ActionScript 3.0 :: MP3 Loading Into Movie With Low Volume
Feb 22, 2010
I have this rather large movie file that I'm working on and unfortunately the mp3s that I'm loading into the movie are all at a very low volume. So I'm using the below code to raise my volume but I'm anticipating on having about 25 instances and I need to create, I believe, either an array or a class that "calls" the idea/objective behind code below.
Code:
var channel:SoundChannel = new SoundChannel();
var volumeControl:SoundTransform = new SoundTransform();
volumeControl.volume = 4;
var audioURL:URLRequest = new URLRequest("Scary Stories To Tell In The Dark/01 The Big Toe George S. Irving.mp3");
var bigToe:Sound = new Sound(audioURL);
channel = bigToe.play();
channel.soundTransform = volumeControl;
View 14 Replies
Similar Posts:
Dec 17, 2009
i have a flex application that loads flash files using SWFLoader. is there a way to control the audio volume in that swf from my flex application ?
View 1 Replies
Oct 6, 2009
does anyone have an example of a simple volume slider that controls the master volume of the entire swf?
View 1 Replies
Nov 21, 2009
I've created a small music player with a sliding volume control. I'm having trouble with the volume. Though it does control volume properly, if I set the initial volume to less than 100%, the volume always starts at 100% until I move my mouse over the player. At that point, the volume changes to whatever the initial volume is set to.Is this a flash bug, or am I missing something? Here is the affected code (code for other buttons/functions omitted for brevity):
var song_initvolume:Number = 100;
slider_1._x = groove_1._x + song_initvolume;
playSong(0,song_play);[code]....
I'd like to be able to set the volume at say 50%, but the above mentioned behavior happens each time.
View 2 Replies
Feb 1, 2010
I'm building a video player and am kinda stuck at the volume slider part. It's a YouTube style vertical slider, meaning if the slider is in the top position volume should be 100% and if the slider is dragged to the bottom position sound should be 0. Currently it's doing the opposite of what I want :(
Dragging the slider down will make the sound louder, while dragging up lowers it.
Here is my code below dealing with the volume slider.
[Code]....
The (-4) is an offset value so when you drag it all the way to turn it off, it's 0 and not 4. I need to reverse this somehow, so the traces above will swap... going down will make userVolume = 4 and going up will make it 30.
View 4 Replies
Jan 22, 2009
I need to control the volume of all sounds in the movie even if they were in the timeline so they do not have an instance name,by AS3.0 code?
View 5 Replies
Oct 25, 2006
Is there any way to manage the volume of a complete movie. I mean, a sentence that applies to all sounds playing and sounds that are not playing yet. I'm trying to manage some sounds that must be inserted on the timeline in stream mode. I must can set all sounds to volume zero without stopping them. They have to keep running. I know that if I call the sounds by actionscript without inserting them on the timeline is easy to do. but this time I just have to use it this way.
View 1 Replies
Aug 3, 2009
I have an mp3 player called "juke.swf" that loads into my root and plays music form an XML file. I have another movie that loads called "scene-3.swf that holds a small gallery of movies". is there any way to make "scene-1.swf" auto-mute or turn down the volume of "juke.swf" when it loads, Then auto turn it back up after I click to another movie?
View 3 Replies
Apr 26, 2011
I have an mp3 player called "juke.swf" that loads into my root and plays music form an XML file. I have another movie that loads called "scene-3.swf that holds a small gallery of movies". is there any way to make "scene-1.swf" auto-mute or turn down the volume of "juke.swf" when it loads, Then auto turn it back up after I click to another movie?
View 3 Replies
Nov 25, 2002
Flash 5: I am making a children's game with tons of different buttons that make different sounds. I would like to make two buttons (up and down, respectively) that control the volume of ALL sounds in the movie, not just one sound. Is there one singel script that I can do that with?
View 3 Replies
Apr 12, 2012
I've got a serious of games which in turn load off a main main swf.I have mute and unmute buttons on the main menu and the same buttons in each game.When I unload/load a game I want the volume to stay as it is so they player doesn't have to keep turning the volume off. AudioOff is the button shown when the volume is off and AudioOn is the button shown when the volume is on.The code I've got now keeps the volume on or off through the games but the buttons aren't showing up correct with this code..
if (SoundVolume.volume == 1)
{
AudioOn.visible = false;[code].....
View 2 Replies
Sep 10, 2011
I converted the slider bar and slider button to buttons. Then, I made the slider button into a movie clip.
Here is the code I placed while slider button was a button:
Code:
on (press) {
startDrag(this, false, left, top, right, bottom);
}
[Code]....
It seems right to me but I don't know. The movie button slides down the slider bar but it just doesn't affect the volume. Going to try to attach my FLA to offer better insight. Just tried to upload it and no matter if it's FLA or zipped FLA, it says it failed.
View 1 Replies
Apr 13, 2003
I have seven loops in total. I imported them into the library. i've put each of them in a seperate movie clip with the names loop1,loop2,.In those movie clips, the first (key)frame contains the action stop(); . The second frame is a keyframe too and from here on the sound starts. And of course they loop.Okay, now the buttons to control the movie (Prev, Stop, Play, Next) work fine, but let me explain the system i used. I used a var loopnumber and everytime you click Next or Prev, it '+'es 1 or '-'es 1. I also set a variable number_to_play = "_root.loop"+loopnumber, so you would get _root.loop--number--, where --number-- is 1,2,3,4,5,6 or 7. To actually play the sound, i used tellTarget(number_to_play) {gotoAndPlay(2)}.That's why i added stop(); to the first frame of those clips.how can i make a volume slider for those sounds inside my movie clips ? I've checked this forum already for questions like this but they don't use the system I use.
View 4 Replies
Jun 9, 2010
What is the script to control the volume of multiple audio tracks embedded within a movie clip?
View 1 Replies
Mar 16, 2004
I'm loading a external swf into a movie everything is fine with that. The only problem is that its loading only a part of it. Does anybody know why? Also, this swf is a mp3 player with streaming. The streaming part works but the playback doesn't.If i start only the mp3 player by itself it's working.here is the fla for the player
View 3 Replies
Aug 4, 2003
i am making a site with transitions that loads external .swf files(exactly like the tutorial). after the first part of the transition plays it uses:
[Code]...
So i guess my questions is should i add the load movie code before this code or what. how do i make this apply to loading the actuall external swf files??
View 5 Replies
Jul 15, 2004
I created a Flash movie (header.swf) that did some animation then at the end, loaded another into it using this command: loadMovie ("scrolling3. swf","_root.dropZone");It loads and plays just fine. Then I created another movie (video2.swf), that loads a movie in the same fashion: loadMovie ("tom2.swf","_root.mcTom");By itself, this movie (video2.swf) runs just fine.But now, when I wanted header.swf to load video2.swf it loads it, but the movie clip tom2.swf does not run. It just shows up as a white square in the corner. What am I doing wrong?I have tried many of the examples from threads that I have read hear and cannot get it to work.
View 1 Replies
Mar 11, 2010
I was wondering about the flexability of loading movies into a movie clip. Currently, I am well able to load one movie into a movie "loader" clip, but thought maybe there is a way to load additional movie clips into that same "loader" clip, as i am starting to accumulate several different graphics that i need to have be inside movie clips so that i can make them change colors on the same frame when needed.
i shot from the hip and tried this code, but didnt have any luck:
mc_LCD_loader.attachMovie("hilight", "g", 1), ("header", "X", 1); mc_LCD_loader.g._x = 0; mc_LCD_loader.g._y = 1000;
mc_LCD_loader.X._x = 0; mc_LCD_loader.X._y = 1000;
[Code]....
View 9 Replies
Feb 25, 2003
My _root movie is nothing more than a interface with navigation buttons. When someone clicks a button another swf is loaded into an empty movie clip on _root.
My Problem:I understand loaders and use them all the time, however, I still to this day have never gotten a loader to work with loading an external movie into a currently playing movie. (ie: in my _root movie you press the "Searching" button and searching.swf is loaded into _root.contents --> contents is the empty movie clip)So anyways... where does the loader go? The only results I've ever had is as SOON as the loadMovie method is called the movie hangs until the entire movie clip is loaded. Then the loader runs... thus making it totally useless.
View 1 Replies
Jul 2, 2006
I would like to set height after I load an external movie into a movie clip.
For example,
this.body_mc.loadMovie("body_about.swf");
_root._height = this.body_mc._height;
I always get height as 0, because body_mc is an empty movieClip.
how to access the body_about.swf height as soon as loaded the movie into the empty movie clip?
View 2 Replies
Apr 15, 2003
I have a button ( 3 buttons ) and each button is assigned to Load a movie. When you click one of the buttons, the LoadMovie on Level 1 is good. Now here is my problem, how will I unload the current movie before Loading the next one. I want to UNLOAD the CURRENT MOVIE first before loading another MOVIE.
View 2 Replies
Jul 5, 2010
I'm loading movies into a container loader BUT when I load in one of my games it runs real slow. Is it because I should have removed other movies first ie: They seem to be all in there and stacked on top of each other.
import flash.net.URLRequest;import flash.display.Loader;import flash.events.Event;
MyButton.addEventListener(MouseEvent.CLICK, this.startLoad);function startLoad(e:MouseEvent){ var mLoader:Loader = new Loader()
[code].....
View 15 Replies
Nov 16, 2011
I have and SWF file I created from a PDF through Print2Flash. I am trying to bring it into another SWF file which is my navigation shell.
I am trying a simple test to load it and it work fine all the way up to when its time to resize. This is AS3 and this is the code I am working on:
[Code]...
This seems to work as long as I dont try to resize the container. repositioning the containg alone the X and Y works....but when I add the resize of the container to 800 x 800, I get nocompiler errors but the SWF doesnt seem to load either. Can someone let me know why this would be the case? I have found other threads concerning this but still the SWF I am bringing in just will not show when I add the width and height resize.
View 11 Replies
Mar 21, 2011
My scenario is that i have host swf that is of as3 and need to load an as2 movie into it.Now I need to control the as2 movie for keeping the host as3 swf and the as2 swf in sync. To do that I am using a local connection. But the problem i'm facing is that, when as2 loaded via as3 movie, I don't see as2 events being fired. For example, I kept a trace in onEnterFrame in as2 movie. Stand-alone I could see the traces. But when loaded from as3 movie, I could not see any of them.
I have 3 movie clips Loader as3 movie AS2 wrapper movie (Generic for all AS2 movies that will have local connection code.this will get msgs from as3 and internally does what ever we wanted) the actual as2 movie to be loaded into as3
View 1 Replies
Apr 30, 2003
I am creating a full site in flash. The main movie has an empty movie clip in the middle of the movie to load external movies as the user clicks on the links. Everything has worked good so far as the linking has only gone 1 level deep. However, when I created a new external movie, and had buttons on it for another external page, but yet to open in the main movie, I can't get anything to work. Example.... In the main movie, the user clicks on the archive link, and the external archive movie is loaded into the main movie. Now, on this archive movie, there is a button on it that links to a another movie (say text effects.swf). However, when they click this button for text effects, I can't get it to load into the main movie clip and replace the archive movie that was currenlty there.
View 14 Replies
Jul 15, 2004
I have a main movie (called: "team.swf") with several buttons. When I click a button, it loads an external movie (called: "lampe.swf") and plays in my main movie. Now, what I want to do is this: when the movie "lampe.swf" is done with playing, it loads another movie (called:" description_ lampe.swf") onto the main movie. So what i do is ad a script to load the "description_lampe.swf", but it opens in the same window.[code]
View 2 Replies
Mar 2, 2002
I have a problem where I have 2 movies on a page (each in their own frame). I want the second movie to start after the first one has finished, but right now they both start at the same time.Is there a way to check if movie1.swf _framesloaded = _totalframes and if true start the next movie?
View 5 Replies
Sep 11, 2009
I have a main movie (called: "team.swf") with several buttons. When I click a button, it loads an external movie (called: "lampe.swf") and plays in my main movie. Now, what I want to do is this: when the movie "lampe.swf" is done with playing, it loads another movie (called:"description_lampe.swf") onto the main movie. So what i do is ad a script to load the "description_lampe.swf", but it opens in the same window... This is my code
Code:
_root.loadMovie("description_lampe.swf", "description");
I guess it has something to do with the "_root"... how can I show to that movie that it has
[code].....
View 1 Replies
Feb 18, 2009
I've been trying to load a movie clip from a movie clip that has been loaded. I am trying to provide a simple means to change the look / feel of the flash application by placing the graphics and controls into a second swf. Each different screen is represented by a different movie clip that is in the second swf. So I've got app.swf loading ui.swf. I want to load screen1_mc from ui.swf.
The app.swf is loaded by a master swf. There may be multiple copies of the app.swf that can be loaded by the master.swf and each app.swf could be configured differently. For each "unique" app.swf it is stored under a unique folder that is not known to me in advance. Since I don't know the unique folder in advance, I can't use import / export for runtime sharing. Is there any way to load the movie clips from the loaded movie clip? (Basically, I want to treat the ui.swf as an extension to the library.)
View 0 Replies
Oct 30, 2009
i have movie clip x (which is blank), and movie clip y, but movie clip is only on the timeline
how do i play movie clip y in movie clip x ??
View 1 Replies