In the below code.If buttom 'A' is pressed the text box should be populated with A, and if button 'B' is pressed it should be populated with B and so on..
s='A';
for(i=0;i<button.length;i++)
{
txtLogin.text+=s;
[Code]....
First project using flash and im having some problems with a combobox function im trying to apply. I have a combobox that I hope when selected populates an input text box on another frame. When I test when the input text box is on the same frame the code below works and the selection is shown, but i want to show the input text field on another frame and this doesnt work.
myCombobox.addEventListener(Event.CHANGE, myHandler);
function myHandler(evt:Event):void{
selectedLabel.text = myCombobox.selectedItem.label;
selectedData.text = myCombobox.selectedItem.data;
selectedIndex.text = myCombobox.selectedItem.index;
}
I have the following code to populate a dynamic text box:
Code:
myData = new LoadVars();
myData.onLoad = function() {
trace ("The text box before autosize is: " + sailing_txt._height);
sailing_txt.htmlText = unescape(this.myVariable);
sailing_txt.autoSize = true;
trace ("The text box after autosize is: " + sailing_txt._height);
};
myData.load("sailing.txt");
The output of this is:
The text box before autosize is: 388.25
The text box after autosize is: 712.5
My problem is that I need to get the autosized height instead of the regular height of the text box before autosize. In a parent movie clip I have the following code to do some custom scrolling:
Code:
contentHeight = _parent.scrolledMC.sailing_txt._height;
trace("The content height is: " + contentHeight);
The output of this is:
The content height is: 388.25
So it's getting the size of the text box before it's autosized.
I am creating a RSS Feed application based on a data, and I have the following:
I have an ArrayCollection that is pre-populated with data. I am sorting through the ArrayCollection, get 1 piece of data (condition), and need to connect to an RSS feed which returns me the title, and I set my ArrayCollection in correspondence to condition -> title.
public function updateArrayList(list:ArrayCollection):ArrayCollection {
trace(list);
for(var i:int = 0; i < list.length; i++) {
//Alert.show(list.getItemAt(i).condition);
[Code]....
my required tree structure is as follows
[Code]...
where the component before / represents parent and the children of the corresponding parent are separated by , Can anyone provide me the logic to create a array collection for this hierarchy to set as dataprovider to my tree.
What is the best way to populate a multiple Comboboxes when using Flex 4.5 and PHP 5?
I am developing a Flex app that displays about 20 Comboboxes on the screen - each combo showing different data. I would like all of the comboboxes to be populated at once when the app starts. I used the default "Data/Service" wizard in Flex that automatically creates the PHP that returns an ArrayCollection to Flex. For example, below is the current PHP function I use that populates each ComboBox:
public function getListsByCODE($code) {
$stmt = mysqli_prepare($this->connection, "SELECT a.IDCODE, a.CODE, a.DESCR, a.NOTES FROM DROPDOWN_VW a WHERE (a.CODE = ?)");
$this->throwExceptionOnError();
[Code]....
I'm having a problem displaying data from a function to text box within a tab. If you run the code and click "Select Tab 2 and Fill..." I get an error; "TypeError: Error #1009: Cannot access a property or method of a null object reference." I'm guessing this is because "Tab 2" is/was not rendered yet. Now if I run the code, select "Tab 2" then select "Tab 1" and click "Select Tab 2 and Fill..." it works the way I would like. Dose any one know a way around this problem.
[Code]...
I am passing a complex object from my .NET library to my Flex application via WebOrb.In order to automatically translate, I am using the [RemoteClass] meta data tag as follows:[code]This works absolutely fine, until I try to extend the Plan class to contain an array of complex items:[code]but the set function never gets called.What can I do to get the children into my Flex app in this way?
View 1 RepliesI have a datagrid:
<mx:DataGrid id="resultsDataGrid"
height="328" width="604" paddingRight="0" editable="false" y="43" horizontalCenter="0">
[Code]....
I only need the Title and Updated fields to actually be loaded into the DataGrid. This clearly doesn't work, (I think it's related to result.entry, that it must be something else like result.feed.entry, but I've tried a number of combinations and they haven't worked
I'm having trouble getting an AdvancedDataGrid to populate properly within an app I'm working on.If I use the sample code found on this page http:[url].... in it's own page everything works fine but if I copy this code into the page within my app that needs to have the grid the column headers/data are not populated.The page that needs the grid is displayed within a Spark NavigatorContent element, I'm not sure if this could somehow adversely effect the AdvancedDataGrid behaviour.I've even simplified the contained page to have just the sample code without anything else and it still does not work. info needed here,
EDIT: Some code sample from the project:
//Code from 'main page' containing the NavigatorContent
<mx:ViewStack id="viewstack1" cornerRadius="12" dropShadowVisible="false">
<s:NavigatorContent label="Matrix View" backgroundColor="#FFFFFF">[code]...............
In ActionScript I have string as
str="subject,r1,r2:a,b:1,2:3,4";
Dynamically I have split this string and build array collection as given below
arraycoll.addItem({subject:a ,r1:1,r2:3});
This example of one set. The array collection should be built dynamic. I have tried but not successful.
I am trying to figure out how to manage a Datagrid based on an XML object like this:
[Code]...
I will need to populate the Datagrid column names based on a different XML object and use the above XML to populate each of the column's rows. I currently am able to create the Datagrid and populate its column headers but I am unsure as to how to how to add the rows for each column. The above XML will be update with new row and column elements added and deleted. This, of course, will be bound to the Datagrid to show updates.
I have an XML file with this data.
<resultSet>
<MerchandiseAssortmentCategory>
<merchandiseAssortmentCategoryId>275</merchandiseAssortmentCategoryId>
<merchandiseAssortmentCategoryName>D21 Plywood</merchandiseAssortmentCategoryName>
<merchandiseSubordinateClass>
[Code]...
When i run this, only the category name is filled. the subordinateclass number is just blank.
I have some button code on frame one. that looks like this:
[AS]on (release, keyPress "<Enter>") {
mylogin = new LoadVars();
mylogin.password = password;
mylogin.username = username;
[code]....
basically sending and recieving variables from a php page. I want to be able to specify what my textbox on frame 5 says in the onLoad statement. Is this possible?
Currently the only way I have been able to get the text to display is either to use the textbox variable and declare that in the onload statement, or to put textbox.text = mylogin.message; on the actual frame.I doubt there is a way to do it, because the actual textbox hasn't be created yet, but if there were a way, that would be nice.
how to kill focus from a textbox as the mouse is clicked outside the textbox?
View 4 RepliesI have some button code on frame one. that looks like this:
[AS]on (release, keyPress "<Enter>") {
mylogin = new LoadVars();
mylogin.password = password;
[code]....
basically sending and recieving variables from a php page. I want to be able to specify what my textbox on frame 5 says in the onLoad statement. Currently the only way I have been able to get the text to display is either to use the textbox variable and declare that in the onload statement, or to put textbox.text = mylogin.message; on the actual frame.
I am trying to use the load method of FileReference object to load the data and use it to display a thumbnail of the selected image.However, after calling fr.load(), fr.data remains null.I'm using Flex Builder 3.0.2 on Windows 7 with Flex SDK 3.4 and Flash Player 10 Debug. If I evaluate fr.load() in Eclipse's watch variables list, I get an error reading "No such variable: load."
View 4 Repliesi have 2 set of textbox, 1 set of the text box contain 6 textbox and the other set of text box contain 12 textbox. how do i make it like for the first set of textbox to compare with the second set of textbox? eg. 1textbox1.text = 2textbox1.text and the first set of textbox right, each of the 6 textbox have to compare with second set of textbox which is 12 textbox.
[Code]....
In the following working example the list's selected index is supposed to reset to 0 whenever the text box changes. However, for some odd reason every other keystroke the selected item disappears and then reappears at the subsequent keystroke.
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="[URL]"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600">
<fx:Script>
[Code] .....
in my flex 3 application i have 5 fields with textboxes...im using datagrid for those fields..for edit and update process i want the data should show in thier corresponding textboxes when a row is selected in datagrid.
View 1 RepliesI am looking for a auto suggest TextBox in flex.
When i type a character, a drop list within the textBox should display with matching words with the character that i have typed. please provide if have any example.
i am trying to do this After you type in textbox A (eg." HAHAHA")And when you pressed a button "submit_mc""HAHAHA" will appear in textbox B i know it involve strings , but i tried my best but i cant figure out
View 2 RepliesI'm trying to create a simple "smart" textbox component in Flex, and I want a function inside it that I can use outside of the component to force itself to select all text inside of it.
Inside my SmartTextbox.mxml:
public function selectAll():void
{
this.setSelection(0, this.length);
}
[Code]....
I have tried to work on a simple form with Flash Builder 4, but was stuck in creating the dynamic addition of the instance for a textbox and combobox within a Hbox.I have created an HBox component with a textbox and a combo box. I then create a button Add new Row, to add a new row of Hbox on the runtime.
May I know how can I create the add to make it able to add new hbox component on clicking of the button, such that when i click the hbox 3 times, I should have 3 rows of the component instance and the button is still at the bottom of these components?
I have a series of editable text areas in which I want to be able to add a variable on the click of a button.
If I click the button the textarea loses focus and so I cant code which textarea I need to add the variable into. Can anyone think of a way of keeping focus on the textbox, inserting the variable and then allowing the user to carry on typing.
I've been playing around with the setFocus function trying to get this to work with no success.
Here is a snippet of my code:
public function addFirstName(myText:string):void{
myText = myText + "<<firstname>>";
}
<mx:TextArea id="txt1" change="text1=txt1.text" text="{text3}" editable="true"/>
[Code].....
i have following xml
<?xml version="1.0" encoding="UTF-8" ?>
<Users>
<User>
<ID>SMSUser(63)</ID>
[CODE]...
How can i show Email in textbox when user select any item in the grid?
i have ade moultiple textbox at run time now i want to delete a textbox by delete key how it is possible .
View 4 RepliesI have brought in an XML document into Flash (AS3), and can pull any string that I need to into the output window. That is all fine and good - but what I need to do is set var values to be used later.
Here is the simple XML:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<config>
<setting type="buffer">5</setting>
[Code]....
This outputs what I want, but the problem is: if I try and trace newVar our assign another variable the value of newVar outside of the processXML function, it isnt there.
how to get this to work, but I've finally gotten Loadvars working dynamically. However, now I need to take the "avatar" variable and use it to populate a list component. I keep reading dozens of different ways to do it - turn your variable into an array in Flash, etc. What is the best method?
View 6 RepliesSo I have a list box on stage with the instance name "lb" I'm trying to get some text from my xml list into this list box? In this case the @TITLE data.
I'm able to trace the data from the xml file into the output window, but I can't figure how to display that text in the list box.
[Code]...