ActionScript 3.0 :: Possible To Resize A Container?
Aug 28, 2009I want to resize a container,, but i don't want to resize the container content: what should i do?
View 4 RepliesI want to resize a container,, but i don't want to resize the container content: what should i do?
View 4 RepliesI have a stage with Top, Middle & Bottom Movieclip's set on it. On resize the content is scaled to fit and maintain the correct proportions.I am loading each content (page) in as external SWF files into the Middle container using a Loader and URLRequest.Here is my onCompleteHandler function:
Actionscript Code:
function onCompleteHandler(loadEvent:Event){ // Remove Preloader middle.removeChild(preload); content =
[code].....
What I want to accomplish is to resize an external SWF so that it fits into the display object that is presented as a container on the stage. For now it show up outside of the container.
Important: I do not want an external SWF to occupy the whole stage; I have a special place (that container) for it on the stage.
I have a hairy case here: I need to load from a menu different SWF's (same width/different heights). What I need after this: resize the height of the container box (a movieclip). I have how to explain better all the stuff and post some AS too
View 6 RepliesI have a flash animation with the size of 1280x1024 and I want to embed it into an HTML file. I want the flash file to be displayed in 800x600. This is my code:
<html xmlns="[URL]" xml:lang="en" lang="en">
<body align="center"><object>
<param name="movie" value="/flash/connect.swf" />
<embed src="/flash/connect.swf" width="800" height="600"></embed>
</object></body></html>
Well, it doesn't work. I do have a 800x600 frame, but the flash file itself still displayed on its original size.
I have a window witch is resizing on creationcomplete phase according user preference. This part woks well. But inside this window a s:Group (maincontainer2) exists and even if width and height is in percent, the s:Group size is bigger that the new window measure.
<?xml version="1.0" encoding="utf-8"?>
<windowSkin:wCustomWindow xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
[Code].....
I'm using the following code to load a .jpg into a movie clip container the problem is I need the container to be a specific size I tried loader.content.width = 50; and loader.content.height = 50; the height part works but the width doesn't work my image just expands beyond the stage width.How do i set the size of the movie clip container?I don't care if the image gets distorted i have a resize script for the images before they are loaded into flash.[code]
View 1 Replieslets say i have 2 classes in the same package.and i add the same event listener to each of them, for example i add event.resize to some display object container in both of them.how can i prevent the code attached to that listener to execute in one of the classes if that event happens?
View 2 RepliesI would like to know how possible it is to undo/redo the resize of the the textflow container through an EditManager?.For example I manually reset the size of the textflow through ContainerController.setCompositionSize(w, h), and then I would like to undo the resize?
View 0 RepliesHow to make a container/Movie Clip dynamically resize such as the effect employed in this site (animations included): [URL]. Furthermore, is it possible to have images load from an XML file and contain the information needed to have the container/Movie Clip resize accordingly.
View 1 RepliesIs there an easy way to make a parent container (eg Group) resize when it's children resize?
Below is a little example app. When I put the 200x200 'food' in the 'stomach' the stomach & it's containing 100x100 'body' should resize to contain the food.
[URL]
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
[Code]....
I'm trying to create a Flex application that can automatically shrink based on the size of the components that it contains, so that a user can shrink it to a minimal view to see more of the HTML page it's embedded in.
I know how to change the size of the whole application using ExternalInterface, but I'm having trouble automatically figuring out how much the size changed when something is hidden or shown.
For example:
Let's say I have the following flex layout:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical">
<mx:VBox width="100%" paddingTop="0" paddingBottom="0"
[Code]....
How can I hide one of the text fields and cause the VBox to shrink? I'm currently setting it to visible = false, but that doesn't seem to affect the parent VBox.
Once the VBox shrinks, how can I detect that the Application no longer needs so much space, and then go about figuring out how much less space it needs?
I've tried using ResizeEvent, but I haven't been able to get them to work, but I could be doing something wrong.
I am creating a component that displays a variable amount of "gauges" (square tiles of content if you will), that is laid out like so:
<HDividedBox id="container">
<VBox id="myComponent">
<HBox id="header">
[code]...
I've got a simple script that resizes a loaded image to fit a specific width and height, however I want the option to be able to fill i.e. centre and crop to a specific width/height - any ideas on how I can modify this?
Current script:
[Code]...
this is my code:
[Code]...
as you see the container._height is bigger than the maxh (maximum height) but the _width is just fine... how do i fix this problem??
I am working on an Adobe AIR Application. The size on Application window is 800X600 and is contains border container and border container contains many controls. What I want is to if user re-sizes the application then that container should also be re-sized according to scale. i.e If user maximizes or minimizes the window then that border container should also be maximized or minimized respectively.
View 3 Repliescan I resize a display object (container) without its contents (children) are resized?
For example, in the following code when I resize the green square, red is also resized. I wanted to resize only the green.
ActionScript Code:
import flash.display.Sprite;
var sprite:Sprite = new Sprite();
sprite.graphics.beginFill(0xff0000);
[Code].....
In a Flex Mobile project I have a simple itemRenderer where I'm trying to create an "bubble" texting effect, similar to ichat or iphone (just so you get what im going for). But if the text is longer than the screen it runs off, rather than just going down a line.
If I set Group thats holding the rectangle(to create the bubble effect) and the label to 100% it works and keeps it from exceeding the list containers bounds, BUT the group is always at 100% and looks bad, I'm trying to keep the "bubble" JUST AROUND the text.
Anyway so, at the top of my itemRenderer I tried specifying:
<s:ItemRenderer xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark" width="100%" height="100%">
And here's my layout I figured since msg_container has a width of 100% I was hoping bubble_lable_group would just not exceed that but...it doesnt...it just runs off. I tried setting a max width but that does not allow you to input percents. And just to say it 1 more time. I know if i set bubble_lable_group width to 100% it works, and keeps it from going off the edge, but then the rectangle "bubble" stretches all the way across and just looks bad.
<s:VGroup id="main_container" horizontalAlign="left" paddingBottom="10" paddingTop="10"
verticalAlign="top" width="100%">
[Code]....
I am facing a issue in Flash container. I am having a project which has main container which call different SWFs into it. Now I call this main container file into another container, and their problem starts. Many option doesn't work properly which generally have _root, _parent etc...
If I want to run project (main container SWF and child SWFs) into another container file which place on a website. I want to show whole project from this container file so what I need to do?
I have a loop that goes through data from a book and displays it. The book is not consistent in it's layout so I am trying to display it in two different ways. First way(works fine) is to load the text from that section in to a panel and display it. The second way is to create a new panel (panel creates fine) and then add collapsable panels(nested) to that panel. Here is the code from the else loop.
else if (newPanel == false){
// simpleData is just for the title bar of the new panel
// otherwise the panel has no content
[Code]....
The error I get is: ReferenceError: Error #1069: Property panel4.4 not found on components.readTest and there is no default value.
I have tried setting the "name" property instead of the "id" property.
I have a viewstack container w/ 3 views: red, black, and blue. How can I completely hide the black & not include it?
[Code]...
I am creating an flex Air project,so mxml file will run. I have circles in one Big circle at one side and will be same on other side.
Now how to drag any circle from any Big circle to other side. Or it could be like any two container having circles, then how to drag and drop circle?
For one circle i am able to do drag and drop.But I want one Big circle on left hand side and one big circle on right hand side .And small circles with class names will be in these big circles.Now i want to drag and drop those small circles in big circles.Big cicles should not move. Even i have tried this code in actionscript
package
{
import flash.display.Sprite;
import flash.events.MouseEvent;
[Code].....
But in this i want big circles should not move and small circles should only be dragged.
I need to place an image into a container. The problem is that I will not know the size of the image or the container beforehand, so it all has to be dynamic.this is how I started (have not gotten to stage(or container) changing size yet. No matter what I try, either all the images are the same width, or they are all the same height. If some images are portrait and other landscape, I don't want all the images to be X pixels high. In this variation of the code, all the images turn out the same height, regardless of portrait or landscape.
ActionScript Code:
var ratio:Number = container.width/container.height;//get the ratio, if width is bigger than height then ratio is greater than 1, else ratio is smaller than 1
[code]........
I'm currently working on a custom component which extends Canvas (let's call it SuperCanvas) ; it's basically a container that let you zoom & pan its contents. It would be too long to explain why, but I can't use scrollRect, so I was forced to declare a Canvas object (called innerCanvas)... inside my SuperCanvas (I know, not very nice =/) I would like to know if there's a proper way to "redirect" the creation of my component's children in this canvas.
[Code]...
I am working on image and i like to scale or resize the image by dragging and resize option.same working as "free transform tool" in flash (design part); i need same functionality in application.
View 7 RepliesI'm having a bit of a problem here. As per the title, my flash swf file works fine when tested from the IDE, but when I publish it and open it through the browser, the stage doesn't seem to resize along with the window.I post below a bare-bones example. The "back" movie clip should resize, only it remains at the starting dimensions
Code:
import flash.events.Event;
import flash.display.MovieClip;
[code].....
I have Buttons which I have rotated vertically within a Canvas, that is working fine. The problem occurs, when the user resizes the window to a small size a vertical scroll bar appears, I would rather have each button squashed upto a smaller size.
<mx:Canvas xmlns:mx="http://www.adobe.com/2006/mxml" width="40" maxWidth="40" xmlns:myComponents="myComponents.*"
horizontalScrollPolicy="off"
[code].....
I'm having a little issue with the resize event and resize effect of a VBox.
I have something like this:
<mx:VBox id="container"
backgroundColor="0xFFFFFF"
backgroundAlpha=".9"
paddingTop="15"
paddingLeft="15"
[Code]...
I have a main movie here that loads in an external swf through a container mc. everything is aligned and positioned to where it should be, and they are also set to that value onresize. the problem is, when my swf is loaded in, it works fine and is in the right position, same when you resize it. BUT, if you resize the window before the swf is loaded, it misaligns, until you resize!!
View 2 RepliesI have a datagrid that occupies 100% of browser screen. I want the grid to automatically resize when the browser is resized to small or full screen.
View 1 Replies