What I have is a draggable container with nested movieClips. So the container uses a MOUSE_DOWN, MOUSE_UP system and the nested movieClips use CLICK. BUT when I start dragging with my mouse on one of the nested movieClips and release after dragging the CLICK also gets fired. This is very annoying. Is there a workaround, or should I set this up different?
View 4 RepliesI have two main clips with clickable clicks within each. I am using swapDepths on the two main clips in a tab navagation fashion. The problem is that if I click on the space between the nested clips in the top clip it actually is hitting the buttons(movieclips) on the other clip under it. Any suggestions?
View 1 RepliesI am creating an flex Air project,so mxml file will run. I have circles in one Big circle at one side and will be same on other side.
Now how to drag any circle from any Big circle to other side. Or it could be like any two container having circles, then how to drag and drop circle?
For one circle i am able to do drag and drop.But I want one Big circle on left hand side and one big circle on right hand side .And small circles with class names will be in these big circles.Now i want to drag and drop those small circles in big circles.Big cicles should not move. Even i have tried this code in actionscript
package
{
import flash.display.Sprite;
import flash.events.MouseEvent;
[Code].....
But in this i want big circles should not move and small circles should only be dragged.
Looking for a way to stop all movieclips both are the stage and that are children of the ones on the stage.
I toyed with looping thru stage's children so I can first target clips on the stage. But I am getting error.
for (var i:int = 0; i < this.numChildren; i++) if (this.getChildAt(i) is MovieClip)
{
this.getChildAt(i).stop
}}
I have a function that states when movieclip1 is dragged and hits a line then it stops the drag, however it seems to stop the entire drag function in the swf on the other movieclips even though they arent called in the function.[code]
View 1 RepliesI want to test mc animations without having to hit F12 to see if they work correctly. For instance, if I have an animation movieclip and then I make another movieclip and drop that aforementioned movieclip within, and animate [via the timeline or library preview] I'm unable to see on-the-fly what my animation looks like... it only shows the top most nest, unless I F12 it.
So if I have a character blinking eyes (one movieclip) and then I create another movie clip of the face, and put that aforementioned movieclip within, the preview animation within the library does not show how it'll be viewed when F12'n it.,,,, it'd be great to see your animations on the fly.
I want to have an image and when I click on the image ,one can hold down the mouse and drag a copy to where ever on the stage and when one lets go, one can drag another and another with each copy still being able to be dragged after released.this is what i have but its pretty simple and doesn't work....
stage.addEventListener(MouseEvent.MOUSE_DOWN,makeA Box);
var i:Number = 1; //i will be the total number of boxes
var newBox:myMC = new myMC();[code]....
I am completely new to ActionScript. I am nesting an SWF in another SWF container to be able to send the clicks from the flash object to the javascript outside. I am able to receive the clicks outside and that part works fine. But the inner content is not scaled to the size of the outer container. I use mxmlc from the 3.5 SDK, without any additional parameters except the actionscript filename, to compile the actionscript to SWF. How can I make the inner content fill up the container?
Here's the ActionScript:
package
{
[code].....
How can I get instance name of the objects nested in container? I use mouse over event to reveal instance name, but it trace only instance number like "instance 122".
ActionScript Code:
// object in container
var nestedObject:Class = new Class();
container.addEventListener(MouseEvent.MOUSE_OVER, showNames);
[Code].....
I have an AS2 .swf being loaded as a child of a parent AS3 .swf. The AS2.swf calls loadmovie() and unloadmovie() to display 3 jpeg files. The images load the first time, but after that, a call to loadmovie() to replace the image, or a call to unloadmovie() fail. I found the following Adobe Bug report ([URL]) that has said this has been resolved, and also said that child movieclips could be replaced without a problem. Here is the code I'm calling.
[Code]....
I want to create a pair of nested mcs with both mcs draggable I want to be able to drag mc1 around the stage and have mc2 move with it. I also want to have mc2 draggable within mc1. I have mc2 inside mc1.I can set event listeners on mc1 successfully but when I add them to mc2 they don't workI tried mc2.addEventListener, mc1.mc2.addEventListener. Neither work. I also tried to have them not nested and assign mc2's .x and .y to mc1's. Here mc2 snaps to mc1 on MOUSE_DOWN but doesn't stay with it when mc1 is dragged.
View 3 RepliesI am having this problem with my movieclips. One is container_mc and inside it is picture_mc. They both have drag and drop functions. Container drags when it is clicked...but when I try to drag and drop picture_mc, I end up dragging the whole container itself. picture_mc is inside container_mc.
View 7 RepliesI need a way to drag and drop an image from a container to another. I have tried a few different ways but I guess the drag & drop thing is still eluding me. Anyway, here's what I am trying to do, A container will contains a few bitmap/vector image (what's the best way for this? Tile Group? Or?) and then I want to be able to drag any of the image onto another larger Image inside of a Panel. Just like dragging shapes in Photoshop. No code here, as I am completely lost on how to go about it. I found a few tip/tutorial here and there but none which I could understand easily or adapt to my need.
Edit 1 : Got so far till now :
public function beginDrag( mouseEvent:MouseEvent ):void
{
[code]....
I created a drag N drop .swf that works great until i pull it into the main movie. The drag works, but not the drop. I know its level's issue/pointing and the targets arent being read correctly by the main..
View 1 RepliesWhen you drag the edge of container with mouse ,how to implement changing the size of container?
View 1 RepliesI have this enter_frame listener to make my Container MovieClip rotate on a 3D environment in relation to the position of the mouse.
PHP Code:
addEventListener( Event.ENTER_FRAME, loop );
private function loop( e:Event ):void
{
var distx:Number = mouseX / stage.stageWidth;
[Code]....
One of the MovieClips I load into that "ctt" container has some scrollable content. I've traced both the CLICK and MOUSE_DOWN events on the Dragger of the scrollbar and it's active, it receives the click and mouse_down events. The problem is that it doesn't drag.
I know that the scrollbar works because if I remove the loop enter_frame event I showed before it works perfectly, it just doesn't rotate on a 3D environment as I wanted it to.
why the dragger doesn't drag when that ENTER_FRAME event like that is being used?
I can usually fumble my way through things *and i usually like to figure things out on my own* I did find a few other threads on this, but the only conclusive thing i came across was the _lockroot = true; which works beautifully.. untill u navigate to the drag and drop portion.
[Code]...
I have a problem creating multiple movieclips inside a container mc. The one created later always overwrited the one created immediately before it and ended up with only the last one left in the container mc. Below is the code:
[Code]...
point in the right direction if there's been a post previously on this, I did a search but didn't find anything. So my problem is that I'm creating objects dynamically and adding them to a movieclip container. I.e. click button -> generate new instance of Item class -> container.addChild(item).
[Code].....
What on earth am I missing?! I've googled and found working examples of that, but it just does not do the trick for me. I'm compiling the project as an Adobe AIR file, but as far as I'm concerned, it should not intervene with the x and y values of the movie clips. I also tried getting the values by methods in the Item class, but with no luck.
How can I check how many movieClips exist in a container and how much space are they taken?
In other words, how can I make this calculation if I have a rectangular movieClip (containerMc) that is 5x1px and five square movieClips (sq1Mc,sq2Mc, sq3Mc, sq4Mc and sq5Mc) that are 1x1px and which can dynamically be placed inside containerMc and I want to know how many and which of these five movieClips already exist in containerMc so I can determine where the next square movieClip needs to be placed?
Can someone be so kind and show me how to do this or direct me where I can find the answer?
I've got a movie clip that consists of a few other movie clips. This is to maintain a certain degree of order in the chaos. I use action script to load the container mc on the stage. Now I want to change some properties of on of the contained mc's, but they seem to be unreachable. So I did a little testing and I found out that when you just place an instance on the stage, those contained MC's are accesable, you can see in the debugger that the container MC contains other stuff. But if the MC is loaded with attachMovie(), the debugger does not show that the container has other mc's within it, and therefor I cannot change the properties of those mc's.
View 1 RepliesIn other words, how can I make this calculation if I have a rectangular movieClip (containerMc) that is 5x1px and five square movieClips (sq1Mc,sq2Mc, sq3Mc, sq4Mc and sq5Mc) that are 1x1px and which can dynamically be placed inside containerMc and I want to know how many and which of these five movieClips already exist in containerMc so I can determine where the next square movieClip needs to be placed?
View 3 RepliesI want to make the kirupa slideshow that loads in movieclips instead of images. This is a huge multimedia project and the movieclips will each have a lot of text and graphics in them. I want it to autoplay AND have manual controls like "back" and "next".
I'm not too familiar with autoplay, except in a timeline. How can I make this work if everything is in a movieclip on the first frame? Do I need to use the timeline or scenes or can it be done with out them?
to clarify... I have 20 buttons at the top. Clicking each one of them will open a different movieclip into an empty mc in the middle of the stage. I have back, next and autoplay buttons at the bottom. I want the user to be able to manually control the movies AND to autoplay.
I created a slideshow of movieclips to auto show not in order. Now I need to create the same slideshow of movieclips but this time in order.
[Code]...
If I have a randomClips function that shows a range of swf files every 15seconds and wanted to create a button that could stop the auto change of the clips, what would be the script for that button if the script for the randomClips looks like this:
Code:
randomClips = new Array("d+l A_news.swf", "maashaven B_news.swf", "maashaven A_news.swf", "gipsy A_news.swf", "gipsy B_news.swf", "d+l B_news.swf", "gw A_news.swf", "gw B_news.swf", "soundscapes A_news.swf", "soundscapes B_news.swf", "fhwsf A_news.swf", "fhwsf B_news.swf");
function randomBackground() {
[Code] .....
I've created a game of top trumps. 64 cards and randomized and the 30 are selected. The 30 are then split between 2 arrays, one called PlayerCards and the other called AICards. Only problem is that the cards don't play in any order and often the same card is played 2-3 times in a row. I want to number the random cards in each the PlayersCards and AIsCards 0-14. How do I number the 15 cards in both the PlayerCards and AICards arrays?
View 1 RepliesI'm building an event calendar as part of a website .The calendar is divided into two sections, "calendar" on the right with the actual calendar displayed, and "calendarContent" on the left, where information about the evnts is supposed to show up. The different frames in "calendarContent" are all labeled. Within "calendar" I have different movieclips for each month, and inside each month I put the buttons that open the event descriptions in "calendarContent."
Now, for some reason it's not working. The function I'm trying is the following:
MovieClip(root).pages.calendarContent.gotoAndStop("artsundays");where "pages" is the name of the parent movieclip that "calendar" and "calendarContent" are both inside, and "artsundays" is the label for the frame in "calendarContent" I want to go to. The function is placed within one of the month movieclips. I get the following error:TypeError: Error #1010: A term is undefined and has no properties.I've also tried usng MovieClip(parent) instead of MovieClip(root).pages (since "pages" is the parent), as well as a few other variations, but the problem remained.
I made a series of nested movieclips, and to stop all motion i wrote this code:
[code]....
This code works fine, but can somebody explain how to write this in a more compact way?
I am having the following issue with this navigation I am building. I am trying to build a 3 tear drop down navigation, where each buttons sub menu is placed inside that button. My buttons are actually just movieclips, so I have nested movieclips structured something like this:
Button_1
-> Button_1_1
-> Button_1_2[code]....
Each one of the buttons has their own class with it's event listenerens inside it. What happens now, is that when I click for example Button_1_2_1, I get it's event, but also, the event for Button_1_2 and Button_1. Initially, I fixed this, by attaching the events to a hitArea inside that movieclip, but now I am running into other issues and was wondering if there was a way to turn this off, so if movieclip for Button_1_2_1 is clicked, I only get the event for that one, not it's parents?
How do you access a nested movieclip? how do you access stuff in mc2_mc or mc2_mc itself from within mc1_mc or maintimeline?
View 2 Replies