that the "inner" looping animation will start and stop with the "outer" main animation?
I have created two buttons (Button1 and Button2). When you click Button1, an animation pops up. You click on the animation to close it - that works fine. If I then click on Button1 again to replay the animation, the animation does not show. If I click on Button2 THEN go back to click on Button1, the animation plays. Why can I not click that same button twice in a row? What am I doing wrong?
im trying to do is have a button that shows an animation (created by a duplicateMovieClip function) with onRollOver and stops the animation with onRollOut. It works when i roll over and it stops when i roll out, but then it continues in a loop up to the point where i rolled out (instead of cutting off completely as i would like). Id be extremely grateful if you could tell me where im going wrong.
i have a over and out animation but i only want to play the out animation when the over animation has completely finished and the same with out animation. i have this code
I was able to create an animation which only runs when I place my cursor over the animation box.The animation stops playing when I remove the cursor off the animation box.I was able to do this using button rollovers.How do I apply a URL link to this animation.When I place my curser over the animation box it plays,and when I click on the animation box I would like it to link to a web page.
On a horizontal bar, text scrolls from left to right, continuously. The text is a fixed string of city names, and I've made it so that it loops nicely. This horizontal bar with scrolling text is part of a vertical animation, scrolling the bar in and out of view. The vertical tween starts after two seconds. When the vertical tween starts, the horizontal animation has started as well. At the beginning and end of the vertical tween, the horizontal tween starts over. I want it to continu.
