I have a form with the following Text Boxes. I am using Flash CS4 AS3.
1) textModifiedDate
2) textSubject
3) textDescription
4) textStatus
I need to update those fields on daily basis. So, how can I update those fields using xml file?
I have two text fields and the user can use a button to underline text in either field. I have a listener on each field that keeps tracks of the last clicked in field.
public function setLastActiveTextField(event:FocusEvent):void { lastTextActiveField=event.currentTarget; trace(lastTextActiveField.name); }
[Code]....
lastActiveTextField is defined as an Object. When the highlight button is hit, it reports the correct the range, but I can't figure out how to send the formatting to the actual textfield without setting up another if (lastActiveTextField.name==field2) control. Also, stage.focus won't work because the object isn't really on the stage, I guess. There has to be a way to refer to the textField object.
Currently I have a for loop which goes through and draws a really long list of objects. Each object is contained in its own sprite and as it draws them I wanted to have a text box saying "Ojects" + nObjectsTotalLoaded + " of " + nObjectsTotal + " have been Loaded." Right now I am timing out because my loops takes so long, but i figured that if I have a textbox updating as it creates each object that it will also fix my problem with timeout.
View 3 RepliesWhat am I doing wrong here to make the update?[code]...
View 1 RepliesI'm building a simple quiz app. Programing in class, 6 buttons, Q's in xml etc. Everything running fine.
First question loads fine. All buttons with alternatives update fine with info from Xml.Push the right button, gives correct feedback, runs animation and runs "addframescript" code correctly at end of frame.The addFrameScript call's up function to reset button animation and newlevel function. this works just fine, all the buttons update with the new alternatives that correspond with the new question, except for the button 1, which is programed to be the button with the right answer every time. It goes blank. I've traced out the textfield on the button and it says that the textfield contains the correct text. It just goes invisible for some reason
I did test every functions before implementing the "addFrameScript" and everything work fine at that time. newlevel function called inn every text.[code]...
I have created a dynamic textfield, but I doesn't change after the defined number of iterations .At the end of the script is a conditional setting, changing the textField.However, the text just dissapears.
View 1 RepliesI have 2 textfields...They have to be related to each other so when I change the data in one of them, the other changes too (not identically... calculations and stuff) And when I change the second one the, first one has to change accordingly... like a 2-way thing Has that something to do with listeners mby?
View 3 Repliesi have this problem with my text field. i have this dynamic text field, and i want to load external text files and show them there. this all works fine and dandy but when i try to make a scrollbar along with it, it gives the height of the text field as the original one from the flash file, not the new text.
View 8 RepliesI'm trying to update some TextField's style, eg. color, fontSize, fontFamily. I'm creating field by:
var textField:TextField = new TextField();
var style:StyleSheet = new StyleSheet();
style.parseCSS("p{color: #000000; fontFamily: System; fontSize: 20px;}");
textField.styleSheet = style;
[Code]...
I tried something which was very simple in AS2, attaching dynamic movieclip and then attaching dynamic textfield inside that MC, which should update on progress event for loading an image, displaying percentage of loading done. Surprisingly, I have no problem with displaying accurate percentage info, my problem is this: most of the updates of textfield.text writes itself OVER the old text, instead of replacing it. Hehehehehe, LOL! You get it? It behaves like I create new textfield over the old one each time I update text. And I'm sure the code is not recreating textfield or MC, at least I'm positive thats not what I told it to do. So although I'm a bit new to AS3, and may probably doing something wrong, I'm getting more and more suspicious that this is a bug within flash itself, the thing that should not be.
It will be hard for me to recreate the code here, as I tried many different things in the meantime, so I'll just show bits of latest version which doesn't create totally dynamic MC and textfield, but attaches dynamically MC containing textfield which is inside library. The problem remains the same, and I'm sure I compile/upload latest swf version and clean browser cache everytime...Code://btw, timeline is public static MovieClip, which is like root,//and containerMC is public static MovieClip which is attached separately//Also if you see something without being declared as var, be sure its a static property declared in class
//func called after thumbnail button is clicked to open image
public static function prepareImageOpen(imgObj:Object)
{
[code].....
I parse an xml file that his content is:
Code:
<?xml version="1.0" encoding="utf-8"?>
<operators>
<operator><name>OPerator1 </name></operator>
[Code].....
I display the name of operator in a TextField after parsing the xml file my problem is to loop through this different TextField with a fade effect.
how it was put together by making changes.
I have an .fla file where I'm trying to change some of the links. Say it currently goes to index-1.html and I want to change to aboutus.html.
I can't seem to locate where the actual link designation is .. from the documentation on Flash forums it should be in Actions, however I can't seem to find it.
I made changes to the file and attempted to load it into my browser (IE) but it only loads the file from before I made the changes. I published the file and even cleared my cache. I double checked the location and it looks fine.
View 2 RepliesI have updated the flash file on my page.In IE its showing the latest one.But in firefox the previous file only reflecting...Any other plugins for java, flash should I download for firefox?
View 4 RepliesHow can I add new nodes/elements/properties to the existing xml file at runtime in flex. I have a xml file which is used to display components in flex. I want to add/edit component and their properties at runtime.
xml file sample:
<view id="productView" label="Products">
<panel id="chartPanel" type="CHART" ChartType="Pie2D" title="Productwise Sales" x="215" y="80" width="425" height="240" showValues="0" >
< /panel>
< /view>
To add new component I have created an object with all the properties and elements of components. How can I convert this object in xml format and update the existing xml file?
I am deploying Updates via SCUP and SCCM to hundreds of Computers. Fortunately Adobe provides an SCCM Update Catalog for both Adobe Flash ActiveX and Adobe Flash Plugin. But now my Problem: After publishing the Update via SCCM, the client is not supposed to be interfered with the Update Progress (which is working) I figured the Updater works like this: First SCCM checks if a Update needs to be deployed, if this is the case, The Flash Updater begins. First the old Flash Version is beeing uninstalled. But now: if the Client has a Browser Window (IE, or Firefox) open, the Updater is not able to install the new Flash Version and quits with an Error. This leaves the Client PC without any Flash (because its being uninstalled before) How can I prevent Flash being uninstalled due to the Update progress not working while a Browser window is open?
View 1 RepliesI've got a movieclip, which has got a dynamic text element.The movieclip uses a package for its codeThe package if obviously derived from the MovieClip classI've got a timer, that updates the dynamic text field every second.When debugging the code, I see that the timer works well. Its updates the value of the dynamic text field.
View 2 RepliesOK my project uses an xml file called Chart-app.xml inside this XML file there is a tag called <version></version> which I keep in the format like: <version>1.2.128</version> I am wondering if I can set it to append to the third number every time I run my project. So if I ran it now it would be 1.2.129, then if i ran it again it would be 1.2.130
View 2 Repliesi had a flash class file for my movie clip in the stage .i had written all necessary codes in the class file. when i test the movie the class file works fine. But when i updated the class file with new code it doesn't seems to be updated in fact the movie clip runs with the last saved class file.But when i change the class name and file name(to a new name) of the class file the movie clip is updating. So what goes wrong here?? Do i need to change the class name and the file name for each update????
View 1 Repliesi'm trying to create some code which would create instances of arbitrary classes.for example... i'm making a game which will be hosted on a site, and characters i create over time will eventually be selectable for use in game. but instead of uploading an entirely new game whenever i decide to add a new character, i'd prefer to just update an xml file listing the characters, as well as an swf file for each character class.so during actual runtime, i'd have to create instances of these characters.... but i wouldn't necesarily know which character class constructor i'd be creating.... it would depend on who the user selects.if it were up to me, i'd be able to decide what class instance i'd like to make from a string variable (taken from xml).like this maybe...
var classname:String = "CharacterOne()";
var character:Object = new classname;
....instead of having to write: var character:CharacterOne = new CharacterOne();
I did the flash form tutorial here on [URL]
Everyting works fine but if I add a textfield to the flash file and change the php file it still sends the original textfield but not the one I have created. I am using flash 8 and macromedia mx. I just copied the message textfield in flash and dublicted it. Than I gave the dublicated textfield a different instance name (second). After that I published the movie and adjusted the php file. I guess that the mistake is here. Would be cool if you could check the below listed php script and tell me what I am doing wrong. Honestly it's driving me nuts as it looks so simple but it just wont work. I marked the lines I added with red.
<?php
/************************************************** *
* PHP 4.1.0+ version of email script. For more
* information on the mail() function for PHP, see
[Code].....
I found a very useful AIR remote updater [URL] written by Claus Wahlers. It works fine but I have a question which I myself can't figure it out. Just a newbie in flash I guess. Question: What if the script can't find yourapplication.air inside my domain.com host? What will happen? I have tested it out. It appears that the script keep on running to find yourapplication.air inside my server. But it is not there. How do I make a timeout when if there is no such "yourapplication.air" file in the server / it will skip the update process?
[Code]....
I've made two classes, Office.as (main class) and Table.as, that when used allows the user to move the mouse over a symbol, and receive information shown in a TextField on four different MouseEvent's. This setup works well, but I would like to extract the the text function (named TableText) out of the Office.as file, and make it into its own class file. I have done that as TableTextField.as, but I don't know how to implement it, so the Table.as file can use it (as is does now through Office.as)
Office.as file:
ActionScript Code:
package {
import flash.display.*;[code].....
I have an actionscript pulling data from an xml file. As you can see in the code below, I have textFields been created on the fly.I need to have the "resultsField" textfield to be programatically filled with the greater value from either "column1" or "column2".[code]
View 24 RepliesI have a Dynamic Text Field that is calling an external HTML file with no problem at all -- but I need it to call a (.asp) file into this text box from an external server .. What code would I place in the Text Field MC to have it call a URL (.asp) into the box and display?
View 2 RepliesI just did the "Photo Gallery using XML and Flash tutorial" and it works perfect!! Good tutorial!! I'm struggling with one thing though. Instead of loading the comment text from within XML, I want to load a .txt file into a dynamic textfield in Flash with XML. The code in XML I changed to <caption>folder/pic01.txt</caption>. The code in Flash is now:desc_txt.text = description[p]; I'm think that's the other code that needs to change
View 8 RepliesI'm still a beginner with AS3. I am simply trying to load my .htm file into my dynamic text field, but it will not show up. When the movie plays, the cursor shows that there is text where it is supposed to be, but I do not see any text. I don't see an option to attach a file, otherwise I would.
var myFormat:TextFormat = new TextFormat ();
myFormat.size=16;
myFormat.align=TextFormatAlign.CENTER;
var htmlText:URLRequest = new URLRequest ("text.htm");
var loadShit:URLLoader = new URLLoader();
loadShit.load(htmlText);
[Code] .....
I did a test where I was able to load in data to a text field in flash from an xml file. This field will eventually be a scrolling text box. How would I make some of the text in the XML file interactive (meaning you could click on it and cause something to happen in the flash) - for example popping up a graphic on the screen. I don't want it to be an external link (URL) and since the text scrolls, there is no way to know where it will be on the screen when the user clicks on it so I can't create an invisible button.
View 4 RepliesI have an input textfield on my stage. I have created a AS3 Document as the Main Class for my work. Now I need to access the user input in the textfield and work with it in my class.
View 4 RepliesI have an external as file.I was wondering what I put in it to update a textField I have manually drawn on the stage? so what I'd normally put in the timeline is:
myField.text = 'tester';
what would you put in an exteranl as file, and do I need to include:
import flash.display.MovieClip;
import flash.display.Stage;[code]....