Anyway, my question is this: In AS3, how do I get it to (for example) gotoAndPlay frames 15-20, then jump to frame 50?Basically I have a heap of buttons, all of which (when pressed) I would like to play frames 15-20, but then each go to a different frame once they've reached frame 20...
View 2 RepliesI have several labeled clips in my timeline for a website i am making. the clips are in and out transitions and are labeled like this: home_in, home_out, products_in, products_out, contact_in, contact_out, etc. so, my button code is like this:
[CODE]....
I'm trying to build a basic website, and I want it to where when I click a button for another page, it plays the out animation for the current page, then the in animation for the page selected. Basically, for example:
Frames 1-10 are the out animation for a page, frames 20-30 are the in animation for page 2. When I click the button for page 2, I want it to play 1-10, then jump to and play 20-30.
I built a button in one of the movie clips in my project,
when I release this button, it goes to the 41st frame of the main timeline and continue to play until the frame 70 which has got a stop; command. till here everything's just OK. But I want this button to do something more though I don't know whether it's possible or not.
I want this button to go and play the frame number 41 in the main timeline, and then after it stopped at the frame 70 , then jump to frame 73.
I have a button that when clicked,i want it to play an animation from frame let say 3.
View 2 RepliesI have two embedded flv's in the timeline, one after the other. There are no errors in the video files. When the "playhead" in the exported swf comes to the end of the two combined videoclips, it jumps back to the first frame of the 2nd video clip for a fraction of a second, before playing from the start of the timeline as it is supposed to. I have explicitly done a "gotoandplay(1) in a separate action layer, at the last frame of the "movie", but that's not what happens.
View 0 RepliesI hope I can ask this correctly. I'll paraphrase.
press_mc.onRelease = function(){
mover2_mc.play()};
This is a snippet of some code I'm working on. Currently I have a mc that you press that plays another mc. That mc that reacts has 5 frames, each frame with stop(); on each frame. I do a normal play code because it lets me play through and cycle back to frame 1 after frame 5 (so if I click the mc it eventually cycles back to the first frame and starts the process over again). If I do a nextframe it stops at frame 5, so that's why I use play.
press_mc click on it and it tells mover2_mc to advance a frame and recycles back to frame one to redo the process.Can I tell press_mc to play and skip a frame or to have it play a list of frames that I tell? I can't do a _currentframe +2 because it'll halt at frame 5.
I'm using Flash CS3 and AC2... I have a button on my main TL and I want to go back a few frames and play a MC at a specific frame when hit.
View 3 RepliesI am new to Flash and was hoping for some help with an actionscript 3 problem. I have imported an FLV onto my timeline and I wanted to pause the first frame for 20 frames before it starts to play.
View 2 Replieshow to make a movie clip play UNTIL a certain frame depending on which button is pressed. Logically it would be called playuntilandstop();
View 1 RepliesI am currently in the middle of making a "sniping" flash game. In the first level there are a series of moving targets which are also movie clips. Inside the movie clip there is a 7 frame animation of the target exploding. Inside that is a tween of the target moving up and down. And inside that there is a plain old button.
What I want to happen is when you click on the moving target it explodes and brings you to a new frame of the main timeline. (ex. Main Timeline frame #27) But I'm pretty sure it thinks I was to play the seven frame animation of it exploding and then go to frame 27 inside the movie clip, rather then frame 27 on the main timeline.
Here's what my AS looks like on the target (ActionScript 2.0 is what I'm using.)
on (press) {
play();
}
on (release){
gotoAndStop(27)}
So how do I make it explode and then take me to frame 27 on the main timeline?
is there anyway to have a button play frames 5-10 on a movie clip inside the current frame, as well as skipping to...lets say...frame 10 of the scene?
i want to create a site where buttons go to different pages, but those pages have animations in and out.so if someone is in one page, and clicks a button to go to another, that page plays the "out" animation while the other page plays the "in" animation.
The button tells the playhead to jump to the next frame with this code:
on (press){nextFrame ();} Where can I put a "+ 2" in there to make it jump 3 frames ahead?
I'm using the Flashdock component from FlashWebTools. The online tutorial gives the code for loading a swf in the mcTarget:
Code:
navigationMenu.addEventListener("onRelease", this, "onNavigationMenuRelease");
function onNavigationMenuRelease(Sender) {
// Sender is the released button
[code].....
What I want to do is have two of the buttons open an html page (_blank), and the rest of the buttons to jump to a specific frame in the current flash movie. What code would I use for this? I'm assuming there would be no more need for the mcTarget symbol, right?
i have on a close button code which says gotoAndPlay this frame (the onrelease effect) etc...anyway at the end of this effect i have a stop aswell as _root.gotoAndStop("home"); the home that appears there and what your looking at, at the end of the effect is the same thing...so why am i getting this jumping or flash? before it goes back to normal?
View 1 RepliesI want to make an interactive flash file, and the way I want to have it layed out is that a steady animation will play in one layer, while being able to jump around in frames with events such as a mouseover.I'm going to give a generic example, this isn't what I'm going to do, but it gets the point across.Theres a house and a tree. The leaves on the tree are falling, and upon mouseover of the house door, the door will open. Yet the leaves will remain falling (without skipping frames in the animation) while the door is still opening.How do you do this without using a goToAndPlay(x) or such that jumps the whole animation?
View 11 RepliesI'm using a combobox to jump to different frame lables. Nothing is working. Here is my code:
menuCombo.addItem("Home", "Home")
menuCombo.addItem("About Us", "About Us")
menuCombo.addItem("Products", "Products")
[Code]....
I'm trying to figure out the basics. Right now I'm just trying to make a flash sequence that continues to jump randomly from frame to frame without stopping.
View 5 RepliesI have been tasked with making this happen [URL] - What Ive done is take out footage and include keyframes for each frame (cue points on every frame), which i read helps with scrubbing... and it does. however using an invisible scrubber bar (seekbar) just isnt smoooth enough... So i was wondering if I could register an eventListener on the mouse and when it moved forward, jump x frames/time forward in the flv clip.
View 1 RepliesI want to be able to add an action script for a button that is able to jump to different frames of a movie and play them in sequence. For example I want to be able to add an action script to a button so that when the button is released I want the movie (animation) to start at frame 10, play till it reaches, frame 20, then immediately jump to frame 30, play to frame 40 and then stop. The Idea is to play different animations in sequence with just one button. Whenever I press the button I don't want to see the animation in frames 1-9 or 11-19. If I can figure out how to do this I will be to have different buttons controlling different sequences of the animation of the movie.
View 3 RepliesI need to create a script that will jump to a certain frame in the scene when a movie cilp reaches its last frame. Putting a goto... within the MC itself doesn't work. I assume that I need to create a listener of some sort....I haven't been able to find what I need in any documentation (and I'm even been looking through AS dictionaries going back to Flash 4).
View 1 RepliesI have a movie with various movie clips on certain frames. What I want is the playhead to randomly jump to different frames I specify within the movie after each Movie clip has played. So at the end of each movie clip there would be a random script forcing the playhead to play another movie clip randomly. My movie has 100 frames but I only want the random sequence to occur on the following frames 10, 13, 25, 86, 75, 56. Or If I labelled the frames how would I label them?? Would they all have to have the same label, or each label different?
View 2 RepliesI have my main swf and another swf in "/tools/FrameJumper.swf" In my main swf I have a movieclip container on the stage "myContainer" and when I click a button it loads that "FrameJumper.swf" into that container. Now in that "FrameJumper.swf" I have a txt box and a button. here is the code on that button
[Code]...
I just have a button and a movie clip (MenuUp) and i want the button to be able to make the movie clip jump to different frames...
[Code]...
I have a movie clip with a button, clicking on it goes to another scene. When in the other scene, i want to be able to click another button and go back to the original scene and have the movie clip be at the frame where I left it, or any other that I specify.
View 2 RepliesI have a memory game here. And each time a card is removed from the gameboard I have "cardCount -2", when this cardCount gets to zero, I want the program to jump to the next frame which is like a "game over" page. I've tried using gotoAndStop(); as well as nextFrame(); but it doesn't seem to be working![code]...
View 2 RepliesI have problem to jump to a frame after a video clip (which is on server) is done playing. Do you have any idea how to do this?
View 7 Repliesif a flash website can jump into another url if it enters a certain frame...
For example maybe something like?
on enterFrame {
getURL("http://www.sample.com/", "_self");
}
how do i tell the timeline to get that url instead of the button?
On the main stage there is a MC on frame 4.
I have a drop down menu button that I want to jump me to frame 2 of that MC
I tried this:
button.onRelease = function () {
_root.instance_of_mc.gotoAndStop(2);
}
but it didn't work.
I want to jump to a specific frame in the swf I load using the Loader class. As it is now it goes directly to frame1 in the file, which I dont really want it to do. I'm using Flash CS4
View 2 Replies