I have a movieclip within the main clip called "playPause" which starts with the Pause button shown. When clicked the movie clip moves to show the play button and pauses the current parent movie with the AS "_parent.stop();" when the play button is then pressed the movie plays via "_parent.play();" and reverts back to showing the pause button.
Simple so far. What is getting me is if I add a movie clip within the parent (say some scrolling object) I cannot get the added clip to pause. For example say the "parent" movie clip the playPause moveclip is within is called "intro" and the moving object is called "introObject" which is embedded in a frame along with "playPause"
What I have setup for the playPause buttons is for pausing
_root.introObject.stop();
and playing
_root.introObject.play();
I'm trying to make a simple flash mp3 player with a play/pause toggle button called toggle_btn. The button is actually a MovieClip with two buttons inside it: play_btn and pause_btn, which live in different places on the MovieClip's timeline. That all works fine, and when I press the play/pause button for the first time, my music plays as expected.
However, when I press it again to pause, it keeps right on playing. If I push it again, the button gets all glitchy, and doesn't go into its rollover state when it should nor toggle when clicked.
Here's my ActionScript:
Code: // load the playlist var getFile:URLLoader = new URLLoader(new URLRequest('songs.xml')); var numSongs:int = 0; // number of songs in playlist -- we'll set this later
I have encoded a video to make a .flv for my site, I want to add a simple pause/play toggle button for the flv, does anyone know what code I need to add to a button to get it to work? I don't want to use the default skins and can't seem to find away to get it to pause / play??
I need to add code to my game. All the levels of the game are in separate frames of a movieclip called 'game'. I need a pause and play button to stop everything going on and then a play button to start it again.
I am trying to load a movieclip and have it be controlled by a play and a pause button. The load works good and the code for the play/pause works.
I need the "test2" file to load the "ball_mc" file and then I should be able to play and pause the ball as it runs across the screen. I think I need it to be a swf file also, but Flashkit won't let me upload that type of file.
I have a button (bttn1) which when clicked plays a movieclip (bounce), but I would like it to play from frame 1 then stop on a desired frame(say frame 10), so when a second button is clicked (bttn2) it plays from frame 10.
I just need something simple, where there is only pause, play and stop buttons. I usually load the music within the flash movie and play from there, but I would like to build one where if you press play, the music loads and plays streaming on the spot. I have got a couple of more complex streaming style mp3 players but I would like to use a simplified streaming version. Any recommendations or code that I can just add to a button?
I'm struggling with a script to make a simple audio player. I'm loading the audio externally, using loadMovie. I have three buttons on stage ("Stop","Play", and "Pause"). First two work nicely, problem is the third one. here are the actions for the three buttons:
STOP button - Working
ActionScript Code: on (press) { audioContainer.unloadMovie(10); }
[code]....
BTW, the external movie clip contains an audio track inside a movie clip. Any ideas how to make the thrid button to "pause" the audio?
I have created a simple navigation bar that has 6 buttons. the bar was created using movie clips then by putting an "invisible" button underneath. as for the action script:on the main stage in an actions layer i have:[code]I have this code for every button, except the names of the movie clips change. All the movie clips do for now is have a graphic go from black to red.The action script for the buttons are as follows:[code]Now when i play the clip everything works like i want it to work...The problem arrises once i load the bar into my header.What I have done is created a new file which contains my header... I added a layer called load with a blank movie clip with the instance name of load_mc in another layer called actions I added the following action scripts:[code]When I play this file, my button_bar.swf load but the graphic keeps playing over and over again instead of only playing on mouse over.
I have seen umpteen different guides on how to make a play/pause button in flash. and i cannot get it to work. I think i may pull my hair out soon.basically- i have made an mc which sits on the main timeline. i t has 2 frames, ecah of which has a stop() action in the frame. the first has a pause button with the following script attached to to the button:
on(release){ _root.stop(); gotoAndStop(2); }
i have also tried putting in nextFrame instead of gotoAndStop() -but this is besides the point as it's not even stopping!in the second frame there is a play button with the following scruipt attached to it:
on(release){ _root.play(); gotoAndStop(1); }
I think the problem may be deeper rooted because i have looked on sevral guides and they all tell me to do a similar thing. In fact i made a button which sat on the timeline with this script
I have a nested movie 1 layer down from main stage that has several navigation buttons that move to different main stage labeled frames. I get an 1120 error because I am somehow not calling them out on the script. I have named the instances..so that's not the problem. I think I just need to somehow direct the script to the nested location. If I move the buttons to the main stage I get no errors and it all works perfectly.
I have a linear movie I have created in Flash and I am not an ActionScript user at all, but I am trying to find an answer or some resources on how to create a small "button" that once clicked by the user will pause my Flash movie, and then once clicked again, will make it play.
I have embedded the video in flash using player. Now I want a play/pause button for video.I am using ns.pause();to pause the video, its working.here ns=video instance name.but the play button is not working when I use below code
I am completely new to AS3, and am trying to learn the basics, but have been having issues with what I think should be a simple command. I need to have two frames, the first one with a simple button that when clicked loads frame two and on frame two a seperate button that when clicked loads frame one.
When I try using the following type of event handler, i can link from frame 1 to 2, but not back and get an error message:
(TypeError: Error #1009: Cannot access a property or method of a null object reference. at mc1_fla::MainTimeline/frame1()
I am using Flash CS3 and ActionScript 2.0. I have a flash timeline that shows 4 tabs and cycles through them. There is also a play/pause button. My issue is that when you click one of the tabs, you start the timeline up again, but the play/pause button doesn't reset. I have the full Flash file, as well, if needed. [URL] Attachments: TabbedFlash10.swf (52.7 K)
I've googled and googled but got no where or outdated tutorials. Anyone know how to make it so I can toggle audio with buttons using ActionScript 3 on Flash?
I'm trying to make a simple music player with only one button for Play & Pause the music. What I have now is a MovieClip with:
1st Keyframe: active state for play Button 2nd Keyframe: active state for pause button 3rd Keyframe: hover state for play button 4th Keyframe: hover state for pause button
The script works OK, and play and pause the music without problems as expected.
The problem comes after the second click in the play/pause button when the alternance between two states becomes chaotic. The button never returns to the play state although the music was paused.
This is the code:
/**** Objects and Vars ****/ var AutoPlay:Boolean = false; var isPlaying:Boolean = false;
I understand how to create simple buttons as reuseable classes, but how could you create a next button that does something similar to the AS2 "goto and stop nextframe", and a back button that does something similar to the AS2 "go to and stop previous frame".On each frame that the user navigates to, is a movie clip, within that movie clip is then another button with a go to and play "Frame Label" action required, that navigates within the movieclip to a specific frame.
I have been trying to create a play/pause button for the main timeline in my flash movie. Created a movie clip with 1st frame - a pause graphic, then on 2nd frame - play graphic, labelled the frames 'pause' and 'play' consecutively and put a stop action on the first frame of the movieclip. Then put the following code in the actions layer of the main timeline (and gave instance name of 'ppBtn' to the movieclip):
var pp:Boolean = true; function ppState(event:MouseEvent) { if(pp) { stop(); event.target.gotoAndStop('pause'); [Code] ....
It works in stopping and starting the movie but the actual movieclip doesn't toggle between the pause and the play graphics (just stays on the 'pause' state - 1st frame).
I have a timeline of 30 frames, each it's own mc (page01_mc, etc.). In each mc I show a picture or two and hear narration.I have a first, prev and next nav on the main timeline. I need to add a play/pause btn that will pause both pictures and sound. I assume I do that in each mc, but do not know where to find the code.Here is what is in each mc now:
var mySound:Sound = new Sound(); mySound.load(new URLRequest("english/Intro01.mp3")); mySound.play()
i started with a Multiple mp3 players project and i more complicated with that - as you see in the picture i try to do that when click on the play button for every song this switch the song that selected -first preloading + percentage the mp3 file and after play it immediately and of course there is stop button, pause button when choose a song the previously that play will be muted
I finished the Flash Video Basics Tutorials, but I'd like the video not to start playing straight away. I also want it to stop playing when it's finished and not start over again.Is there also an easy way to have the play-button change into pause button, when the video is paused?
I'm making a mp3 player using flash and i would like to have the play and pause function all in one button rather having separating into two buttons. Here is the code what I have so far.
Code:
playpause_button.addEventListener(MouseEvent.CLICK, playpauseButtonClick); function playpauseButtonClick( event:MouseEvent):void { theChannel = theSound.play(pausepoint);
i have a swf with a movie clip in it (38 static image frames long)on loading of the swf i would like to play the movieclip, then pause it on the last frame for 1 second then play the frames in reverse then pause it on the first frame for 1 seond and then play the frames in correct order ETC ETC ETC
I checked all flaskit sources and tutorials. All of them are telling about mp3 players with stop, play and pause buttons.
Is there any source or tutorial about a radio which continiously play songs ? No pause, no play, no stop button. it will play songs in specific folder nonstop in loop. ?
I'm trying to create buttons so a viewer can pause and then play an externally loaded swf. My project can be accessed at the linke below. This is how I want the project to function
-Click a room on the building (choose Accounting for this discussion)
-Click one of the demo options (choose Ending a Period for this discussion)
- Now that the demo plays, I want the user to be able to play and pause the demo swf.
The demo .swfs were created in Captivate so I don't have access to their timeline. They are loaded into an empty Loader component using the MovieClipLoader Class.
I'm extremely new to Flash and I am making a website and want to have a single button that when pressed pauses or plays a music file. I was able to create one that works by following a tutorial that I found online but the problem is that the button is on the main timeline so as I move away from it, it stops working. I think that it would work better if I was able to make a movie clip out of the button so that it doesn't sit on the main timeline and will keep working no matter where I am on the timeline. All I need is one button that pauses and plays music when pressed. I also want to be able to have a "music on" line of text and "music off" line of text depending on whether the music is playing or not.
Well as the title says I need to create an Play/Pause button in one. So when I click on the button it plays my animation, then when I click on it again it pauses it. And then when I click on it again it plays the animation where it was. etc. etc.
I know how to create a simple button and give it an event and an function, but I cant figure out how to get those 2 functions together in one?
