ActionScript 3.0 :: Tweenlite Transition - Moving MovieClip Constantly
Jul 4, 2009
I've tried using tweenlite as a replacement for tweener. In one use I have a mc that I want to constantly move left or right when the mouse is hovering over it depending on position. With tweener I set the x for the tween to be mc.x-20. Using this with tweenlite 'to' just does it once rather then a smooth constant movement(this tween is being repeated through an event listener with mouse_over), 'from' will do what I want, however when the mouse leaves the mc, the mc comes to a halt and performs a tween in the opposite direction by 20 pixels...
I am not sure how to prevent the tween in the opposite direction or have 'to' continue to tween the mc without me having to rehover over the mc again for another tween of 20 pixels... So is it possible to use tweenlite like I had tweener working?
Code:
imageHolder.addEventListener(Event.ENTER_FRAME, updateScroll);
imageHolder.addEventListener(MouseEvent.MOUSE_OVER, rollover);
function rollover(e:MouseEvent):void {
if(scrollc.mouseX>containerWidth/2) {
scrolling="right";
[Code] .....
View 5 Replies
Similar Posts:
Oct 6, 2010
I've been looking everywhere and I don't know what this is called.I'm looking for an effect like this using buttons:I could do this using a lot of '"if"'s, but surely there must be an easier way.
Code:
import com.greensock.*;
import com.greensock.easing.*;
[code].....
View 1 Replies
Oct 27, 2011
I have a vector circle and what to do the following: I'd like to animate it with tweenlite so it looks like a shockwave of an explosion. At first it fades in (from 0 to .5) and gets scaled and when it reaches half of the total animation time it fades out but it still gets scaled (hope you know what I mean). Currently it looks horrible because I don't know how to get a smooth transition from part 1 to part 2 with TweenLite. My animation stops when reaching the end of part 1 and suddenly makes a jump to part 2.
Total time of animation: .75 sec
Total amount of scaling: 5
Code:
part 1 of 2:
TweenLite.to(blastwave, .375, {alpha:.5, transformAroundCenter:{scale:2.23},
onComplete:blastScaleFadeOut, onCompleteParams:[blastwave]});
part 2 of 2:
private function blastScaleFadeOut(object:DisplayObject, time:Number = .375, scaleVal:Number = 4.46) {
TweenLite.to(object, time, {alpha:0, transformAroundCenter:{scale:scaleVal},
onComplete:backgroundSprite.removeChild, onCompleteParams:[object]});
}
View 1 Replies
Sep 3, 2009
I have recently been developing a sailing game and my boat turns with the arrow keys. On the turn i would like to keep the boat constantly moving forward in the direction it faces. What is the simplest way to do this?
(When i rotate the boat to the right/left, i want the boat to move that direction)
View 2 Replies
Oct 26, 2011
I have a vector circle and what to do the following:
I 'd like to animate it with tweenlite so it looks like a shockwave of an explosion. At first it fades in (from 0 to .5) and gets scaled and when it reaches half of the total animation time it fades out but it still gets scaled (hope you know what I mean).
Currently it looks horrible because I don't know how to get a smooth transition from part 1 to part 2 with TweenLite. My animation stops when reaching the end of part 1 and suddenly makes a jump to part 2.
Total time of animation: .75 sec
total amount of scaling: 5
Code:
part 1 of 2:
TweenLite.to(blastwave, .375, {alpha:.5, transformAroundCenter:{scale:2.23},
onComplete:blastScaleFadeOut, onCompleteParams:[blastwave]});
[Code].....
View 2 Replies
Oct 27, 2011
I have a vector circle and what to do the following:
I 'd like to animate it with tweenlite so it looks like a shockwave of an explosion. At first it fades in (from 0 to .5) and gets scaled and when it reaches half of the total animation time it fades out but it still gets scaled (hope you know what I mean).
Currently it looks horrible because I don't know how to get a smooth transition from part 1 to part 2 with TweenLite. My animation stops when reaching the end of part 1 and suddenly makes a jump to part 2.
[Code]....
View 2 Replies
Oct 26, 2011
I have a vector circle and what to do the following:I 'd like to animate it with tweenlite so it looks like a shockwave of an explosion. At first it fades in (from 0 to .5) and gets scaled and when it reaches half of the total animation time it fades out but it still gets scaled (hope you know what I mean).
Currently it looks horrible because I don't know how to get a smooth transition from part 1 to part 2 with TweenLite. My animation stops when reaching the end of part 1 and suddenly makes a jump to part 2.
Total time of animation: .75 sec
total amount of scaling: 5
Code:
part 1 of 2:
TweenLite.to(blastwave, .375, {alpha:.5, transformAroundCenter:{scale:2.23},
onComplete:blastScaleFadeOut, onCompleteParams:[blastwave]});
part 2 of 2:
private function blastScaleFadeOut(object:DisplayObject, time:Number = .375, scaleVal:Number = 4.46) {
TweenLite.to(object, time, {alpha:0, transformAroundCenter:{scale:scaleVal},
onComplete:backgroundSprite.removeChild, onCompleteParams:[object]});
}
View 3 Replies
Aug 24, 2009
[URL] when you have not clicked on all five dots, and you take the mouse of the stage, the interactive line should be deleted(graphics.clear(); ), and the little animation from the start should come back. my idea is to have a counter that ++ every frame, but when the mouse is moving on the stage the counter is constantly sett to 0. when the counter is, for example, 50 the animation i visible. do anyone have any methods that don't give the 50(for example) frame wait? and i would also like criticism and ideas on the rest.
View 7 Replies
Apr 1, 2009
I'm not to experienced with flash. However I believe I have found a solution to my problem, however I lack the AS know how to carry it through.I want to have one MC (which happens to be a camera function) to be on the same stage coords of another MC (which happens to be a moveable character). So effectively when I move my MC around with my keyboard the camera MC sticks on it were ever it goes.
View 4 Replies
Jul 5, 2010
I have a difficult question and I have searched all over but cant find a solution.I have 3 movieclips:a) circle, filled in blue, black outlineb) circle, half filled in blue, black outlinec) circle, no fill, black outlineI have one instance of a movieclip moving randomly about the stage and want it to fade between a) b) and c) (based on a user defined input array eg circleArray[a, b, b, a, c, b, a] - if that makes sense?)The only way I am thinking is to have a movieclip that contains each of the 3 movieclips and then fades each to alpha 0 with a black outline at the bottom layer. And then referencing each faded movieclip with a label?
View 2 Replies
Sep 2, 2011
I want to move my logo from bottom to top when the user click "Enter" button
in default state. I set my logo bottom="20" after the user click "enter" button. I want my logo move to top="20" But I found the logo didn't have move up transition. It just goto top instantly. I thought this is easy task. Would somebody tell me the trick?
[Code]....
View 1 Replies
Apr 23, 2010
I am trying to create a page transition that will play a movieCLip transition into a page. and then it stops then when another button is pressed, it will play that transition out while loading the appropriate one. In the attached FLA, if you click on the red button first, the blue transition plays,
--red button code--
mybutton1.onRelease=function(){
_root.transitionClip.play();
}
and then stops on the stage. When you click the green button second,
--green button code --
mybutton2.onRelease=function(){
_root.transitionClip.play("out");
_root.transitionClip2.play();
}
it works correctly/ Playing out of the blue Transition and into the Red transition. However if I click it again it does the opposite, and just keep alternating.
If I add the
_root.transitionClip2.play("out");
to the first button then, nothing works right. I will eventually have more buttons, and may need to use a variable to control which "out" transitions is played, but how do I get the buttons to do this?I just want it to exit the current movie clip and play the "in" section of the desired clip.
View 16 Replies
Jun 1, 2011
Its pretty simple what im trying to achieve.I have a MC on Stage, which im trying to tween to different X coordinates.I've set up four TweenLite.to sequences, however for some weird reason only one is being triggered - what am I doing wrong?
TweenLite.to(slider.mc_slider,1,{x:_returnXPos(95), ease:menuEasing});
TweenLite.to(slider.mc_slider,1,{delay: 1, x:_returnXPos(35), ease:menuEasing});
TweenLite.to(slider.mc_slider,1,{delay: 2, x:_returnXPos(50), ease:menuEasing});
[code].....
View 3 Replies
Jul 28, 2010
Ive been messing around with Tweenlite recently and love it. However there seems to be an issue how you can set which movieclip you are animating, for example to animate a movieclip from one position to another you would simply have: TweenLite.to(mc1, 1, {_x:220, _y:220}); However Im simply trying to replace the movieClip with a variable which changes like this: TweenLite.to("mc"+i, 1, {_x:220, _y:220}); Where 'i' is incrementing as normal. This in effect should produce mc1, mc2, mc3........and so on but it doesnt??? Anyone have anything they could share with me into why this wont work?
View 3 Replies
Aug 31, 2007
In Flash CS3/AS3, if I try to run a transition on a movie clip "PaneB" accompanied by a PaneB class definition, I get the following error:
ReferenceError: Error #1069: Property __transitionManager not found on Site.Page.PaneB and there is no default value.
However, if I don't associate a class with PaneB (leaving Flash to define a default one), I don't get the error. If I create a child clip (for PaneB) without a class attached, and then run transition on that child, things work OK. And, if I create a new movie clip at run time and add PaneB as its child and then run transiton on the parent, it also works fine. Meaning, there's something that the default class definition is doing that my class (that extends MovieClip) is not doing. Happens even if I don't define anything in the class!
View 4 Replies
Oct 10, 2011
i have a movieclip named bgMC that has 5 keyframes with a different image for every keyframes.i'd like to know if it is possible via actionscript, caurina or else to have a transition between keyframes like:
1) i use bg.gotoAndStop(1)
2) fade in the image i have in keyframe(2), if i use i use bg.gotoAndStop(2) the image is replaced istantly
View 3 Replies
Nov 16, 2009
How can I add a Squeeze transition effect between frames using the transition manager class on a simple slideshow using the goBack and goForward functions in ActionScript3? Below is the code I have so far:
stop();
function goBack(event:MouseEvent):void
{[code].....
View 0 Replies
Oct 21, 2004
What AS should I use to make an object wich is a movie clip appear into the stage?I have this action:
on(release){
something._x = -1000;
something._y = -1000;
}
But using it the object just appear, from nothing and I want it to appear from a initial position....
View 3 Replies
Oct 21, 2004
What AS should I use to make an object wich is a movie clip appear into the stage? I have this action:
on(release){
something._x = -1000;
something._y = -1000;
}
But using it the object just appear, from nothing and I want it to appear from a initial position....
View 3 Replies
May 18, 2010
i have a flex app that transitions between 2 states with the toggle of a button. my issue is that the effect of fading only seems to work on the 2nd transition and after. However, for my first transition... going from State1 to studyState... there is no fade effect whatsoever, in fact the components in state1 disappear completely (the footer fills the empty gap where the "body" use to be) and then the flex recreates the studyState (without any fade refilling the "body" with components only in studyState). After this first transition however, going between studyState and State1 working COMPLETELY fine.. why does this happen and how can i make it so that crossfade works STARTING FROM THE VERY FIRST TRANSITION?[code]
View 1 Replies
Oct 25, 2009
I have a presentation using the "presentation" template that comes with flash. I am trying to transition slides with the behavior slide transition options. but I've learned that it works find while going into a slide and doesn't go to the next slide when leaving.So basically I want it so that on right arrow first play out transition then go to next slide.
View 2 Replies
Feb 27, 2006
if you open up the TEST.swf you can see how I want my transition to look like.. everything works perfectly.. then if you open the Load.swf and click one of those red buttons.. it loads up the external swf.. but if you click another button it loads up the same external thing.the difference between Load.swf and TEST.swf is that in Load.swf is container in which the TEST.swf is loaded..
View 4 Replies
Sep 25, 2010
I am trying to get target movie clip's alpha value, which is animated.
When the alpha value is reached to certain value, I want to trigger certain event.
Is any way to get current frame's target alpha value by using set interval or event lister?
View 7 Replies
Mar 7, 2009
I have a main MovieClip in which I have several frame labels, each will eventually have different MovieClips associated with them. First time through I want to play an "intro" MovieClip, which I have placed on the stage at the begining of the main timeline, then at the end of the "intro" Clip, go to the first frame label and play that MovieClip.
The way I was going about it was placing this code in the last frame of the "intro" MovieClip:
Code:
MovieClip(parent).screen_mc.gotoAndPlay("home");
'screen_mc' is the instance name of the Main MovieClip.
[URL]
View 3 Replies
Jul 10, 2010
I am making a game in flash, that uses several resources to build different buildings, that help you to gain resources, etc. I'm trying to make it so that the more "_global.food" you have, the faster your resources will go up. I have it so that the variable "_global.woodBoostMeter" goes up as fast as "_global.woodBoostSpeed" and when it reaches 500, it gives you 1 wood. I want it so that "_global.woodBoostSpeed" is modified by "_global.food" divided by whatever 200 is. (So that you will get resources faster for the more food you have)
Here's the code I'm using:
Quote:
_global.woodBoostMeter =0
_global.woodBoostSpeed = _global.food / 200
_global.woodBoostObtainRate =1
[Code]....
I think the problem seems to be with the "_global.woodBoostSpeed = _global.food / 200". it doesnt go up slow like it should, since "_global.food" starts out at like 200.
View 3 Replies
Apr 9, 2010
I am making a splash screen for a program and I have a picture in my head of a spinning sphere with pictures on it.I've already made my sphere and mapped my design onto the sphere in illustrator, although it is not as clear as I wanted.How do i get the sphere into flash and animate it to spin continuously?
View 1 Replies
Nov 25, 2009
There's this flash web page Im developing. All movement is 90% written in code (as oppose to it being created via designer mode). And for some reason the frame rate of page in browser just keeps dropping. Can someone tell me what that reason could be?I am aware of the fact that framerate does change from time to time but I think that after a while it should climb back up. But in my case it just keeps dropping (by the 9000. frame its like 2 fps) and there isnt memory leak cos used memory amout by browser stays the same
View 1 Replies
Dec 24, 2009
I have a movie clip with motion in it. I'd like to duplicate this image, blur it, and mask it. I think I can do all of that, but I don't know how to update the blur so it will blur the moving elements in my movie clip.
how to constantly take a snapshot of a movieclip and blur it (while disposing of old snapshots)?
View 1 Replies
Dec 21, 2008
In the last 2 projects i've worked on, i've been using the blur filter to create certain effects.My problem is that whenever I test the movie in the Flash CS4 IDE, it crashes giving me the option to submit a crash report to Adobe before quitting.If I run the compiled SWFs outside of Flash, they perform much better and there is no crashing.
View 2 Replies
Jan 10, 2006
I have an array with let's say 10 items (keuzes_arr) in it and I want to put 'm on stage randomly, but every item can only be placed once. So I created a little loop, but for some reason the loop freezes constantly. This loop creates a random number, checks if it's already been used. And if not it use it to place the item on the stage.
[Code]...
View 3 Replies
