ActionScript 3.0 :: Timed The Second Animation After The Screen Animation Starts
Aug 10, 2011
I have an 2 animations that I need to syncronize. The first animation is a projector screen entering stage, the second is few text layers and images. I timed the second animation 2.2 sec after the screen animation starts (using timer event) and it worked. When I tested it in other computers and on the internet the screen movment was much slower so the second animation entered the stage too fast.
I want to order the second animation to enter only when the projector screen reach it's destination on stage. The screen animations has 2 parts, in animation and out animation connected by a stop(); commend in the middle.
View 4 Replies
Similar Posts:
Jan 24, 2012
Okay, now things are getting a little complicated. I need to build a Flash object that can sit over the corner of an image to serve extra content. It's way beyond my Flash skill level, my work is usually limited to print work in Photoshop and Illustrator so please excuse me if any of the following isn't clear. I am trying to learn though, So this is how it's all supposed to work, along with my issues; When the image & Flash item load a small looping animation will play to draw the eye/show the item as interactive.
When the user rolls over this the corner will peelback. I have a working peelback animation for the rollover, that reacts to mouse over/mouse off, and a looping animation for the initial, but I cannot work out how to make the initial loop until mouseover, then play the peelback when the mouse is over. And go back to the initial animation loop if the user rolls off. (Each of these animations is stored as a movie clip in the Library)
Then it gets more complicated... if the user stays on the corner until it is fully peeled back I need to make a small countdown (sort of a 3, 2, 1 situation) show, before launching a lightbox (would this have to be jQuery, or could it be done in Flash?) in the browser to serve the content.
[Code]...
View 1 Replies
Jun 19, 2004
I have a movieclip that shows an animation onRollOver and an animation on RollOut but onRelease the animation enlarge itselfs but now when I'll roll out when the animation isn't open (so i didn't release) the animation plays the animation for the minimizing of the animation. Here's my code (I know its a bit amateuristic but I'm not a programmer )
[Code]....
View 4 Replies
May 19, 2009
I was wondering if anyone knew how I would go about making the following animation (just an example) start after the mouse has been inactive for, say, 20secs.
Code: Select allimport gs.TweenMax;
TweenMax.to(mc, 1, {blurFilter:{blurX:5, blurY:5}});
View 3 Replies
Nov 3, 2011
So what am i trying to do is when text in textfield is lets say 95 it starts an animation that is in library.dont know how to startby the way text in the text field decrases by 1.so when it gets to 95 it starts the animation
View 1 Replies
Mar 12, 2010
I'm creating a thermometer with the mercury animated as donations come in. I haven't touched flash in a long time, so be gentle. How can I change the code below so the animation is faster without increasing the framerate?
ActionScript Code:
var maxMercuryHeight = 192; // Mercury height at 100%
var currentDonations = 80; // Percentage of donations taken
var currentHeight = (currentDonations / 100) * maxMercuryHeight;
[code]....
How can I make the animation ease out so it starts fast and slows down at the end?
View 1 Replies
Feb 8, 2011
I am using the video component with AS3. I have an external flv which loads nicely...that's fine. Now I am looking for a way to remove a preloader animation once the video starts streaming. The preloader is just an animation without a status (percent) bar. In plain English the code would be: if flv file is streaming, fade preloader animation I am also noticing that the first frame of the video shows while it's loading...is there a way to change it so that nothing is seen until streaming? If worst comes to worst I can always make a mask.
View 1 Replies
Feb 25, 2012
I installed Adobe Flash CS5.5 a couple of days back...Trying to learn a few basic tricks such as motion tween (messed up things with the bone tool though)..Well the problem is, a friend of mine made a 3D drawing in Solid Works(a modelling software). It is a sort of box, now he wants me to make a flash animation for the box which starts from a sheet of paper and folds into a box and then the camera zooms out.
Now i have no idea how to do that..jpg file can be made and imported to flash...but as it will be an imported file how can it be manipulated to achieve the final task....taking screen shots of the box at various stages of solid works can be done and then played all together in flash baut it would be very tiresome and time consuming...
I dont want anyone to make it for me just guide me what tools and tutorials to look at.
View 4 Replies
Feb 3, 2009
I need to set a mouse-controlled scrolling animation to ease when it starts and when it stops in AS2. Here's my current onEnterFrame script. Might be a little crude, but it succeeds in starting and stopping the animation when the mouse rolls off the movie. Moves left on one side and right on the other. I just want the starting and stopping to be eased a bit.
[Code]....
View 3 Replies
Oct 19, 2005
What I'm wanting to do for my web site is do a animation on a button so that when the mouse cursor is over it a drop down list animation starts revealing more buttons. How would I go about doing this using Action script in the noobiest terms possible?
View 4 Replies
Nov 24, 2008
I'm trying to make my platform game character shoot a gun, my character and gun are one movieclip and the bullet is another. The bullet mc starts on a blank frame with a stop() function, when I press the space bar the bullet mc plays from frame 2 which is a motion tween of the bullet quickly moving across the page. I've set the bullet's y and x values relative to the character mc so that the bullet always comes from the gun.
My issue is that if I press the space bar a bullet will fly out of the gun (great!) but if I press the space bar again, the first bullet disappears and the bullet animation starts again. I want to be able to shoot a new bullet every time I press the space bar without effecting the bullets that have already been shot.
[Code]....
View 3 Replies
Mar 15, 2010
I have a scroll box I made that is the width of the browser. When I click to go full screen the scrolling (TweenLite) becomes choppy. It is smooth in both browsers in regular mode but when I try it full screen it is choppy in FF but still smooth in IE7.
View 1 Replies
Jul 1, 2009
I'm using screen captrue software (camtasia studio 6) to capture a video of my flash animation. But when I capture it, the aniamtion is jerky. My flash animation is set to 30fps and looks great when played, but not when I play back the captured movie.
I have experimented with a few other codecs, including the Techsmith default, cinepak and microsoft video but they are all the same.
Could someone recommend to me a good codec to use that will capture my animation better?
View 2 Replies
Jun 3, 2009
URL...I really like the style and I think it's Flash but not sure.How do they get the whole animation to fit the whole screen without a users horizontal scrollbar coming in? Is this something you can set in Dreamweaver when you upload it?
View 5 Replies
Dec 6, 2011
ok lets say you create a button that when held down play an animation of 20 frames if realsed it goes to frame one and stops if held down it plays out this animation. for the topic lets say you have a fire animation and you want the fire to apear and if the user hold its down the animation reaches the end of the time line and loops back and plays the last 5 frames of the animation and as soon as it is let go it goes to and stops at frame one. Well i know how to make a button that when held down plays out an animation. And i know how to say when released goes to and stops at frame one. What i dont know how to do is to loop the fire at the last 5 or 6 frames so the user can hold it down all day long and play out that animation.
View 1 Replies
Jan 3, 2003
Ok when you press link one it olads great! when i press link 2, it plays the closing animation, but not the entire animation, thats the problem.My closing animation is a red square going from one end to another ( for the hell of it).But you see content number two will load b4 the red square gets all the way across!!
View 2 Replies
Mar 29, 2009
Now I have 2 movieclip. Mc1 & mc2. I planned to to make mc2 do certain animation and user must input the key within the progress animation of the mc2 in order prevent something happen
View 1 Replies
Nov 4, 2003
so I have a looping animation that is several frames long. Inside the animation is a button, when pressed I want to go to another part of the timeline, where another animation is waiting. Simple, I got that working no problem. But... I need the first animation to go to the last frame in the loop before starting the next animation. The way I have it now makes an ugly cut, and the transition between animations isn't seamless.
[Code]...
View 4 Replies
Aug 13, 2009
I made an animation in Flash which I want to embed in Flex using SWFloader.
I've imported the tweener class (caurina.transitions.*) to tween a rotation. The animation runs perfectly in Flash.
However, when I embed the animation in Flex, the tweening is gone.
Do I need to import the tweener class in Flex?
I use Flash Player 10 (latest version), Flash CS4 Professional version 10.0.02, IE8 and Flex Builder 3.
View 2 Replies
Jan 15, 2012
I have a certain set of motion twains that I've successfuly completed, they constantly loop right now (default), and is saved in the SWF file.I'd like to take that finished looping animation, and insert it within another animation (a) that can be played with a play button, and stopped/resetted with a stop button.How do I insert the completed looping animation into the main animation? And is there something special I have to do in the actionscript of the start and stop buttons so that the "inner" looping animation will start and stop with the "outer" main animation?
View 1 Replies
Feb 3, 2009
i want to skip animation for second third etc.. load, for 15 minutes...I have flash file in AS3, but I find only code for AS2:
Code:
stop();
var today = new Date();
[code]........
View 0 Replies
Oct 19, 2009
I have created two buttons (Button1 and Button2). When you click Button1, an animation pops up. You click on the animation to close it - that works fine. If I then click on Button1 again to replay the animation, the animation does not show. If I click on Button2 THEN go back to click on Button1, the animation plays. Why can I not click that same button twice in a row? What am I doing wrong?
View 2 Replies
Nov 25, 2008
I can't find any proper way to make a long textField move fluently horizontally across the screen in full screen mode. I tried many ways but it always gets stuck from time to time for a few milliseconds and ruins the whole experience.way to best animate a large dynamic string on full screen,If there is a better way then using a textField to have a fluent animation, please tell me and I'll try using a different object for my string.
View 7 Replies
Mar 8, 2010
When I use the play option under "control" menu every thing runs perfectly. When I try to test movie under control menu, play as exported .swf, or debug movie, etc. the animation is stuck at the initial screen.
[CODE]...
View 2 Replies
Aug 27, 2010
I am trying to create animation which is based on user input on speed and distance... also it needs to work consistently on different screens and resolutionwhat functions do i use to get the pixel size of the container where the animation is playing- to make the calculations?
View 1 Replies
Feb 5, 2011
i have a straight, gradient line which extends from one end of the screen to the other.
what is the best (or only) approach for screen wrapping this line graphic, so that it appears to be moving?
my current "solution" is to draw the horizontal line at double the width of the screen and duplicate the gradient pattern for each half of the line. the line is center-registered and it's moved toward the right. once half of the line traverses the stage, the line is reset to it's starting point.
View 2 Replies
Apr 2, 2012
Let me first state that I am no programmer, so this may seem like a stupid question. I have done all kinds of searching on this question, and answers seem far-and-wide, and have only left me more confused. I am currently accepting bids for the development of an Android app version of our graphic novel: [URL] One of the issues/problems from my requirements document that has been raised more than once by bidders is about the Flash animation [URL] that I want to be used in the title screen, and how that will be implemented in the app. The initial programmer that I was working with had real problems with and was never able to get it to work. I know that in order to use the swf file as-is, Flash needs to be installed on the devices, and that is not an Android standard. So I want to know what options there are to be able to include this.
A couple bidders have suggested that the animation be converted to video. And although they claim that they could still make it work correctly, I worry about losing the looping that is built into the animation. Can the animation be converted to or re-created with Java? Should I be looking into using FLash Builder and/or Adobe AIR? We will eventually be porting this app for Apple iPads as well, so if there is an option that woks for both Android and iOS, that would be better.
View 1 Replies
Oct 28, 2010
I'm currently working on a flash header/banner to go at the top of our website.we wanted the banner to expand to the size of whatever window our end users were using. however, I can't seem to figure out how to delete the excess animation that spills over past the designated border.I'm not sure if using the proper terminology.the animation is 1014 x 144. I want it to keep that ratio and I don't want any of the animation that goes beyond those borders to appear.[code]which eliminates the excess spillover animation but I can't reduce it because I made the width 100% and the height 144px in the html.
View 6 Replies
Jun 16, 2006
im trying to do is have a button that shows an animation (created by a duplicateMovieClip function) with onRollOver and stops the animation with onRollOut. It works when i roll over and it stops when i roll out, but then it continues in a loop up to the point where i rolled out (instead of cutting off completely as i would like). Id be extremely grateful if you could tell me where im going wrong.
View 2 Replies
Apr 27, 2009
i have a over and out animation but i only want to play the out animation when the over animation has completely finished and the same with out animation. i have this code
[Code]...
View 2 Replies
