ActionScript 3.0 :: Click On Button1 To Replay Animation / Animation Does Not Show
Oct 19, 2009
I have created two buttons (Button1 and Button2). When you click Button1, an animation pops up. You click on the animation to close it - that works fine. If I then click on Button1 again to replay the animation, the animation does not show. If I click on Button2 THEN go back to click on Button1, the animation plays. Why can I not click that same button twice in a row? What am I doing wrong?
View 2 Replies
Similar Posts:
Aug 13, 2009
I made an animation in Flash which I want to embed in Flex using SWFloader.
I've imported the tweener class (caurina.transitions.*) to tween a rotation. The animation runs perfectly in Flash.
However, when I embed the animation in Flex, the tweening is gone.
Do I need to import the tweener class in Flex?
I use Flash Player 10 (latest version), Flash CS4 Professional version 10.0.02, IE8 and Flex Builder 3.
View 2 Replies
Jun 16, 2006
im trying to do is have a button that shows an animation (created by a duplicateMovieClip function) with onRollOver and stops the animation with onRollOut. It works when i roll over and it stops when i roll out, but then it continues in a loop up to the point where i rolled out (instead of cutting off completely as i would like). Id be extremely grateful if you could tell me where im going wrong.
View 2 Replies
Jun 19, 2004
I have a movieclip that shows an animation onRollOver and an animation on RollOut but onRelease the animation enlarge itselfs but now when I'll roll out when the animation isn't open (so i didn't release) the animation plays the animation for the minimizing of the animation. Here's my code (I know its a bit amateuristic but I'm not a programmer )
[Code]....
View 4 Replies
Sep 11, 2010
I created a movieclip animation that only activates when i rollover the movieclip button. I further extended the frames and created another frame animation that i active only when user clicks the button. So i have a roll over/out animation and click animation in the same movieclip in the same layer. Now the problem is that when i click on the button, its supposed to take me to another page, and it does, unfortunately without the click animation. That means after i click on the button its supposed to first finish the click animation and then go to another page. But when i click, it takes me to another page without showing the click animation
SO I tried the If function, but i seem to make a mistake somewhere and i dont know what to do. Now there is no error in script, but onw there is a problem in link, the button finishes the click animation but it does not go to the tarrgeted"about" frame. here's the code
[Code]...
View 1 Replies
May 25, 2011
I have flash animation on my web site, in all other browsers except IE shows. Header is same size as object.
<div id="header">
<object style="width: 760px; height: 128px; margin-top: 3px" codebase="[URL]">
<param name="movie" value="[URL]" />
<embed src="[URL]" quality="high" width="760" height="128" name="myMovieName" type="application/x-shockwave-flash" pluginpage="[URL]">
</embed></object></div>
View 1 Replies
Jan 9, 2009
I'm looking for a SWF animation, something I could place on my webpage and input images via an admin section.So I would put the SWF in place, and then he would feed himself via an XML file I would do (or something like this) that I would construct with a PHP script from a MySQL database. The script would take randomly images from the DB.All I want is the SWF, I can organize myself with the XML/PHP/MySQL thing.
The animation (the SWF) has to be extensible, I mean, I want to specify the width and height of the animation and I want it to scroll from right to left continuously, at an average speed. This implies that the animation could be, let's say 900 pixels wide, there could be numerous images at the same time scrolling from right to left, all images would have to keep aspect ratio (the maximum height specified).
View 1 Replies
May 11, 2010
" I have 3 different video in (layer "content) each video in different frame(Video1 in frame 1),(video2 in frame10),(video 3 in frame 20) ..Also, i have 3 different buttons in "buttons layer" ( button1, when click, it play video1) (button2, when click, it play video2), (button3, when click, it play video3)...what i need when i click button1 and play video1 all the buttons should be hidden... when the video finish playing it should be appear again... same thing for button2 when i click it and play video2 all the buttons will be hidden until the video finish playing .this is my code
Code: Select allvideo_button1.addEventListener(MouseEvent.CLICK,clickListener1);
function clickListener1(event:MouseEvent):void {
[code].............
View 2 Replies
Aug 7, 2009
I'm trying to create a slide show type animation, the slide will advance every 20 sec. here is my code:
var timelinePause:Timer = new Timer(20000, 1);
timelinePause.addEventListener(TimerEvent.TIMER, timerHandler);
timelinePause.start();
function timerHandler(evt:Object):void {
this.overlay_mc.nextFrame();
}
My question is; How can I get this timer to reset and run again after the nextFrame() has triggered.
View 2 Replies
Aug 10, 2004
I have sum photos which I suppose to create a flash animation to show those photos but I'm not good in flash and have no idea what to create... As I have quite alot of photos, so I cant use frames onli. Give mi sum suggestions or any free example tat I can download?
(PS. It must be auto-play without user to click anything or to mouseover)
I'm using flash mx 2004 and sorry if I put in the wrong forum....
View 1 Replies
Mar 19, 2004
On a flash time line we've got this movie, it plays and then on the last frame there is action script to stop it. (prevent loopage) However, after the movie stops there are a couple of movie clips that loop forever, one of which is a spinning navigation. The navigation spins and spins for eternity, until you mouse over it. When you mouse over it it stops spinning. Theoretically you can then click on the button, which will lead to the page, that you want to go to.Now, making the buttons lead to the page, that's not a problem. The problem is, that before I want it to jump to another page, I want there to be a....how do we see...entrance animation to play.So like, if you click on blue page, a blue square will fade in on top of the button you just pressed, it will grow larger and cover the page, then bam, new page loads (new page would be designed in blue, thus you get the idea?). I know how to use a button to load movie, to make a complete flash site, but I'm not doing that, I want the pages it jumps to to be in html. But I know about doing that too.
What I don't know how to do is, make the entrance animation show up where the button currently is. Because the navigation is spinning and because it pauses on mouse over, the buttons are never in the same place. I know the loadmovie command can load a movie on top of this one, but it generally just throws it up there, or you can specify a point, but how can you specify that it load starting where the button is?
View 2 Replies
Dec 6, 2011
ok lets say you create a button that when held down play an animation of 20 frames if realsed it goes to frame one and stops if held down it plays out this animation. for the topic lets say you have a fire animation and you want the fire to apear and if the user hold its down the animation reaches the end of the time line and loops back and plays the last 5 frames of the animation and as soon as it is let go it goes to and stops at frame one. Well i know how to make a button that when held down plays out an animation. And i know how to say when released goes to and stops at frame one. What i dont know how to do is to loop the fire at the last 5 or 6 frames so the user can hold it down all day long and play out that animation.
View 1 Replies
Jan 3, 2003
Ok when you press link one it olads great! when i press link 2, it plays the closing animation, but not the entire animation, thats the problem.My closing animation is a red square going from one end to another ( for the hell of it).But you see content number two will load b4 the red square gets all the way across!!
View 2 Replies
Mar 29, 2009
Now I have 2 movieclip. Mc1 & mc2. I planned to to make mc2 do certain animation and user must input the key within the progress animation of the mc2 in order prevent something happen
View 1 Replies
Nov 4, 2003
so I have a looping animation that is several frames long. Inside the animation is a button, when pressed I want to go to another part of the timeline, where another animation is waiting. Simple, I got that working no problem. But... I need the first animation to go to the last frame in the loop before starting the next animation. The way I have it now makes an ugly cut, and the transition between animations isn't seamless.
[Code]...
View 4 Replies
Aug 13, 2009
I am looking for real simple scripting - I have a 15-25 frame flash tweened animation and all I would like to do is run thru the animation once then on mouse click go to frame one and start again. And of course I am under a time crunch and completely fogged with actionscript 3.0. I did some basic projects back in the director days and thought I could just pick up where I left off. If I remember right it was simple scripting like
gotoFrame
and
pause
etc...
View 3 Replies
Aug 22, 2006
I got my animation ready, now I just want to export it as Flash movie, and make it play on click. How do I do this?
View 2 Replies
Jul 13, 2009
Alright so I have 5 buttons going across a page, and when i click on one, I want an animation to play that leads into the next page. I want this same animation to play whenever I click any of the buttons, but after the animation is done, I need the movie to go to different URLs.Basically I need code for a button to play an animation, then go to a URL after the movie clip has finished playing.
View 1 Replies
Jan 15, 2012
I have a certain set of motion twains that I've successfuly completed, they constantly loop right now (default), and is saved in the SWF file.I'd like to take that finished looping animation, and insert it within another animation (a) that can be played with a play button, and stopped/resetted with a stop button.How do I insert the completed looping animation into the main animation? And is there something special I have to do in the actionscript of the start and stop buttons so that the "inner" looping animation will start and stop with the "outer" main animation?
View 1 Replies
Feb 3, 2009
i want to skip animation for second third etc.. load, for 15 minutes...I have flash file in AS3, but I find only code for AS2:
Code:
stop();
var today = new Date();
[code]........
View 0 Replies
Nov 8, 2010
I have created a web application which records users video from webcam and stores.Once the user recorded his video he can previwe it.All the functionalities works good in local but not in internet.In internet when i preview the video it takes long time to play.some times it stops in the middle.Is there any way to play the video smpoothly or show a loading animation when it buffers.
View 1 Replies
Apr 27, 2009
i have a over and out animation but i only want to play the out animation when the over animation has completely finished and the same with out animation. i have this code
[Code]...
View 2 Replies
Nov 1, 2009
I was able to create an animation which only runs when I place my cursor over the animation box.The animation stops playing when I remove the cursor off the animation box.I was able to do this using button rollovers.How do I apply a URL link to this animation.When I place my curser over the animation box it plays,and when I click on the animation box I would like it to link to a web page.
View 1 Replies
Nov 4, 2010
On a horizontal bar, text scrolls from left to right, continuously. The text is a fixed string of city names, and I've made it so that it loops nicely. This horizontal bar with scrolling text is part of a vertical animation, scrolling the bar in and out of view. The vertical tween starts after two seconds. When the vertical tween starts, the horizontal animation has started as well. At the beginning and end of the vertical tween, the horizontal tween starts over. I want it to continu.
View 1 Replies
Aug 10, 2011
I have an 2 animations that I need to syncronize. The first animation is a projector screen entering stage, the second is few text layers and images. I timed the second animation 2.2 sec after the screen animation starts (using timer event) and it worked. When I tested it in other computers and on the internet the screen movment was much slower so the second animation entered the stage too fast.
I want to order the second animation to enter only when the projector screen reach it's destination on stage. The screen animations has 2 parts, in animation and out animation connected by a stop(); commend in the middle.
View 4 Replies
Mar 28, 2010
I've got a flash animation attached which I added a layer to and follow the post at [URL] to try and make it go to a url when the layer is clicked.
You can see the animation at [URL] but when it is clicked on, instead of going to the site I specify [URL] it goes to [URL]
I'm nearly at the end of my tether here - have tried it in flash cs3 trial with a number of tutorials online,. and I also just bought Koolmoves, tried it as well but it does exactly the same this. I've set Flash 8 export and network access in publish options
View 3 Replies
Sep 25, 2008
I built an animation with actionscript 3 that I want to use as a welcome page for a website.I put the animation in DW cs3 and it works but i don't know how to make it "clickable" to link it to my website's index!
View 8 Replies
Dec 28, 2009
I am trying to make a class that plays an animation from code when the user clicks on a MovieClip.I copied the animation from the time line using "Copy motion as actionscript3", and made a class that plays it. However, when I try to add the mouse click functionality I run into problems:
1. If there are several instances of the class on the stage, clicking on one instance plays the animation on that instance, as expected. But if I then click on the other instance the animation plays on both clips.2. Repeatedly clicking on the same instance results in the animation eventually only playing partially, as if the animation got terminated early. This is the case even when I wait until the animation finishes before clicking again.I suspect that this behaviour is caused by AnimationFactory.addTarget getting called repeatedly.
Code:
package { import flash.display.MovieClip; import fl.motion.AnimatorFactory; import fl.motion.MotionBase; import flash.filters.*; import flash.geom.Point; import flash.events.MouseEvent; public class Square extends MovieClip { public function Square():void { addEventListener(MouseEvent.CLICK, playAnimation); } public function playAnimation(e:MouseEvent):void {
[code]....
View 1 Replies
Jan 21, 2012
i am developing a simple game "finding the object"
i want to play the animation once i click the object
View 3 Replies
Jun 29, 2009
I have a swf file "home" that has a series of animations that are button controled.I want part of the animation to be skipped when I click one specific button, for instance.Most of the time I want frame label:"1 out" to play all the way through to the last frame (20) and on frame (20) there is an action sending it back to frame 1and stopping, but I need to have a button that when hit plays frame label 1: "1 out" and continues to frame (19) and does not utilize the action on frame (20) sending it back to frame (1), or in other words playing through "1 out" and then playing "2 out" which occurs on frame 21 without returning to frame (1).
View 6 Replies
