i have a over and out animation but i only want to play the out animation when the over animation has completely finished and the same with out animation. i have this code
[Code]...
I have a certain set of motion twains that I've successfuly completed, they constantly loop right now (default), and is saved in the SWF file.I'd like to take that finished looping animation, and insert it within another animation (a) that can be played with a play button, and stopped/resetted with a stop button.How do I insert the completed looping animation into the main animation? And is there something special I have to do in the actionscript of the start and stop buttons so that the "inner" looping animation will start and stop with the "outer" main animation?
View 1 RepliesI have a movieclip that shows an animation onRollOver and an animation on RollOut but onRelease the animation enlarge itselfs but now when I'll roll out when the animation isn't open (so i didn't release) the animation plays the animation for the minimizing of the animation. Here's my code (I know its a bit amateuristic but I'm not a programmer )
[Code]....
I have a 30 second long animation (18fps). Movie symbol 135 frames long which loop 4 times using countTextField/if/else etc. and then gotoAndStop on a static frame. According to the company that are posting it on their site, the animation doesn't stop.
Are there any other ways of completely stopping an animation?
I have an swf loaded into my main swf. So far I can get a button in the loaded swf, to link to a frame in my main swf. However, how can I let my main swf know when the loaded swf has finished playing?Here is my code so far:
Code:
stop();
var imageRequest:URLRequest = new URLRequest("dylanTalking1.swf");
var imageLoader:Loader = new Loader();
[code]....
But it does not seem to work.
I'm just wondering if there is an event for MovieClips that tells when the MovieClip's animation has finished playing. Basically, I have an explosion movie clip that I put on the stage. I want to have it animate once through it's loop, then remove itself.
View 1 RepliesI've got all of my ActionScript 3 in a document class file. I want to stop a child movieclip when the animation has finished.
How do I add a listener for that and trigger some code on the last frame of the child MC?
How do I scale and move a finished animation (with more than one simbols - do I have to group them or something since I don't wan't to touch the background?) without having to do it on every keyframe?
View 5 RepliesI have attached a fla file where I am trying to fire an event when an animation of a car has finished.
View 1 RepliesI created a little news viewer, that when you roll over a button it plays an animation. The problem I am having is:if the mouse moves over the button (the animation starts)
then if the mouse moves off the button and then back over the button before the animation is over the animation snaps back to the first frame.Is there a way to tell flash to ignore this Double rollover until the animation is finished?
I'm trying to make a script that will disable leftarrow till the animation is finished. I made a crude attempt myself but it doesn't work :/.
[AS]import mx.transitions.Tween;
allowChanging = true;
if (allowChanging == true) {
[Code].....
I've got all of my ActionScript 3 in a document class file. I want to stop a child movieclip when the animation has finished.
How do I add a listener for that and trigger some code on the last frame of the child MC?
I am looking to create the appearance of a shape being drawn. I need a few shapes, but for the example think of a simple U. I have tried several different approaches. First, I tried a shape tween at 45 degree increments. That was a wrong approach. Then I tried using After Effects, but the movies lacked flexibility and were laggy. Currently I am building the shapes using two shape tween MCs(an arc that goes 11.25 degrees and a line that goes 21px), and repeating it.
This seems to be working, but is very tedious, and lacks flexibility. i.e. if I decided I want the shape just a bit shorter I have to remove the MC incident from every frame. Also I have no possiblity of changing the speed without completely rebuilding the shape becasue I'm doing a frame by frame animation.
I have an intro animation inside of a MC on frame 1 of my timeline, when it's finished playing the 100 frame animation I want it to jump to frame two of my main timeline.I've tried root and parent scripts at the last frame of the animation but it's not working. Do I need to add root to the package?Even gotoAndPlay isn't working
View 1 RepliesI'm having some difficulties on checking when an animation in a movieclip is finished. It's not a tween, otherwise I could make a tween handler with the "onMotionFinished"-property. My situation is different.My movieclip has 60 frames with each frame containing a 3D image. These 60 frames make the impression that a die is rotated in 3D.How do I check in the actions of my scene (root) when the animation is finished?
I already tried making an interval that constantly polls if a variable "finished" is set to true (which the movieclip sets to true on its last frame).This solution isn't really accurate enough due to the interval number.Setting the interval to 1 millisecond won't do any good either.Is there a listener object or something else that makes this possible?On my last frame of the movieclip is a stop() statement which might be polled by a listener?
I have linked a button to another scene, in whic the second scene automatically plays some animation. I want to create a button on this new scene, after the animation has finished, which reverses the animation and then automatically goes back to the original scene. I have this code:
[Code]...
I am trying to get an equalizer animation to redirect to a url AFTER the called on MP3 track has finished playing. But I am pulling my hair out in trying to figure out how to do this... Based on some help and more research, I think i need this following action script inserted somewhere into the original action script, but i'm not sure. Am I even on the right track?
[Code]....
ok lets say you create a button that when held down play an animation of 20 frames if realsed it goes to frame one and stops if held down it plays out this animation. for the topic lets say you have a fire animation and you want the fire to apear and if the user hold its down the animation reaches the end of the time line and loops back and plays the last 5 frames of the animation and as soon as it is let go it goes to and stops at frame one. Well i know how to make a button that when held down plays out an animation. And i know how to say when released goes to and stops at frame one. What i dont know how to do is to loop the fire at the last 5 or 6 frames so the user can hold it down all day long and play out that animation.
View 1 RepliesOk when you press link one it olads great! when i press link 2, it plays the closing animation, but not the entire animation, thats the problem.My closing animation is a red square going from one end to another ( for the hell of it).But you see content number two will load b4 the red square gets all the way across!!
View 2 RepliesNow I have 2 movieclip. Mc1 & mc2. I planned to to make mc2 do certain animation and user must input the key within the progress animation of the mc2 in order prevent something happen
View 1 Repliesso I have a looping animation that is several frames long. Inside the animation is a button, when pressed I want to go to another part of the timeline, where another animation is waiting. Simple, I got that working no problem. But... I need the first animation to go to the last frame in the loop before starting the next animation. The way I have it now makes an ugly cut, and the transition between animations isn't seamless.
[Code]...
I made an animation in Flash which I want to embed in Flex using SWFloader.
I've imported the tweener class (caurina.transitions.*) to tween a rotation. The animation runs perfectly in Flash.
However, when I embed the animation in Flex, the tweening is gone.
Do I need to import the tweener class in Flex?
I use Flash Player 10 (latest version), Flash CS4 Professional version 10.0.02, IE8 and Flex Builder 3.
i want to skip animation for second third etc.. load, for 15 minutes...I have flash file in AS3, but I find only code for AS2:
Code:
stop();
var today = new Date();
[code]........
I have created two buttons (Button1 and Button2). When you click Button1, an animation pops up. You click on the animation to close it - that works fine. If I then click on Button1 again to replay the animation, the animation does not show. If I click on Button2 THEN go back to click on Button1, the animation plays. Why can I not click that same button twice in a row? What am I doing wrong?
View 2 Repliesim trying to do is have a button that shows an animation (created by a duplicateMovieClip function) with onRollOver and stops the animation with onRollOut. It works when i roll over and it stops when i roll out, but then it continues in a loop up to the point where i rolled out (instead of cutting off completely as i would like). Id be extremely grateful if you could tell me where im going wrong.
View 2 RepliesI have a series of animation 8 in total.I want to no how to play one animation, have a delay for 5 sec, and unload that swf, and then play the next.swf with the same delay, this is repeated for the other animations.I just cant work this out as i am new to actionsript 3.0. [code]This allows me to load 1.swf,and that it.This task was easy in actionscript2.0.All example i have found online, use buttons to load/unload swf.I need an example without buttons. I just want to load a swf, have a delay then play the other swf, in a loop
View 2 RepliesI was able to create an animation which only runs when I place my cursor over the animation box.The animation stops playing when I remove the cursor off the animation box.I was able to do this using button rollovers.How do I apply a URL link to this animation.When I place my curser over the animation box it plays,and when I click on the animation box I would like it to link to a web page.
View 1 RepliesOn a horizontal bar, text scrolls from left to right, continuously. The text is a fixed string of city names, and I've made it so that it loops nicely. This horizontal bar with scrolling text is part of a vertical animation, scrolling the bar in and out of view. The vertical tween starts after two seconds. When the vertical tween starts, the horizontal animation has started as well. At the beginning and end of the vertical tween, the horizontal tween starts over. I want it to continu.
View 1 RepliesI have an 2 animations that I need to syncronize. The first animation is a projector screen entering stage, the second is few text layers and images. I timed the second animation 2.2 sec after the screen animation starts (using timer event) and it worked. When I tested it in other computers and on the internet the screen movment was much slower so the second animation entered the stage too fast.
I want to order the second animation to enter only when the projector screen reach it's destination on stage. The screen animations has 2 parts, in animation and out animation connected by a stop(); commend in the middle.
I'm using Flash CS4 and I'm trying to create what I think is pretty simple. I have a tree that will have leaves. I want the individual leaves to fall on mouseover. When the animation is complete, I want the leaves to stay where they land and not reset back up on the tree. I know how to tween and animate the leaves, but everything else is really falling apart for me. I feel like this should be pretty simple. I've created the tree and leaves in illustrator and am importing the .ai file into flash and turning each of the leaves into a bitmap (as opposed to a movie file)
View 2 Replies
