Is there a way to set up an unload FLV actionscript (AS3) on the click of a home button? So, when defining the functions of the home_btn, have it unload FLV (sound and video).
Or would it be better to put into the actionscript frame? So, when the home_btn brings the timeline to "home", the actions on that keyframe have an unload FLV.
I use this code on external swf's (launched from Home swf). Home swf is already playing in the background...so maybe I don't even need a "get URL", maybe I need to just bring to front (and play from certain frame)?
this code works to get Home swf but I think the child swf is still running in the background? How can I A:unload the swf this button is in when this button's clicked OR B: just unload this swf without reloading home swf.
[Code]...
I created a flash site and on the gallery page I load a gallery .swf and I want to be able to click on the "about" and "contact" buttons and have it go to there page and unload the gallery swf. This is the code I have on the gallery frame
import flash.net.URLRequest;
import flash.display.Loader;
import flash.events.Event;
import flash.events.ProgressEvent;
function startLoad(){
var mLoader:Loader = new Loader();
[Code] .....
I am having trouble with unload an loading movies. Basically I am loading a movie into a container, which works a charm:
[Code]....
I want to unload them both when a close button is pressed on the third loaded swf? Also, ideally I would like to add that second movie clip into a container, so I can position it correctly, but when I try copying the code I use on the first, it doesn't seem to work...is it to do with the "root" bit perhaps?
i need when you click a button it unloads all movieclips on a stage
View 5 RepliesI have a scene with buttons that call upon outside movies to be loaded. But when I click a button to go to a new frame, the outside movies on still being seen on top. Right now my button Action is:
on (release) {
gotoAndPlay(16);
}
What should it say to unload all movies then go the 16?
I have a scene with 9 buttons opening each a *.swf movie example: on Home I attach the action:
on (release) {
gotoAndStop (2);
}
// other buttons goto and stop frame 3,4,5,6...
on Frame 2 there is a blank keyframe with the action:
stop ();
loadMovieNum ("home.swf", 2);
unloadMovieNum (1);
unloadMovieNum (3);
unloadMovieNum (4);
[code]....
what about a *swf movie(1.3) loaded into a *swf movie(1.2) witch is loaded into a *swf movie(1.1)?can I unload movie 1.3 separately?
I'm building a site for my music and stupid as I am I tried to do so in flash.
well, most part works just fine
problem: i load an mp3 with
Code:
loadMovieNum("queen/player.swf", 2);
to use my homemade player-interface
what I need now is a way to unload these movies the moment someone leaves the frame. i tried to put an
Code:
unloadMovieNum("queen/player.swf");
on every menue item but that does not seem to work (by now you probably realised I'm no flash-guru)
The menu uses XML to load in the menu, so all the options are dynamical. If you click a button it loads a menu into the stage, but if i click an other it overlapse the old one... So i figured i need to unload all the other movies on the stage, how do I do this?
[Code]...
I am creating an interactive slideshow, like a PowerPoint effect, I have a main scene, 4 Buttons, a Home Button, Play Button, Forward Button & Back Button.
I want the Home Button to take me back to the start of the scene, Forward Button to Load a External swf slide and when the Forward Button is clicked again to Unload External swf and load in the next swf slide, I also want the Back Button to do a similar thing![code]...
Is there a way to automatically unload movies when a new movie is loaded? eg: 5 buttons, 5 bit of art. At the moment they overlap instead of unloading before the new one loads.
View 4 RepliesOn a particular frame I have the action
PHP Code:
loadMovie("swfs/home_text.swf", 1);
I want to add an action on a navigation button to unload that movie from main movie. I tried unloadMovie();, but no luck.
I've had to create the following code to get a series if loading movies to work properly. Each loaded movie is basically a series of automatically looping images controlled by external xml. I found that without adding the unload movie on each button action the first movie loaded kept playing over any subsequent movies loaded. However its rather long winded and if the amount of movies increase it really is going to be very large. How to create an efficient funtion that does the job in a more effective way:
intro_mc.onRelease = function() {
unloadMovie ("_root.container02");
unloadMovie ("_root.container03");
unloadMovie ("_root.container04");
createEmptyMovieClip("container01", 2);
loadMovie("deaf_intro.swf", "container01");
[Code] .....
URL...How and where and what do I add to make the movies unload before only the movie corresponding to the button clicked loads up and doesn't overlay?I'm having trouble with the level and all that URL...
View 4 RepliesI have a home.swf that is inside home.html.inside home.swf there is a btn with the following
cinema_btn.onRelease = function() {loadMovieNum("video_main.swf", 0);
inside video_main.swf is the following
loadMovieNum("video1/reels.swf",1);
the idea is to load reels.swf in level1 on top of video_main.swf in level 0 why reels.swf size looks much larger even though all swf's are 900 x 800?
[Code]...
I have drawn intersecting lines. The user can click on a region inside the angle formed by the two lines.When the user clicks inside the area, the small region formed by the arc between the two lines showing the angle should change. How can I do that.the region between the intersecting lines is sprite object to dispatch event listener, but the arc is shape object.
View 1 RepliesI want the current swf to unload and the new one to load only after a transition occurs. Is there a more efficient way to do this than if. switch()?
View 2 RepliesI am working on a school project that requires me to load external .swf or .jpg files. I currently have all of the buttons working and are loading an external .swf file on to the screen. The problem I am having is that when I go from one button to the next the loaded .swf stays on the screen and the next .swf gets loaded on top of it. I know that I need to unload the file but I am not sure where to put the code for the unload or what code exactly to use. I would like when the button is pressed to unload the previous loaded .swf and load the new .swf without having a separate button to unload.
[Code]...
I'm trying to unload an external SWF on _root to load a new one instead. I've tried (almost) everything but can't figure it out... I get this error : "Error #1010: A term is undefined and has no properties."
[Code]....
I have an intro.swf file that is basically a movie with sound that is exported for actionscript but not exported in the first frame. I just stuck it in a movie on my timeline and it works great and the preloader works because it doesn't load the sound before the preloader. I use :
musicSound = new Sound();
musicSound.attachSound("music");
musicSound.start();
to play the sound in intro.swf.
However, now this intro.swf gets loaded into an index.swf and everything works fine and the sound plays as long as I have the sound included in BOTH the intro.swf and the index.swf and the sound is exported on the first frame in the index.swf. I was hoping I could remove the sound entirely from my index.swf since it already loads into the intro but so far
I have been having trouble creating a movie clip with a reverse rollover effect within a movie which has a reverse rollover effect. that sounds confusing
In essence I wish to create a panel that rolls out on rollover and rolls back in reverse when the you rollout. I have done this using this script
[Code]...
However I wish to make movies within this movie that have the same effect on them. But when I create another movie or button within this movie it is not registering on rollover. I guess because the script on the main movie overrides it?
I am creating a calendar and only one part isnt work. That part is the movie (mc_nav). I have the mc_nav movie on each month's stage. The buttons are named correctly since I used normal modes reference thingy to double check the references. I am trying to have it move to the next frame in the movie, or back, or to the 3rd frame etc. The first section (NAVIGATION BUTTON LINKS) works fine. It is just when I try to navigate on the Scene 1 stage, from a movie within a movie, that the trouble arises. Each of the month movies (mc_sep, mc_oct, etc) have mc_nav placed on them. Then the month movies are placed in Scene 1 on each of their respective frames (mc_sep = 4, mc_oct = 5, etc). When testing the movie and I am sent to any month page, the navigation (mc_nav) wont work. The syntax according to the flash debugger is correct. The action script goes all the way through to the last frame (13) and the stop(); command is set to stop the movie at frame 3 (the splash page).
[Code]...
I have a small FLA file i created myself. its just a simple mp3 player, pause and stop and a volume slider, thats it.I want to import three instances of this into a bigger movie and have them all available to run at the same time.I need them to be all on the screen at one time (same frames) and I need them each to be able to play a different mp3 The user will not be able to decide which mp3, this is all 'hard coded' into the fla file.So how can I do this and get access to each individual movie's controls?
For example when I use the slider on the first player, I only want the volume to change on the first mp3.Would I even have to worry about this in the big file that has all three movies in it?I mean could I just code the volume slider to work right in the mp3 player file and then the bigger movie file will automatically know that when the volume slider is moved, only to affect the voume of the first mp3?if i do it that way, would I have to save out 3 different versions of the mp3 player file. one with '1.mp3', say, hard coded into it, another with '2.mp3' hard coded into it, etc?
I am trying to create a flash headline gallery animation for a web site and I am having a bit of trouble. I am trying to get something similar to what you see on many websites today. Example 49er website ( [URL].. Typically the animation starts with one headline for a story "Click here to learn more" . After 7 seconds or so it goes to the next.I want mine to utilize the horizontal sliding effect between stories. underneath the stories are several buttons for navigating to a specific headline.
Many example sites i've seen use javascript or something else, but i was attempting to use Flash. I borrowed some code from a tutorial and I have some of it done. I have the button nav working, and the headlines slide horizontally when clicked. What i can't seem to add to this is the auto-play, wait 7 seconds then go to the next.
What I want to do looks simple but I don't find the way to make it work.I put a scrollpane (named mainwindow) on the sceneand my code is:
import flash.events.Event;import flash.events.MouseEvent;
mainwindow.setStyle("borderStyle", "solid");[code]........
but I do not really know how to replace my home.swf with home2.swf
I've developed a small portfolio website, and have created a "home" button, but I can't get it to program correctly. I've tried using the Action Script to Go To and Stop at Frame feature, but it doesn't work. I need the "Home" button, whenever pressed to take the viewer BACK to frame 10.
View 3 RepliesThere is always really cool special fx on the kirupa home page banner. But I can never find out where I can find FLA's with them. Can someone give me a link to where I might be able to find them...If not. This would be a perfect place to put banner ef ex. So post them if you have them!
View 4 RepliesI am having trouble preloading my .swf files. Can anyone tell me how to create a "index" Page that says page loading while all of my .swf & .png files upload?
View 2 RepliesI have several swfs that now need to be brought together from one navigation menu/home screen that I need to create. This was easily done in as2 (replacing one swf with another when loading). Is this at all possible with as3? and if so what's the best approach?further info:the navigation screen will be an arial shot of a cartoon village, when you click on a house it should open up the swf activities than i've already created.
View 2 RepliesI'm trying to display a message on my web pages home page to notify all viewers on some info, I need it to open automatically when the page is accessed then disapper or fade automatically.I'm trying to avoid making this a pop up because most people deativate thier pop ups.
View 1 Replies