I am trying to get a Papervision 3d plane with video attached to it to orient to the marker on the y axis. That is when you hold the marker at a z axis(flat) the video plane plays vertically, basically like a hologram playing off a flat surface. I am new to papervision 3d and I cant figure out how to orient the plane to the marker.
View 3 Repliesthis tutorial create augmented reality an application with 3d *.dae files. [URL] I want to do this with video files. So, when i show the pattern to the camera, video play. How can i do this? :/
View 2 RepliesI'm trying to do a little augmented reality. I'm using an action script to call a video and play it. The problem that I'm having is that the sound is starting the moment the window is open and the video plays with the marker is shown. I want the sound and video to only play when the marker is seen. I would like it to pause when the marker is removed and then resume where it left off when the marker is seen again. Here is a copy of my code if someone could look it over and tell me what I'm doing wrong. PLEASE PLEASE PLEASE just correct my mistake. I don't understand enough about coding for you to just say Netstream.pause() and netstream.resume. I don't know where to put that information in.
package { import flash.display.Sprite; import flash.events.Event; import flash.display.BitmapData; import flash.display.Loader; import flash.net.URLRequest; import flash.media.Video; import flash.net.NetConnection; import flash.net.NetStream;
[code]........
The program works just fine, and I am able to play the vĂdeo.flv in the augmented reality, but i need a preload for this because the flv is about 20Mb... how can I begin to add a preload to this project?
View 1 RepliesIs there any tutorial of how we can take a picture of augmented reality application in Flex, like in this video at 1:12 min.
View 1 RepliesTutorials that I've been looking at are either about Augmented reality or Papervision 3D click-ability. I haven't found any article that talks about them at the same time
View 2 Replieshow to insert a swf file in augmented reality?
View 4 RepliesI'm trying to develop an augmented reality game on an action script project in flex and I have a small problem, I need to load a png image on the stage so I have put it into a swf but when loading the swf with the pngs do not show me anything.
[Code]...
I'm trying to work with Augmented Reality, I saw some examples and I'm trying to make some changes.
[URL]
this example it shows a 3D cube.What I want is a little easier, I think.I want to show a image or a .Swf file.
AS he it uses:
Code:
package {
import org.papervision3d.lights.PointLight3D;
import org.papervision3d.materials.WireframeMaterial;
[code].....
When I compile, he shows the image.What I want is to show the image only when I show the marker.
URL..which should be recognized via a webcam. So this image is the original which should be included into the swf. If a person show this image in the webcam, an overlay of a video should added and played (augmented reality).How can I do this? I found FLARToolkit, but it is not possible because I need a black border which the original image does not has.Are there other libraries which have this functionality?
View 2 RepliesI'm looking into producing a relatively basic augmented reality web app where a user can print out a pre-made marker, which when held infront of their webcam and viewed through the app will display an object on top which the user can move around and explore. Something very similar to this: [URL] but with a simpler model. I have absolutely no idea where to start and am struggling to find any decent sources online.
View 0 RepliesI'm trying to make a cube based on six markers for augmented reality and I need to display a defferent video on each marker, I followed Lee Brimelow in "Learn how to use the FLARManager library to make creating AR applications", the tutorial worked perfect but I can't use my own video and SWC file!
And also I followed the best tutorial for multiple markers "Tracking multiple augmented reality markers with FLARManager and papervision" by Rob Hawkes and got it worked, how to load my six videos into an array to work as materials for my planes (markers)?
this tutorial create augmented reality an application with 3d *.dae files.
[URL] I want to do this with video files. So, when i show the pattern to the camera, video play. How can i do this?
This is for a freelance design i am working on. I would do it expect coding and flash is very confusing to me and hurts my head. I have a link that says how you make it but im not quiet sure. [URL]if someone can please make me something that would be great i will give you all the details you want in a email but i dont want to share it in the forums if its illeagle or not (its not illeagle by law but maybe by forums idk) my email to contact me is [URL]
View 26 RepliesI tried to playing around with the augmented reality. Therefore I watched the tutorial (http:url....) and all works like a charme to me. I replaced the kramer.m4v with my own video. It works perfectly.But I want to have my own video on a transparent layer.So that I can see myself not within the background of my video.Therefore I did a video on a greenscreen and keyed the background. All seems to be ok!I exported the video in an .mov with the alpha channel. It works so far, but the black background is still there if i hold the marker to the camera.so my question is: Is it not possible to export a mov with the alpha channel to let the background go away?
Any hints or workaround? I just want to have a video with me speaking on a transparent background and not with teh black background. I changed the kramer.m4v in the HELLOFlar.as to kramer.mov (its with my own video, just the name is the same) but the background isn´t gone
i'm trying to make an augmented reality game..my game will be composed of a main menu..and in the main menu you can either choose to start a new game,option,and exit button, what will i do to make my background a webcam view when i click the new game button??
View 2 RepliesI'm researching a potential project involving flash based augmented reality, and I've already looked at FlarToolkit and FlarManager which seem pretty straight forward to execute marker detection. What I cannot find are any sites or assistance with how to detect hand position, etc. To allow the subject to 'press' buttons. An example of what I mean can be found here: [URL] where the model presses virtual buttons to take action.
View 2 RepliesI'm trying to do some augmented reality projects with flartoolkit . I can now put simple 3d objects on my marker and it works fine , but I wanna give my project some events that the user can interact with. I'm trying to trace the rotation of the marker. there's a container:DisplayObject3D which my application uses to add the 3d objects , I traced this :"trace(container.rotationZ)" but it's just returning 0 . I studied another AR application's source code and it was using the rotation of it's container object without problem .and I think I should mention that I'm using the exercise file of seb lee delisle papervision3d course from [URL]. anyone has any experience with flartoolkit? the main functions of my my code is as below:
[Code]...
I am using Flash Builder 4 to run Lee's tutorial "Augmented Reality with FLARManager".However, upon importing the project and running, it shows the feed from the webcam but it's frozen on the first frame. I have a Logitech Quickcam Pro for Notebooks and, thinking it may be interference from the Logitech software, tried killing all Logitech-related processes but to no avail. I also tried making the project on my own and writing only the first few lines of code as the minimum requirement to get the webcam displayed (ie: everything up to about 9 minutes). Also, I'm working with FLARManager v1.0 which has some slight differences from v.6 Lee was working with for this tutorial. I'm fairly sure I've fixed these differences (in this case, the constructor for FLARManager) as specified on FLARManager's website. Here's my code:
Code: Select allpackage
{
import com.transmote.flar.FLARManager;
[code].....
I have a dae file which includes an animation. I loaded it to papervision, and also i have an embedded video in my scene. The thing i want to do is, running the video and animation both at the same frame rate. Normally, i have a synchronization problem so i wanted to use updateToFrame method in AbstractChannel3D and tried to import current frame rate of the video to dae animation file, to solve this problem. but it doesnt work.
View 0 RepliesI try to make a 3d wall gallery using 3dpapervision. My gallery contain photos & video. I can make with the photos, but when I insert the video file ( FLV) there is a error: "Error #2044: Unhandled IOErrorEvent:. text=Error #2124: Loaded file is an unknown type."
insert video file in 3d papervision.
I am trying to build a portfolio application similar to the used by Whitevoid. I am using Flex 4 and Papervision3D 2. I have everything working except for one issue. When I try to load an external SWF as a material on one of the planes, I can see any native Flex or Flash components in their correct positions, but the papervision objects are not being rendered properly. It looks like the viewport is not being set in the nested swf. I have posted my code for loading the swf below.
private function loadMovie(path:String=""):void
{
loader = new Loader();
request = new URLRequest(path);
[Code]....
Below I have posted two pictures. The first is a shot of the application running by itself. The second is the application as a MovieMaterial on a Plane. You can see how the button created as a spark object in the mxml stays in the correct position, but papervision sphere (which is rotating) is in the wrong location.
application definition: i have this desktop flash application that will go fullscreen what this application do is loading external asset (mostlySWF) and play it inside this application. Each external asset will be place inside a container/holder (empty movie clip created by code), each of this container have it's own dimension ( width, height, x, y).my code all working without any warning nor error.oh and i also have an image.jpg/png as it's background and place at the bottom of display list (depth = 0), the image is customly made with using photoshop and each container location and dimension also measured there so it just needed to be writen down is the XML file..,
the problem: the bug is when i loaded some image of those background image each container width,height,x,y will mismatch with what i have in the XML file. the funny thing is when i trace the value of each container width,height,x,y it value is the same with what the XML has yet by seeing with eye you know that is wrong..,
[Code]...
I asked this question in papervision 3d forums, but nobody replied. So. I am writing a 3D application with actionscript 3 and papervision 3D. But I have stuck on one problem, I can't figure out, how to place skidmarks (decals?) on an object. The only method I can think of is drawing directly to BitmapData (texture). What would you suggest to draw a textured skidmark on ground (plane primitive)?
View 1 RepliesI have done globe in papervision - basically sphere + material (image of political map) over it.Now, I need to make every country on my globe interactive, what means, I need somehow create event listeners for lots (at least 15) of small areas on my globe, and if I click those areas, something will happen (say, additional info windowwill come out)I googled a lot and found a lot of things describing some realted stuff (hotspots?), but since I am quite new in flash/actionscript/papervision, could I, please, get some introductory idea how my problem might be solved?
View 1 Repliesi was trying to put text in papervision but am having touble.
View 4 RepliesIs there any development tool that has the papervision3d classes buit-it, so i can get hints when i'm writing th code as i get hints for as3 code?
View 2 RepliesI am new to Papervision, and am experimenting on importing animated 3ds max models into my project.I can export a model (with no animations) into Collada format, and import it using Papervision, with no problems. But when I try to import a model with animations, i get this error:[code]I am using Flash CS 4 / Papervision3D Public Beta 2.0 - Great White / 3D Studio Max 2009 (with the New Collada Plugin).
View 7 RepliesI am trying to develop a game based on papervision and flash.the very basic idea of the game is that some 3D objects are falling from the sky and you have to catch them .. At a time there can be as many as 20 of such 3D objects on the stage.Now the problem is that these 3D objects are causing too much CPU usage .. I was hoping if there was another way to do the same thing and which causes less of performance issues ...
1.I have two classes suppose A and B
2.the class A calls class B
3.class B initiates a 3D sphere whenever it is called .. the Sphere has a bitmap image material .. and it rotates along the X axis on every enter frame event
4.class A has a timer function which moves the 3D object in the Y direction and also destroys it when the object reaches a specified Y position ..here are the code snippets ...
Class A :Code:
public function onTick(e:TimerEvent)
{
if(Math.random() < spawnrate)[code]......
trying a simple papervision tutorial and swf stops rendering by mat = new MovieMaterial(rec);
[Code]...