ActionScript 3.0 :: Populating A ComboBox With Names Of All Cue Points?
Jul 11, 2010
I'm working with Flash CS4 and ActionScript 3. I have a .flv file with about 30 cue points created in Soundbooth. When I run my video my listener picks up the cue points as expected. What I am trying to do now is populate a combobox with a list of all the cue points in the .flv file. Seems like it should be a super easy task to access an array of all the cue points in the .flv - but so far no luck.
View 1 Replies
Similar Posts:
Nov 19, 2008
I have main-swf that loads external swf. I made a combobox where user can choose another external swf and main-swf loads that after user have made selection. Everything works fine as long as code combobox labels and datas directly to the actionscript. When I tried to populate combobox with extrernal XML-file, it didnt work.[code]So, what I would like to do is get rid of that "varlehtivalikko: Array = new Array" where combobox data and label info has been stored and load that info externaly from my XML..
View 12 Replies
Jul 5, 2006
I am trying to populate a datagrid based on a value selected from a combobox. The data comes from a xml file, which looks something like this,[code]The user can list data in the datagrid based on either "media" and "region." For example, the user should be able to choose "Europe" from the combobox and list "only" media having "Europe" in the region tags. In this case, if the user chooses "Europe" from the Combobox only one listing (rammstein) will be seen in the Datagrid.However, it doesn't work. I get a blank datagrid. Loading data into the datagrid is not the problem, because if I just use a straight For loop with no conditions I fill the datagrid no problem. The problem comes up when I try to control what data get listed in the datagrid based on selected value in the combobox.[code]
View 2 Replies
Jul 16, 2010
I am trying to populate a combobox component with XML, but getting an error when publishing which is "accessof unknown property comboXML".The AS3 code looks like this.
Code:
/*populates the combo box with XML*/
comboXML = new XML();
[code].....
View 1 Replies
Mar 23, 2009
First project using flash and im having some problems with a combobox function im trying to apply. I have a combobox that I hope when selected populates an input text box on another frame. When I test when the input text box is on the same frame the code below works and the selection is shown, but i want to show the input text field on another frame and this doesnt work.
myCombobox.addEventListener(Event.CHANGE, myHandler);
function myHandler(evt:Event):void{
selectedLabel.text = myCombobox.selectedItem.label;
selectedData.text = myCombobox.selectedItem.data;
selectedIndex.text = myCombobox.selectedItem.index;
}
View 5 Replies
Sep 18, 2009
I am stumped. I have tried to load a comboBox with a for-loop to load k school names and can not get it to load dynamically. Here is what works:schools_cb.addItem({label:varLoad.data.school1});It manages to paste the name of school1 into the comboBox k times.Then, when I try:schools_cb.addItem({label:this["varLoad.data.school" + k]});orschools_cb.addItem({label:this.getChildByName("var Load.data.school" + k)});it brings up k blank entries in the comboBox.I am a poor teacher trying to make a signup page for our school's math contest
View 5 Replies
Oct 3, 2011
I have been tasked with trying to create a drawing tool that draws dotted lines as you drag the mouse across the stage. I can easily capture the points on MouseEvent.MOUSE_MOVE and store them in a vector and then draw the points as dots:
The problem is that I need to calculate evenly distributed points on an ever growing Vector of points so I can only draw the line between say every 5th point (say using modulus). I have been battling away with Bezier curve equations both Quadratic and Cubic but still can't quite figure out how to convert my Vector of points into an evenly distributed Vector of Points without sucking the life from the CPU.
View 1 Replies
Aug 26, 2010
We've got an Illustrator file with something over 1,000 layers. We're trying to import this into Flash and keep the layer names intact, such that they become the names of the movie clips that are imported for each layer and can be used programmatically. (It is a diagram and arrows, boxes, etc all have callout names that will eventually allow them to link to a database.)As near as I can tell, the Import dialog will NOT pass this info across between the two parts of the dialog.
View 1 Replies
Mar 20, 2011
I started a thread about a reference to a symbol House, in the output window, which was: House_1. A lot of people said some useful things about that. All day I've been thinking about it, and I came to the conclusion that I don't understand things, at a very basic level.
Consider:I make a movieclip which I give the Symbol name Drawer. (I don't export it for AcitonScript.)On the stage I manually place two instances of this Symbol. The first one I give the Instance Name drawer (in the properties panel). The second one I leave nameless.Now if I trace the names of both these clips, by
trace(this.getChildAt(0).name);
trace(this.getChildAt(1).name);
the output window gives me
drawer
instance2
Now I know that the so-called "instance name" which I gave in the Properties Panel (drawer) is, in reality, a variable name which Flash gives my first instance behind the scenes. And instance2 is a name that Flash gives my second instance. What exactly the nature of that name is, I do not know.My point is: both names (drawer and instance2) are the .name property of these movieclips. Otherwise I could not have traced them through asking for the .name property, in the above. Yet only the first of these two can be manipulated:
drawer.x can be set;
instance2.x can (as we know) not be set.
But...why? What is the real difference between these two kinds of names? How can they both be the .name property of their underlying movieclip, yet be of such a different nature? What IS the nature of the instance2 name? If it's a String, how come the .name property of one movieclip can be a variable name, while the .name property of another (but identical) movieclip is a String?
I've searched every bit of web page on the net I could find. But it looks as if nobody addresses this issue. We all just work with it - but it makes no bloody sense. A name property = a name property, you'd think. Whether Flash set it or I set it should not make a difference. The x property of a clip, for example, does not change in nature according to who set it - me or Flash.So, again, just to emphasize the problem: how can a property (the name property) of a movieclip change in NATURE depending on who set it? After it's been set, shouldn't the name property of a clip be of exactly the same nature as the name property of another clip?
View 8 Replies
Aug 7, 2009
I'm using Flash CS3 and want to create a custom ComboBox. I've followed the steps outlined in "Editing component skins in a new document" (http:/[url]...), but every time I get to the step where I drag the ComboBox Assets folder from the HaloTheme.fla library into my library, if I test movie at that point my combobox has become an unclickable white rectangle with no label, button or anything.
View 2 Replies
Nov 8, 2010
I'm trying to set a specific list item in a mx combobox to have a custom item renderer, the problem is that I cannot do this via mxml, it needs to be done via actionscript at a later stage, eg: combobox gets created, combobox gets populated, user does other tasks, combobox needs to set one or more items in the combobox to have icons (via item renderer)..
I can do this via the onChange event, but it only applies the icon when the combobox is opened and there is a slight delay so you can see the icon being added.
View 1 Replies
Mar 16, 2011
How can I validate there's a selected item in a ComboBox before saving? If there's no selected item, how can I set focus on the ComboBox?
View 2 Replies
Dec 8, 2008
**Warning** The linkage identifier 'ComboBox' was already assigned to the symbol 'ComboBox', and cannot be assigned to the symbol 'GUI MC/Combo Boxes/abc', since linkage identifiers must be unique.**Warning** The linkage identifier 'ComboBox' was already assigned to the symbol 'ComboBox', and cannot be assigned to the symbol 'GUI MC/Combo Boxes/def', since linkage identifiers must be unique.
Both of my ComboBoxes has the same identifier.I could not change the identifier through the properties tab because it is greyed out.
View 5 Replies
Mar 10, 2010
I have brought in an XML document into Flash (AS3), and can pull any string that I need to into the output window. That is all fine and good - but what I need to do is set var values to be used later.
Here is the simple XML:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<config>
<setting type="buffer">5</setting>
[Code]....
This outputs what I want, but the problem is: if I try and trace newVar our assign another variable the value of newVar outside of the processXML function, it isnt there.
View 4 Replies
Jul 21, 2010
I am trying to create a mindmap where the user can drag points about the screen. I have gotten as far as drawing the line via actionscript, and drag+drop the points (defined as movie clips on stage). This is the existing script - I don't know how to get the lines to follow the points. Something to do with ENTER_FRAME or updateAfterEvent?
var line:MovieClip = new MovieClip();
line.graphics.lineStyle(1,1);
line.graphics.moveTo(ptOne.x,ptOne.y);
[code]....
View 1 Replies
May 31, 2009
how to get this to work, but I've finally gotten Loadvars working dynamically. However, now I need to take the "avatar" variable and use it to populate a list component. I keep reading dozens of different ways to do it - turn your variable into an array in Flash, etc. What is the best method?
View 6 Replies
Feb 1, 2010
So I have a list box on stage with the instance name "lb" I'm trying to get some text from my xml list into this list box? In this case the @TITLE data.
I'm able to trace the data from the xml file into the output window, but I can't figure how to display that text in the list box.
[Code]...
View 2 Replies
Feb 6, 2007
Why is this not populationg the fiedls with images? The XML is well formatted (I tested)myThumb has a Loader called myPicMC, where the pics are supposed to load. I supposed the proble is with the code in bold blue. [code]
View 2 Replies
Jul 14, 2009
I am creating a RSS Feed application based on a data, and I have the following:
I have an ArrayCollection that is pre-populated with data. I am sorting through the ArrayCollection, get 1 piece of data (condition), and need to connect to an RSS feed which returns me the title, and I set my ArrayCollection in correspondence to condition -> title.
public function updateArrayList(list:ArrayCollection):ArrayCollection {
trace(list);
for(var i:int = 0; i < list.length; i++) {
//Alert.show(list.getItemAt(i).condition);
[Code]....
View 1 Replies
Jul 1, 2010
I have have a problem loading and accessing data from a value object in my new project.. I load an xml file via a service, which contains title and locations of asset files, I need to be able to access the location of an asset file by specifying the title and retrieiving it from a value object.. I'm using the Robotlegs framework, here's an example of the xml:-
<?xml version="1.0" encoding="utf-8" ?>
<files id ="xmlroot">
<file title="css_shell" location = "css/shell.css" />
[code].....
View 1 Replies
Jul 13, 2010
I'm trying to wrap my brain around getting data into my project in a way that I can use.. I want to use MySQL & PHP my Flashbuilder app and I'm not populating a datagrid so......
For simplicities sake, In my database table I have 3 columns "ID, Title & Content". I want to use this to populate the different states in my flashbuilder project.
Normally in a web page I could say in the sql statement "SELECT * FROM table WHERE ID = 1" to get the first row of info and I could put my Title and Content where I want them on my page I can change the query to "SELECT * FROM table WHERE ID = 2" to populate page 2 to get it's title and content.
In flashbuilder it all on the same page and I'm not understanding how to populate a singular text field for a title or content area with a single field from the database.
View 1 Replies
Sep 21, 2010
my required tree structure is as follows
[Code]...
where the component before / represents parent and the children of the corresponding parent are separated by , Can anyone provide me the logic to create a array collection for this hierarchy to set as dataprovider to my tree.
View 1 Replies
Oct 31, 2010
In the below code.If buttom 'A' is pressed the text box should be populated with A, and if button 'B' is pressed it should be populated with B and so on..
s='A';
for(i=0;i<button.length;i++)
{
txtLogin.text+=s;
[Code]....
View 1 Replies
Dec 22, 2010
When receiving an array from flash, in C, how do I populate that array when its size isn't constant but the values types are?
In Alchemy's documentation, the example given is:
S3_ArrayValue(arr, "IntType, StrType, DoubleType", &arg0, &arg1, &arg2);
But this means that if I my array is of size 100, I need to create a string describing each of the cells types.
Isn't there a way to populate it by saying something like "fill the following 'int * array', with the first 100 value from this AS3_Val int array?"
View 1 Replies
Oct 7, 2011
What is the best way to populate a multiple Comboboxes when using Flex 4.5 and PHP 5?
I am developing a Flex app that displays about 20 Comboboxes on the screen - each combo showing different data. I would like all of the comboboxes to be populated at once when the app starts. I used the default "Data/Service" wizard in Flex that automatically creates the PHP that returns an ArrayCollection to Flex. For example, below is the current PHP function I use that populates each ComboBox:
public function getListsByCODE($code) {
$stmt = mysqli_prepare($this->connection, "SELECT a.IDCODE, a.CODE, a.DESCR, a.NOTES FROM DROPDOWN_VW a WHERE (a.CODE = ?)");
$this->throwExceptionOnError();
[Code]....
View 1 Replies
Oct 2, 2009
I am currently trying to write a simple class that handles form validation with a backend script, how the backend script works is that you POST a variable type and it's value and an XML is returned with any errors. The problem is, I want to be able to dynamically generate the variable names so that they don't have to be hard coded into the class. Is this possible?for example:instead of
ActionScript Code:
var urlVariables:UrlVariables = new UrlVariables();
urlVariables.first_name = "foo";
[code]......
View 2 Replies
Apr 25, 2010
I've got the following in an .as Class file called PIX, there is another .as Class file for the Sprite object 'px' that contains a dynamic textfield called pxText I'm trying to populate with the value of the variable 'j'. here's the code I got to work:
Code:
public function init():void {
pxRow = stage.stageWidth / 10;
for(var j:uint = 0; j < pxRow; j++) {
[Code].....
View 3 Replies
Feb 28, 2011
I'd like to populate a datagrid from an array I created from an external text file. The array looks like this: 422239;24H.SE;20100507;1;1;0.00,I'd like to use the second to sixth item to populate the grid, but I have no clue how to get into a datagrid since it has the array data has no colums or names
View 9 Replies
May 22, 2011
private var _initVector:Vector.<uint> = new Vector.<uint>(8, 4, 1, 3, 2, 6, 7, 0, 5);
View 2 Replies
May 30, 2011
I'm trying this for creating and populating a 2D Vector of Integers:
Code:
var vector2D:Vector.<Vector.<uint>> = new Vector.<Vector.<uint>>
[
new <uint>[1, 2, 3, 4, 5, 6, 7, 8, 9],
new <uint>[10, 11, 12, 13, 14, 15, 16, 17, 18]
];
And well, that's not working...For this program I'm working on I'll also need to declare and populate a 3D vector.
View 9 Replies