ActionScript 3.0 :: Navigate An Image That Is Larger Than The Stage?
Feb 11, 2010
I would like to have an image much larger than the stage, with little buttons all over it that play a MC when moused over. When the mouse reaches the edge of the screen, I want it to scroll so that the viewer can explore the whole image. In short, its a map with destinations, and on mouse over the destinations play a MC. I'd like the viewer to be able to "explore" the map with the mouse. It seems simple, is there a good way to do it?
Also, once it is done, is there a way to begin with the entire image shown, but then have it tween to its final (Very large) size, without breaking that functionality.
View 3 Replies
Similar Posts:
Dec 13, 2007
Some images I load dynamically are too big so I would like to scale them to fit the stage.
[Code]...
this returns 0. Why does it return 0 when the image loaded is obviously much larger then 0 pixels. How do I change the width and height of imgCont to a specified dimension.
View 1 Replies
Nov 4, 2010
I created a simple mouseover (like this one http:url... )with one small image that grows to a LARGER image directly on top of the smaller image when mouse is OVER the smaller image. When user mouses OVER the smaller image the larger image appears correctly.Problem is that even when user mouses OVER the "boundries" of where the LARGER image WILL appear, that also causes larger image to appear. What I want is for the larger image to appear ONLY when mouse is OVER the smaller image.
View 2 Replies
Jun 16, 2010
I'm coding in actionscript 3 - the functionality is: large image loaded at runtime. The bitmapData is stored and a smaller version is created to display on the available screen area (I may end up just scaling the large image since it is in memory anyway).The user can create a rectangle hotspot on the smaller image (the functionality will be more complex: multiple rects with transparency: example a donut shape with hole, etc)
3 When the user clicks on the hotspot, the rect of the hotspot is mapped to the larger image and a new bitmap "callout" is created, using the larger bitmap data. The reason for this is so the "callout" will be better quality than just scaling up the area of the hotspot.The image below shows where I am at so far- the blue rect is the clicked hotspot. In the upper left is the "callout" - copied from the larger image. I have the aspect ratio right but I am not mapping to the larger image correctly.[code].....
View 2 Replies
Feb 21, 2012
I need the ActionScript (2.0): 1) When rolling over a moving image (like a filmstrip), I want the image to stop and then it zooms into a larger image. 2) Then when you click on the larger image, it goes to another URL page in my webiste.
View 9 Replies
Oct 30, 2011
I have found an excellent tutorial and source file for a 3D image gallery. However I would like to make the thumbnail click thorugh to a url link when pressed rather than loading the image into the gallery.
Currently the images load in through actionscript. Is there a way to amend this script so you can specify that a thumbnail clicked links through to a url, like you would with a normal button instance rather than loading the image. Here is a link to the file and tutorial. The actionscript is on the top layer within the file.[URL]...
View 9 Replies
Oct 30, 2011
I have found an excellent tutorial and source file for a 3D image gallery.However I would like to make the thumbnail click thorugh to a url link when pressed rather than loading the image into the gallery.Currently the images load in through actionscript. Is there a way to amend this script so you can specify that a thumbnail clicked links through to a url, like you would with a normal button instance rather than loading the image.Here is a link to the file and tutorial. The actionscript is on the top layer within the file.URL...
View 9 Replies
May 12, 2010
The more I work with this program, the more weird stuff I encounter. I set up my .fla file as 700 x 400. I've been putting stuff on the stage and adding tweens, then when I test the movie, part of the stage image is cut off. I turned on the ruler, and found that the top of my stage is aligned at X 0.00 and Y -44.50. I drew a box the size of the entire stage, and its position is X 0.00 and Y -44.50, and the dimensions are 700 x 469. Can anyone tell me why my stage is larger than 700 x 400, and how to get the top left corner of the stage to be aligned at X 0.00 and Y 0.00?
View 4 Replies
Nov 15, 2011
Is there any way to make a stage larger than 2880x2880?i'm working on a game,and i want to build a big level,where the player and move and discover,and the current stage size just isnt big enough.The background is not moving just my player,so the level has to be pretty big to explore...
View 2 Replies
Dec 6, 2010
I have a presentation work and the size that i have to work is larger than 2880 pixels which is the maximum value flash cs5 allows. So, is there any way that i can make the stage size larger? (approximately 3900 pixels)
View 2 Replies
Jul 16, 2010
I have assets in external swfs which I load. I would like to know the exact size of the stage and the position of the asset in the fla that created it. If I try to ask the resulting MovieClip for it's size, it turns out it gives me the size when it is trimmed down to the tightest box around the non-transparent pixels. Looking at the contentLoaderInfo, I can get the original width/height that was used by the fla file, which is great. However, I still need to know where to place the asset within the stage.. basically I need an x/y offset for it.
The reason I need this is for a customizable avatar - it has many parts, which are placed in different areas on a stage to create the full avatar. I would like to be able to combine the individual swfs for each part to achieve this.
View 1 Replies
Nov 10, 2010
Is there any way to make a stage larger than 2880x2880??? Normally it is not that much useful but there are times when I want to create a presentation that spans onto multiple monitors. I probably know the answer, but I thought that I'd ask anyways.
View 8 Replies
Aug 24, 2009
I have a small swf file embedded in a div with CSS. When a button is clicked I want there to be some content showing up outside the boundaries of the smaller swf. Is this possible? How might I be able to do this with CSS/HTML/Flash?
View 1 Replies
May 27, 2010
I am working on this image scroller, where thumbnails of images are displayed. I get each image by
function urlLoaded(event:Event):void {
urlLoader.removeEventListener(Event.COMPLETE,urlLoaded);
xml=XML(event.target.data);
[Code]....
So is there anyway I could use any of the above code to load the big image associated with the small image? If event.target points to the current thumbnail being picked up, could i do something like event.target.url to point to its name or something?
View 3 Replies
Mar 4, 2011
We're making a Flash browser game with a few reasonably complex animations. Our designer is making the animations in Flash Professional while I'm wiring everything up and adding some logic through AS3 (using FlashDevelop).In one of our more complex animations a "bonus item" moves around the screen. It tweens hither and tither, there special effects and as such, it disappears for a few frames and then reappears later.From AS3 we want to be able to dynamically decide which bonus item (say a mushroom or a star) to include in the animation. We don't want to have to ask our designer to replicate the entire animation for each of our bonus items.This is what we've tried: Created a two frame (1 mushroom frame, 1 star frame) "BonusItem" movieclip in FlashPro and Exported for ActionScript.Created the complex animation movieclip in FlashPro and added the BonusItem movieclip to the relevant frames. Gave the BonusItem instance an instance name on all necessary KeyFrames. Exported entire movieclip for ActionScript(exported as "ComplexAnimation").[code]This would play the complex animation with the star and we could easily call gotoAndStop("mushroom") to play the same animation with the mushroom.
The first problem was that complexAnimation.bonusItem was null on line 02 above. I solved this by handling ADDED_TO_STAGE for complexAnimation and putting line 02 above in the handler. The next problem was that each time the bonusItem movieclip started tweening, or if it was not present in some frames and was subsequently re-added the complexAnimation.bonusItem attribute/reference was reassigned to a new bonusItem instance. I then had to find a way to know when this was happening and call gotoAndStop("star") on the new instance. I've found two ways to do this:
1) Listen for ADDED events on complexAnimation with a target.name of "bonusItem". It's a bit crap in a strongly typed language to have to resort to matching strings, but this works. Btw, when the ADDED event is fired new frame object references are still null.
2) Listen for FRAME_CREATED events. This happens later than ADDED at a point where new frame references have been initialized. As such I can check if complexAnimation.bonusItem is non-null at then call gotoAndStop("star") on it. One problem with this is that calling gotoAndStop actually triggers another FRAME_CREATED event to fire, so I need to guard against infinite looping. Again, it works but I don't have a great feeling about it.
View 2 Replies
May 6, 2010
I have a project I have to do and have made a large stage because it will be the only setting of the animation:It is supposed to be a talkshow stage. I need to be able to zoom in to the desk and the chair in order to get a close-up of the people as they're talking. Is it possible to simply zoom in the entire image itself or will I have to make a whole nother image?
View 14 Replies
Feb 10, 2012
I set my images at 60% quality JPG files out of photoshop which seems to give a very nice representation. I set up a site to take a full screen, so I expect it to be larger on a bigger screen then what I see on mine. I figured to keep every image actual size at about 25% bigger when the finlal needed size in the layout, so if the site is ever on the bigger screen then images have some stored resolution to be enlarged and accomodate an increase in size. So all of mine images are scaled at about 75%.
Is it a good practise or things don't work this way in Flash? Perhaps it is better to keep the images to 100% (rather than importing intentially enlarges images) but make the maximum quality? Or both ways kind of work out?
View 3 Replies
Nov 24, 2011
i am building a digital portfolio and i have managed to get the thumbnails on a horizontal scrollbar but i want to be able to click on one to load the full image. I dont know where to start though. The code i have so far is:
Code:
package {
import flash.events.*;
import flash.display.*;
import flash.net.URLRequest
[Code].....
View 0 Replies
Mar 29, 2009
I started using AS3. At the moment I'm working on a project with (small) image galleries. When you roll over a small image, there's a larger version showing up, and the thumb changes also. You can also click the image, and then a lightbox effect pops up. To achieve this, I'm using the following script, which works fine:
Code:
img1ro.visible = false;
cl1.visible = false;
btn1.addEventListener(MouseEvent.MOUSE_OVER, over1);
btn1.addEventListener(MouseEvent.MOUSE_OUT, out1);
btn1.addEventListener(MouseEvent.CLICK,lightbox1);
function over1(event:MouseEvent):void {
[Code] .....
But I was wondering if there's an easier way to add images. At the moment, I copy-paste the script, and have to change the numbers according to the number of images. Is it possible to put the images in an array or something like that?
View 3 Replies
Apr 20, 2009
I have flash CS4 and some time ago made a simple movieclip in an older version of flash.I now want to make a simple gallery with thumbnails that show a larger image once you hover over the thumbnail.[URL]I forgot most of the workings in flash, so it's difficult to make what I want.
View 2 Replies
Apr 12, 2009
out how to do this but I just can't find anywhere on the internet that has a guide for what I want, probably because of they way I'm wording what I want to do.and allow the user to navigate around it with their mouse, so you move left it goes left, you go up it goes up, etc. On top of the mouse moving bit I want it so that the black area in the image is never shown, so it's as if you are just looking at the image and moving around it.
View 7 Replies
Apr 12, 2011
And just loved the way it looked, anyone have any idea how to get a similar effect using ideally CSS/JS and if not then using flash? Furthermore it would be excellent if you could move to the next slide by clicking on the image itself.I'm also wondering how she is able to maintain height of the images when resizing (unless she is doing it manually which I doubt now days).
View 1 Replies
Nov 8, 2009
I have a Flash CS4 Professional version installed in my machine. Here is my problem.
1st - I'm importing an image to stage and set the width and height to match the image. (everything is good, no problem) 2nd - I am using the FLVPlayback components build-in from Flash CS4. It does load the video and everything. (everything seems good) 3rd - Publish the video to my local drive (everything seems good) 4th - I could play the video from my local pc and it loads fine and fast 5th - Upload everthing from my local folder to the Web server, it does display the background image but not the video. It has a white blank screen. What is going on? I copy the exact folder from local to server. What have I missed? How could I make the video to load?
View 1 Replies
Mar 1, 2012
In AIR/AS3 Flex Mobile for Android project.How can I capture an "image" of whats visible on the view then just save that image as anything like jpg/pdf to the SD card?Basically a screenshot on Android using AS3.
View 1 Replies
Mar 20, 2012
I'm creating a moodboard application where the user can dynamically load an image onto the stage by pressing a thumb of the image in a menu item. I have most of that working but what I would like to know is that, if there is a way the user can interactively scale/transform the image when it is on the stage in the swf file?
View 2 Replies
Dec 17, 2004
I have found 2 different Threads about the topic, which worked fine.[URL]... and it seems that it is close to what I am trying to achieve. However, the codes that they came up with don't seem to work with mine. I attached the FLA.Anybody has a solution so when the stage is scaled down smaller than the original image size, the image stops scaling. And the image doesn't distort. The eagle on the intro scales proportionately and the one when you go to campaign section behaves exactly like I would like to.I've found the website here by the way, which was the starting point of my experimentation.
Code:
//stage properties
Stage.align = "TL";
[code]....
View 8 Replies
Aug 12, 2009
im working on an image viewer and im loading an image to a loader and then add the loader to the stage.I want the user to be able to drag and drop the image but since it's a loader i dont know how to do it.
I tried
imageLoader.startDrag = true;
imageLoader.content.startDrag = true;
but im getting an error on both.
View 2 Replies
May 10, 2010
mouse (stage 400 w 400 h) (image 2000 w 2000 h) How do I zoom in my travels.
View 2 Replies
Oct 12, 2009
I have done the following coding to get images loaded using array. Now I just cant get the images to appear on the screen when I publish it.
I am not getting any errors either.
[AS]package asFiles{
import flash.display.*;
import flash.net.*;
import flash.events.*;
[Code]....
View 1 Replies
Dec 21, 2005
i know there is a code that determines which of two values is larger and returns the larger value.i cannot seem to find it in the actionscript help.i know you can do it with
[code]...
but there is an easier way and i cannot find the file that i used it in previuosly.
View 3 Replies
