ActionScript 3.0 :: Drag Through An Flv Instead Of Play?
Apr 27, 2009
I wonder if there is a way to have an flv which is added with the netstream to the swf to not play. Instead it should be a slider bar that you can drag front and back manually to view the content in the video. The drag bar should be a movie clip that you can drag on a horizontal line which is then connected to the timeline of the flv to view the content in the flv front and back. Is there a tutorial available somewhere or does anyone know how to do this?
I have a file where there is a magnet being dragged horizontal. When the magnet is on the left there is a electrical current flowing down, when it's at the right the current flows up. What I want is to have the two electrial currents play at certain points during the drag.So in the beginning the 1st current plays, which is a separate MC. Then once the user drags the magnet to the right the 2nd current MC begins to play and the 1st one becomes invisible. Then the cycle needs to repeat once the magnet gets dragged back to the left.[code]
I need to be able to drag a selection of buttons with sounds into any 3 boxes (working fine) and then have a play button that plays the three boxes in order depending upon the sound that is in them.
For more clarity;
- a button when pressed plays a sound (works)
- a button when dragged can be dropped in a targetclip (works)
- a button can be dragged out of targetclip (works)
- the target clip needs to know which button is in/on it
- a new "play button" plays the current sounds in the targetclip
How do I make this effect... to Drag a CD image, (about 300x300 pxls) to the right of the stage and at the same time, while dragging, making the cd to flip in position to get inside a CD drive or something? When released inside the drive, a music clip would play. If release outside, go back in initial position.
I'm building a flv_video AS3 player. I'm using steaming-video.The player is working fine, but there is something that I want to improve. Currently when I push play button and if I drag&drop the scrubber of progress-bar somewhere in the area that is still not buffered, the player doesn't start to play from that position. So I want to do it.
i am making a drag and drop jukebox that will play an xml playlist when an icon is dropped onto it's target.i have one xml playlist working, but i need to make a button that will reset all the movie clips to their original position when a playlist has been played.
I want to have an image and when I click on the image ,one can hold down the mouse and drag a copy to where ever on the stage and when one lets go, one can drag another and another with each copy still being able to be dragged after released.this is what i have but its pretty simple and doesn't work....
stage.addEventListener(MouseEvent.MOUSE_DOWN,makeA Box); var i:Number = 1; //i will be the total number of boxes var newBox:myMC = new myMC();[code]....
I have a function that states when movieclip1 is dragged and hits a line then it stops the drag, however it seems to stop the entire drag function in the swf on the other movieclips even though they arent called in the function.[code]
Im trying to do a drag and drop system where the user can drag a movie clip into an area. Although i would like to make it snap to a target instead of just sitting wherever it lands in the area. Problem Two:
The next thing i am trying to do is when the user has a movie clip on a target already, and trys to put another movie clip in that target area, it will replace the one thats in there and go back to its current position. Here is the script of what i have done so far:
I have some movie clips. i want to drag all clips when i drag single movie clip. Ex. I have movie clips "A1", "A2", "A3", "A4", "A5" . Randomly visible some of them. Suppose "A1", "A3", "A4" has visible. When i will drag "A1" movie clip all these "A3", "A4" also move with "A1".
What's the code to start drag and stop drag. I would also like to know what's the code to detect if the object has been dropped on something. I know the code in AS2 but i cant figure it out in AS3.
I am very new to AS3 and I am running into some issues creating a simple class that will allow you to drag and drop and object but then also scale when it is over a hit area. Here is my current code:
i have load in a .swf and this .swf is make up of one drag object. When i load into my _level0, i can drag it but it seem then the drag is not smooth, instead it is lagging. Thus i went back to the indiviual files and try to drag on it and it was not lagging. ...why is it like that? All the files are still on my local disk.
I am creating a Flash website (AS3) which contains multiple columns of swf's. These all have individual "start drag and stop drag" vertically and works fine. My problem is when I try to create start drag stop drag on top of these swf's horizontally - I want to be able to move the whole stage horizontally containing separate columns.
I am not sure how to code it and it ends up locking the "start drag top drag" inside the columns. How can I do this so that each column is scrollable and scroll to other columns without using a scroll bar...
i have an object that i want to drag and drop with the same event.Something like on press start drag and on press again stop drag. I'm sure it's pretty simple with and if and else statment but i can't find how to do that...The best i have done so far was this:
I am trying to make a swf with one FLV playback player and 6 buttons. I've got 6 different videofiles that I want to have linked to this swf. Some of the videos are quit large.When starting the Swf, the first video has to start, after playing it, it has to stop. Then you must be able to choose which video to play by clicking one of the buttons. I don't want to have small thumbnails of the video, just plain and simple buttons.I have to have all my files, both fla, swf and xml files in the same directory (I cannot have them stored in different folders, since I have to upload this to a cms system which has limited upload properties).
I've tried to find the right script on the internet, I'm not very good at scripting myselve, actually rather poor educated there.It seems to me that I have to make an xml file with a list of all my videos, I have my default swf ready, with a FLVplayback and buttons.Now there's just the coding part....
I have created two buttons for separate audio files. Essentially if you click on the button it will play and stop. This works great! I have also injected a SoundMixer.stopAll(); to ensure if you click between both buttons that it will stop the current audio file to play the next one. My problem is when I select the 2nd button for the first time everything seems to be working...it's when I attempt to click on the first button again, that it will require 2 clicks and then it stops and plays accordingly...anyone know how I could eliminate this annoying two click process?
I want a movie clip (let's call it homecontent_MC) with 100 frames play to frame 80 and stop.Then when someone clicks a button on the navigation bar (home, about, services, contact, etc...) homecontent_MC would then begin playing from it's position (frame 80) til it reaches 100, at which point it wouldn't be on screen, and the movie clip that corresponds to the navigation button press (say services_MC...) would start from frame 1 and continue til it stops at it's frame 80...
I got a bunch of live stream from FMLE, say: "FMLE_channel1", "FMLE_channel2", "FMLE_channel3". And then on the server side, I created several corresponding republished stream called "channel1", "channel2", "channel3".
On periodical basis, we call Stream.get("channel1").play("FMLE_channel1", -1, 10, true) every 10 seconds. Similar things were done on the second channel & third channel.Soon after the above Stream.get("channel1").play() call, I should get the following events in sequence:info :NetStream.Unpublish.Successinfo :NetStream.Publish.Startinfo :NetStream.Play.Resetinfo :NetStream.Play.Start In the above case all are happy. Clients can view channel1, channel2, channel3 well.But then after a while, one of the three channels, in most case it would be channel1, will not be viewable.
With the server trace info, I found that after the Stream.get("channel1").play() call, only the following two events exists:
info :NetStream.Unpublish.Successinfo :NetStream.Publish.Starti.e. I was missing the play.reset and play.start event.I further checked and confirmed that the FMLE was publishing all three channels fine to the server. I was able to view the "FMLE_channel1" from flash clients, but not the republished "channel1". the version is FMS 3.5.0.
I play games on Pogo and have never had a problem with their Flash Games until released Daily Hot Shots. It doesn't load fully and I've done EVERYTHING I know to do to get it to play. No errors show up. I can play ALL the other flash games but this one. When I right click, the name of the site's owners do not show up....I have the settings showing though Not all of the game loads and that's the problem. I've tried uninstalling and reinstalling....tried a different browser and have the same exact problem. THIS GAME WILL NOT PLAY.
I have five different scenes all including three different buttons. When I test the buttons in "play scene" - all buttons sounds correctly in all scenes. But when I play movie, there is sound only with one button (the same button in every scene). I have looked for differences, but this button seem to have all the same parameters as the others.
on (press) { // Gives your movie a button functionsgetUrl("http://www.astahost.com");} on (rollOver) {this._alpha=100;gotoAndPlay("Scene 2"); }
[Code]....
when i play the movie, it plays scene 2, however, scene 2, which is in my flash document, plays automatically. how can i stop this? is there some code which only makes scene 2 play when called for and not play automatically.
So i've made my .swf files. The only thing is they all play at full screen when i play them using my web browser. I need them to play at 548 x 408. when i open the .fla and go to properties it says the size IS at 548 x 410 but it can't be if its playing full screen.
I have several products I want to animate with graphics and text individualy then stack them on a time line for output with play and pause buttons. Is there a tutorial somwhere that shows you how to do this? and how do I stop the entire animation on a frame, I don't understand "not_set_yet"
simple one this, or so i thought! basically, i want a mc to play from start to finish (11 frames) upon rollover and upon rollout i want it to play backwards to the first frame. Accurately.
ActionScript Code: on (rollOver) { if (activ.currentFrame <= 11) {
[Code]....
Currently i JUST goes to the next frame. So i need something like currentFrame +1 or something?
