I have a linear movie I have created in Flash and I am not an ActionScript user at all, but I am trying to find an answer or some resources on how to create a small "button" that once clicked by the user will pause my Flash movie, and then once clicked again, will make it play.
View 1 RepliesI have several products I want to animate with graphics and text individualy then stack them on a time line for output with play and pause buttons. Is there a tutorial somwhere that shows you how to do this? and how do I stop the entire animation on a frame, I don't understand "not_set_yet"
View 4 RepliesI hav a flash-movue with several movieclips at different depths.Is there a way to program a universal pause/resume-button in actionscritp 2?
View 1 RepliesI have a question in Flash play/pause button. I have created a flash slideshow which was exceeding 16000 frames, so I've split the movie into two. I'm loading the second movie at the end of the main movie using loadMovieNum. I have placed the play/pause button in the main movie which works fine until the second movie loads. This used to work for me in the older version of Flash (flash 8).I'm using CS4 now.
View 3 RepliesIn my scene I have a movie scene(movie1) that will slide into frame once a button is clicked.
Inside Movie1 I have another movie scene (movie2) that will fade in once button is clicked.
When I click the button movie1 will play but not movie2.
Here's the coding I use for the button:
Code Begin:
on (release) {
if (MOVIE1.MOVIE2._currentframe == 1) {
MOVIE1.MOVIE2.gotoAndPlay("2");
[Code]....
I have a flash xml slide show. I need to create a play pause toggle button that will stop the xml slide show and start it again.
Here is the actionscript:
Code:
function loadXML(loaded)
{
if (loaded)
[Code]...
I have seen umpteen different guides on how to make a play/pause button in flash. and i cannot get it to work. I think i may pull my hair out soon.basically- i have made an mc which sits on the main timeline. i t has 2 frames, ecah of which has a stop() action in the frame. the first has a pause button with the following script attached to to the button:
on(release){
_root.stop();
gotoAndStop(2);
}
i have also tried putting in nextFrame instead of gotoAndStop() -but this is besides the point as it's not even stopping!in the second frame there is a play button with the following scruipt attached to it:
on(release){
_root.play();
gotoAndStop(1);
}
I think the problem may be deeper rooted because i have looked on sevral guides and they all tell me to do a similar thing.
In fact i made a button which sat on the timeline with this script
on (release) {
_root.stop();
}
and STILL nothing happened!
I am new to this flash and I am using as2 for the action script I wanted to know how to create a toggle button so far this is all I have.
on (release) {
play ();
} on (release) {
stop ();
}
I wanted so that when you hit playit would start the animation but showing the pause button and vice versa.
I have embedded the video in flash using player. Now I want a play/pause button for video.I am using ns.pause();to pause the video, its working.here ns=video instance name.but the play button is not working when I use below code
View 3 RepliesI have a movieclip within the main clip called "playPause" which starts with the Pause button shown. When clicked the movie clip moves to show the play button and pauses the current parent movie with the AS "_parent.stop();" when the play button is then pressed the movie plays via "_parent.play();" and reverts back to showing the pause button.
Simple so far. What is getting me is if I add a movie clip within the parent (say some scrolling object) I cannot get the added clip to pause. For example say the "parent" movie clip the playPause moveclip is within is called "intro" and the moving object is called "introObject" which is embedded in a frame along with "playPause"
What I have setup for the playPause buttons is for pausing
_root.introObject.stop();
and playing
_root.introObject.play();
I am using Flash CS3 and ActionScript 2.0. I have a flash timeline that shows 4 tabs and cycles through them. There is also a play/pause button. My issue is that when you click one of the tabs, you start the timeline up again, but the play/pause button doesn't reset. I have the full Flash file, as well, if needed. [URL]
Attachments: TabbedFlash10.swf (52.7 K)
I've googled and googled but got no where or outdated tutorials. Anyone know how to make it so I can toggle audio with buttons using ActionScript 3 on Flash?
View 2 RepliesI'm trying to make a simple music player with only one button for Play & Pause the music. What I have now is a MovieClip with:
1st Keyframe: active state for play Button
2nd Keyframe: active state for pause button
3rd Keyframe: hover state for play button
4th Keyframe: hover state for pause button
The script works OK, and play and pause the music without problems as expected.
The problem comes after the second click in the play/pause button when the alternance between two states becomes chaotic. The button never returns to the play state although the music was paused.
This is the code:
/**** Objects and Vars ****/
var AutoPlay:Boolean = false;
var isPlaying:Boolean = false;
[Code].....
I have been trying to create a play/pause button for the main timeline in my flash movie. Created a movie clip with 1st frame - a pause graphic, then on 2nd frame - play graphic, labelled the frames 'pause' and 'play' consecutively and put a stop action on the first frame of the movieclip. Then put the following code in the actions layer of the main timeline (and gave instance name of 'ppBtn' to the movieclip):
var pp:Boolean = true;
function ppState(event:MouseEvent) {
if(pp) {
stop();
event.target.gotoAndStop('pause');
[Code] ....
It works in stopping and starting the movie but the actual movieclip doesn't toggle between the pause and the play graphics (just stays on the 'pause' state - 1st frame).
I have a timeline of 30 frames, each it's own mc (page01_mc, etc.). In each mc I show a picture or two and hear narration.I have a first, prev and next nav on the main timeline. I need to add a play/pause btn that will pause both pictures and sound. I assume I do that in each mc, but do not know where to find the code.Here is what is in each mc now:
var mySound:Sound = new Sound();
mySound.load(new URLRequest("english/Intro01.mp3"));
mySound.play()
I'm trying to make a simple flash mp3 player with a play/pause toggle button called toggle_btn. The button is actually a MovieClip with two buttons inside it: play_btn and pause_btn, which live in different places on the MovieClip's timeline. That all works fine, and when I press the play/pause button for the first time, my music plays as expected.
However, when I press it again to pause, it keeps right on playing. If I push it again, the button gets all glitchy, and doesn't go into its rollover state when it should nor toggle when clicked.
Here's my ActionScript:
Code:
// load the playlist
var getFile:URLLoader = new URLLoader(new URLRequest('songs.xml'));
var numSongs:int = 0; // number of songs in playlist -- we'll set this later
[Code]....
i started with a Multiple mp3 players project and i more complicated with that - as you see in the picture i try to do that when click on the play button for every song this switch the song that selected -first preloading + percentage the mp3 file and after play it immediately and of course there is stop button, pause button when choose a song the previously that play will be muted
View 4 RepliesI finished the Flash Video Basics Tutorials, but I'd like the video not to start playing straight away. I also want it to stop playing when it's finished and not start over again.Is there also an easy way to have the play-button change into pause button, when the video is paused?
View 14 Replies I'm making a mp3 player using flash and i would like to have the play and pause function all in one button rather having separating into two buttons. Here is the code what I have so far.
Code:
playpause_button.addEventListener(MouseEvent.CLICK, playpauseButtonClick);
function playpauseButtonClick( event:MouseEvent):void {
theChannel = theSound.play(pausepoint);
[Code].....
I checked all flaskit sources and tutorials. All of them are telling about mp3 players with stop, play and pause buttons.
Is there any source or tutorial about a radio which continiously play songs ? No pause, no play, no stop button. it will play songs in specific folder nonstop in loop. ?
I'm trying to create buttons so a viewer can pause and then play an externally loaded swf. My project can be accessed at the linke below. This is how I want the project to function
-Click a room on the building (choose Accounting for this discussion)
-Click one of the demo options (choose Ending a Period for this discussion)
- Now that the demo plays, I want the user to be able to play and pause the demo swf.
The demo .swfs were created in Captivate so I don't have access to their timeline. They are loaded into an empty Loader component using the MovieClipLoader Class.
[URL]
I'm extremely new to Flash and I am making a website and want to have a single button that when pressed pauses or plays a music file. I was able to create one that works by following a tutorial that I found online but the problem is that the button is on the main timeline so as I move away from it, it stops working. I think that it would work better if I was able to make a movie clip out of the button so that it doesn't sit on the main timeline and will keep working no matter where I am on the timeline. All I need is one button that pauses and plays music when pressed. I also want to be able to have a "music on" line of text and "music off" line of text depending on whether the music is playing or not.
View 4 RepliesWell as the title says I need to create an Play/Pause button in one. So when I click on the button it plays my animation, then when I click on it again it pauses it. And then when I click on it again it plays the animation where it was. etc. etc.
I know how to create a simple button and give it an event and an function, but I cant figure out how to get those 2 functions together in one?
[Code]...
I have created a Pause and Play button that toggles between states. It controls a Timeline with synced Sound. When I use it the sound and animation go out of sync. Can anyone help me with this or perhaps have better code I could swap out to make this work?
Below is what I am currently using:On the first frame of an Action Script layer put this AS:
playBtn.onRelease = function() {
ns.pause(false);
playBtn._visible = false;
pauseBtn._visible = true;
[code]....
Put the Pause and Play buttons directly over each other on 2 layers for the duration of the timeline.Pause Button on top. (unless you have a STOP on the first line then maybe the Play button will start it.
I am trying to make an animation that will pause and start again after a certain time. The problem is I don't have any experience with Actionscript (or programming of any sort for that matter)..I found this link that appears to explain how it's done, but I can't seem to replicate it. I'm not even sure which version of Actionscript this is.. [URL]
View 5 RepliesI have a play/pause button on my animation which works a treat when all animations are within the main movie clip. Now I would like to have some movement within the main movieclip and some within individual sub movie clips. Once I go to play the animation all animated objects within the main movieclip are stopped but the sub movie clips are playing. How can I stop the sub movie clips to???
The following is the current code I have
ActionScript Code:
stop ();
play_btn.onRelease = function(){
gotoAndStop(2);
_parent.play();
[Code] .....
how to create a button to pause/play a FLV?I have an FLV with cue points (using the FLVPlayback component). The cue points are controlling when graphics are added to some empty movieclips on the stage. The FLVPlayback component skins would work but they are hidden by graphics on higher layers.I'm using CS4, Flash Player 8 and AS 2.0.
View 1 RepliesHow to add both pause and play sound button in a single button.. on play it shows the image pause and on pause it shows the image play.
View 4 Replies'm extremely new to Flash and I don't really know how to code yet.. I'm making a website and want to have a single button that when pressed either plays or pauses the music file. I found a tutorial that worked but it has two buttons (one for play and one for stop). You can see the tutorial here:[URL] I'm hoping that someone can tell me how I might be able to change the code so that a single button acts as both play and pause (i.e.; If music is not playing then play, if music is playing then stop).
View 2 RepliesI have a flash program that needs to play and pause when the button is clicked, right now I have this code
Code:
var status;
status = stop
on (release)
[Code]....
this is of course is not right. my var is in the wrong place but i dont want to declair on every "on (release)"