I am making a small website and i am trying to stop the sound from a video playing when the user clicks any other button to navigation away from the video which is fine (SoundMixer.StopAll behind the code for each of the buttons) but then if they decide to go back to the video page there is no sound? I tried removing the event listener but i cant get it to work
View 3 RepliesI am creating an animation with very few controls for a presentation and it requires adding sound. I have my intro in the first frame with one sound and then want the user to click anywhere to start the animation and another sound.The problem I am having is sound control.No matter what I try the sounds overlap. I have managed to stop the first sound when going to the next frame - the animation, but the second sound now will not start. The first sound is called in from the library with the below code:
var snd = new Sound();
snd.attachSound("Tune");
and stopped when going on the next frame with:
[code].....
I wish to be able to play a voice sound every 3 minutes. I have the sound in "mp3' format and need to repeat the message every 3 minutes.
[Code]...
The actionscript 3.0 I wrote makes the sound once but that's it. I have the "Loop" on but it only runs once. I need a Timer also but until I can get the sound goes its a mute point.
I need to produce a photo review show (basically, a photo slide show), which incorporates still photography, and numerous video clips. We will have music playing in the background (not on the timeline - in the actionscript). The full presentation will run automatically - no user interaction, and therefore, I need the background music to automatically fade out when the video starts, and then fade back in when the video ends.
1. Is Flash CS5 the correct software to do this in?
2. code to tell the sound to fade out when the video starts, and fade back in when the video ends?
Need to make a character start to talk when the sound starts and stop talk when the sound stops so I'm using this:
[Code]...
I am trying to stop one specific mp3 file that plays throughout the whole document. But I don't want to use the off and on button. Instead when I press one of the pop-up buttons, I want a new sound to start in the pop-up window.
How do you stop the current sound that is playing and start the one on the pop-up? My main question is, is there a code that will stop current mp3, and start a different sound when the pop-up window is activated.
How can I start and stop sound by using actionscript 2.0?
View 1 RepliesIn this tutorial [URL] it shows how to start a sound, and I got that down, but using a seperate button, how do you stop the sound? I cant figure that out.
View 2 RepliesPHP Code:
import flash.external.ExternalInterface;
snd = new Sound();
[code].....
im making a flash animation with a background two sets of text an invisible button and a song. im trying to make the the animation start when the mouse rolls over and have it stop and reset to the beginning when it rolls out. on my invisible button (first layer) i have
on (rollOver) {
play();
}
[code].....
I'va any troubles in controlling sound in an external swf. I need to stop/play/pause it. I've put the sound file on the timeline of the external swf and I want to control it from tha main movie in wich I've load it. the swfs are made using AS2.0
View 2 RepliesI am trying to create a sound button to start a sound and then stop it when clicked again. I thought it would be easy because there is a code snippet for "click to play/stop sound"
I have my sound file in my library.
Below is the code that is not working:
Instructions:1. Replace [URL]below with the desired URL address of your sound file. Keep the quotation marks ("").*/
CYOA2bttn.addEventListener(MouseEvent.CLICK, fl_ClickToPlayStopSound_11);
var fl_SC_11:SoundChannel;
//This variable keeps track of whether you want to play or stop the soundvar fl_ToPlay_11:Boolean = true;
Proxy-Connection: keep-alive Cache-Control: max-age=0 Cp>function
[Code]....
I'm trying to get right. Essentially I want the beeping sound to loop infinitely while there are no pauses in the writing of the text, but I want it to stop once the last loop that was going when a pause in the writing started has finished, and then start up again when the pause ends.Now I could just easily set the loop to stop once a pause starts, but then there is the chance of stopping the loop mid-sample and making the pause sound abrupt, and I don't want that to happen.Now please watch the current swf:And please read my script for better understanding
View 7 Repliesi know this is a problem allread often talked about, but i cant solve it.i want to start and stop a sound with a mouseclick event.the problem seems to be that the click event is never triggered. can anyone see why?
[Code]...
I realize this is probably an old thread, but does anyone have an actionscript example of how to create a custom start and stop time for a Flash video? In other words I'd like to be able to "bracket" the play time of a Flash video with custom start and stop times rather than start at the beginning and end at the end.
View 1 RepliesI'm wondering how I can make a Flash start playing a video on MouseOver, and stop playing on MouseOut.
View 1 Repliesim currently building a site with 3 buttons and each buttons loads an external swf for each section of the site on a empty movie clip, im having an issue with the video section that has an video thumb gallery loading flv videos,
every time i try to go somewhere else in the site, the video sound continues to play (loop) behind the scene.
this is the actionscript code im using for my buttons.
[Code]....
I have a flash video (.flv) that auto plays upon page entry... and the user also has the ability to view a second video (by clicking on link on webpage)... it opens a SOLIDBOX (similar to floatbox) window and plays the second video... which is great.
But unfortunately the AUDIO/Video from the initial video (behind solidbox POP UP) is still playing. A savvy user would realize this and stop the other video, but unfortunately, to make it user friendly for our customers, we need it to automatically stop the initial video.
How can this be accomplished? How can i stop the initial video when the link on the webpage is clicked (opening the pop up with second video playing)?
You can see this all in action here:[URL]
(notice the video upon entry starts playing... then click on the yellow starburst (DEMO GREETING linK) to open the second video)
I am loading swf's that have an flv embedded on the timeline. When the user selects from the menu I unload the swf and load another. This is working fine, but the audio from the first swf's video keeps playing. How can I kill this first videos audio track?
View 3 RepliesI'm building a site that has an mp3 player that's available all the time.I'm adding a video page to the site.The videos use an FLVPlayback component.When I leave the video page I want the sound that was playing on that video to stop.I can't use SoundMixer.stopAll() because if I had the mp3 player playing before I went to a page I want it to keep playing.
View 5 RepliesI want to stop my background music(audio) from playing when i click on a button which loads video[code]...
View 0 RepliesSo I made a few buttons with sounds within them and when I publish it they work just fine. But what I want them to do is;
Say I click a Button.The sound starts playing.Then I click it again, before the sounds done playing.I want it to stop the playing sound and start playing the button I just clicked on, whether it be the same button, or a different one.Right now it just ends up sounds like an echo because it'll play it as many times as you click it.
I'm trying to figure out how I can make the sound file that I load into Flash start at x seconds and end at x+30 seconds.So basically, I just want a 30 second sample to play starting at a specific time position. Does anyone have any advice on how to do this or have links to somewhere I can read up on it?
View 4 RepliesI made a webiste with bg sound home, portfolio, gallery, contcts. This are the links. when click portfolio, which contain a flv file, when clicking the flv file bg music stop and video will play smoothly.But if i navigate to other links the sound from the flv remains their and my bg music not playing also.. one code SoundMixer.stopAll(); i got this code b4, it vil stop all sounds... i dnt need to stop the background music, i need to stop only my flv video sound.. there's a bg music playing, when entering to the portfolio section thers a flv video vth sound. i can stop all other sounds ven playing this flv video but i cant stop this sound ven navigating to other sections and i need to continue the bg sound ven navigating to other sections...
View 1 RepliesI've been making the transition from AS2 to AS3 for the last week and am making progress. But I'm having a problem that hopefully someone can help me with. I'm using Flash CS5. I have a fairly simple Flash website I'm working on. I have sections on the timeline like Home, About, Photos, Media ... all set up using labels for each of those sections. Everything is working fine but when I go to my Media section where I have a video placed (using the flv component) I'm having a problem as follows:
The video auto plays fine when I go to the Media section but when I attempt to leave the section and go to another the sound of the video doesn't stop. It continues to play when I go to another section and if I go back to the section it starts again. The video is not there when I go to another section which is the part that's confusing me. In AS2 when I did this the video and the sound both stopped because you went to another section on the timeline. Why is the sound of the video not stopping in AS3?
I am in frame 20 which is playing a video, How do I get it to stop sound and video when some clicks a menu button to go to another frame? Where do I put the code?0
View 3 RepliesI have a problem with my slideshow script. I have embedding a flash video file into my website with this slideshow called monoslideshow, and everything seems to work perfectly. Trouble is, when I am clicking on another menu button that should jump to another frame, it still keeps playing the video and sound while displaying the new menu data.So I will probably need some code that stops the video instantly, when another menu button is clicked. But how do I write it and where do I put it?
Here is my actionscript for the video file to show:
var loaderSlide:Loader = new Loader();
var monoslideshow:Object;
loaderSlide.contentLoaderInfo.addEventListener(Event.COMPLETE, onLoadComplete);
addChild(loaderSlide);
[Code]...
It would be great to get a solution to this problem, otherwise my website will be kinda messy ;)
Here is the action scrip that I created. Correct it if you can.
Process.visible = false;
Cycles.visible = false;
stop();
[Code]....
I have a long mp3 file hosted on a standard apache server (30 minutes long so far, but I would like it to work with longer sounds too).I'd like to start playback of this audio within at a specified point. When attempting to use Flash Actionscript 3, my basic tests show that ALL the audio from the start to the position I choose is buffered before playback (Sound.bytesLoaded was my friend here). If I start one second in, it takes about 3 seconds to start playback, 30 seconds in, takes about 25 secondsObviously with a really long mp3, like skipping playback to the middle of a 3-hour audiobook, this isn't going to be practical.Here's the ActionScript 3.0 code I'm using:
button.addEventListener(MouseEvent.MOUSE_DOWN, function():void {
var s:Sound = new Sound();
var req:URLRequest = new URLRequest("http://example.com/audio.mp3");
[code].....
I'm trying to load sound dynamically into a clip and then play it randomly. The AS I came up with works great if the sound is embedded and I use the .attachSound() method instead of loadSound(). Now, when I load it dynamically and use the code below, the sound plays very fast and at a higher pitch.
Code:
var crows = new Sound(this);
crows.loadSound("Raven.mp3", false);
crows.setVolume(100);
[Code].....