I created a flash site and on the gallery page I load a gallery .swf and I want to be able to click on the "about" and "contact" buttons and have it go to there page and unload the gallery swf. This is the code I have on the gallery frame
import flash.net.URLRequest;
import flash.display.Loader;
import flash.events.Event;
import flash.events.ProgressEvent;
function startLoad(){
var mLoader:Loader = new Loader();
[Code] .....
I have a photo gallery that runs in a container, which is added to the stage like so:
import com.xmlphotoalbum.*;
var gallery:XmlPhotoAlbum = new XmlPhotoAlbum();
gallery_container.addChild(gallery);
I want to have it set up so when you click on a "gallery" button, it reloads/refreshes the gallery to its initial state, because the "internal" navigation of the gallery isn't very intuitive...and so the only thing I can think of is essentially to remove the gallery and re-add it, whenever "gallery" button is clicked, which resets the gallery to its initial thumbnail view. I've tried fumbling around with removeChild, addChild, simple if statements, etc.
I am trying to create a button within "3D book", which upon clicking will open up a photo gallery. The code i am using was in the Instruction Manual for the book and is as follows:
[Code]....
Is there a way to set up an unload FLV actionscript (AS3) on the click of a home button? So, when defining the functions of the home_btn, have it unload FLV (sound and video).
Or would it be better to put into the actionscript frame? So, when the home_btn brings the timeline to "home", the actions on that keyframe have an unload FLV.
I am creating an interactive slideshow, like a PowerPoint effect, I have a main scene, 4 Buttons, a Home Button, Play Button, Forward Button & Back Button.
I want the Home Button to take me back to the start of the scene, Forward Button to Load a External swf slide and when the Forward Button is clicked again to Unload External swf and load in the next swf slide, I also want the Back Button to do a similar thing![code]...
I am working on a school project that requires me to load external .swf or .jpg files. I currently have all of the buttons working and are loading an external .swf file on to the screen. The problem I am having is that when I go from one button to the next the loaded .swf stays on the screen and the next .swf gets loaded on top of it. I know that I need to unload the file but I am not sure where to put the code for the unload or what code exactly to use. I would like when the button is pressed to unload the previous loaded .swf and load the new .swf without having a separate button to unload.
[Code]...
Please go to [URL] and click on the photo gallery link. Then click on any other link. The photo gallery stays on the page! how I can make it go away when clicking on other links? The actionscript for the photo album is on the last frame in the actions layer.
View 1 RepliesI need to go from one keyframe with a gallery, I need that gallery to unload and go to another keyframe called "contact" but when I do it always comes with
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at gallery_rabbit_picture_fla:MainTimeline/addImage/gallery_rabbit_pictu re_fla:comImage()[gallery_rabbit_picture_fla.MainTimeline::frame1:73]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at fl.containers::UILoader/passEvent()
at fl.containers::UILoader/handleComplete()
In the 1st. gallery keyframe I have the following it's the button called: contact03_btn that needs to execute the function (see highlight)
var galWid:uint=879.95;
var galHei:uint=300;
var galX:Number=10;
var galY:Number=175;
var scale:Number=1.7;
[Code] .....
ActionScript Code:
import flash.filters.GlowFilter;
import flash.filters.DropShadowFilter;
_global.gallerynum=1;
[code]....
There are 3 pics each in FASHION SPORTS and BEAUTY catergory and 10 and 5 in ENTERTAINMENT and COVERS respectively. All is ok but when i click on FASHION or other categories having less pics the pics from the earlier categories ( e.g. ENTERTAINMENT ) wont leave the stage. Also the unLoadGallery() function is giving an error message that ' This code is making flash to run slower. Would you like to stop this script?'.
I have a xml carousel gallery in AS2 that works great, except I want it to unload when I click a button that takes me to another frame or scene. Right now it just stays in the middle of the screen.
Here is my flash code for the gallery and a button for the frame (this code all works, I just want to unload the gallery when I click the button, go to a different frame, scene or whatever) [code]...
I have an XML gallery and I want in the next button function to "unload" all content and load new XML file.[code]...
View 1 RepliesI have parameterised movie clips on the stage. By clicking each one, a thumbnail gallery, that is loaded from an xml file should apear. The problem is that if an xml file has less photos than the previous, the new apear, but the old also maintain. So how can I reset/unload the previous gallery, before the new one apears? [code]...
View 0 RepliesI have begun to build a vertical gallery. I have it set up to follow an xml document and it loads rather quickly. While the loading works, the unloading is not so hot. I can't figure out how to unload the container_mc which contains all the thumbnails. I intend to develop this page in as3 primarily so that I can adopt it to other projects. The arrangement is two vertical boxes on the right and left, a text box at the bottom in between the two vert boxes, and a fullscreen box in the center. The drawn squares are only being used as placeholders for real art right now.
As it stands, I can use either button to load the gallery, but when I click the next gallery it unloads everything, but it does not reload the next gallery. I want the buttons to load their respective galleries. I figure once I set up the structure for 2 galleries, I can make more.
var Gal_Array1:Array = new Array();
Was my attempt at loading the thumbs into an array, and later clearing it but I don't think it works (I think it would only double the amount of thumbs?). How to properly load and unload the container_mc?
Code:
import flash.net.URLLoader;
import flash.net.URLRequest;
import flash.events.Event;
import flash.display.MovieClip;
import flash.display.Loader;
import flash.events.MouseEvent;
import fl.controls.ProgressBar;
[Code] .....
i have to generate a button dynamically... and have to keep a click handler for the same how to write script for clicking buttonim using following code for creating button dynamically
var btn:Button = new Button;
btn.label = "Print";
I have many buttons (symbols). This is what I want it to do: -Select a button on the screen, and then a movieclip plays. - If the user selects any OTHER button on screen, a message box displays a message.
View 2 RepliesI want to stop the sound loop from one button by clicking new button. Does anyone know the code that would stop one button's sound from looping by just clicking another button (for another sound)?So you have these buttons:button 1 button 2 button 3 button 4and after clicking "button 1" a sound loops. when i click "button 2" i want the sound from "button 1' to stop.
View 2 Replieshow to do so by clicking on the button movieclip moved to x = 100; and when pressed repeatedly to x =- 150 event onRelease - not work:
[Code]...
I am using actionscript 3 to make a point and click game. On frame 1 there are two buttons, button 1 and 2. On frame 3 there are two buttons, button A and B. I want it so that after I click button 1 on frame 1, button A on frame 3 will be hidden or when I click button 2 on frame 1, button B on frame 3 will be hidden. The buttons that are hidden do not do anything when you click them.
View 2 Repliesive made a button and ive got it to randomly move to a different position on the screen.the probelm is when i click, everything else on the stage moves. They are all on different layers.How do i get different buttons to only move when i click on them, otherwise they stay where they are
View 1 RepliesHi! I just figured out how to animate a button on mouse over. My question now is, how could I make a button animate after clicking it and before it goes to the link?
View 5 RepliesI am autoplaying a FLV in a SWF in scene 1. I have created buttons on this same scene that will do different things, and present different information. I really want that button to pause that autoplaying video when it starts those actions. How can I accomplish this?
View 6 RepliesIm creating an xml based mp3 player in AS3. I have everthing working except the repeat song part. I need a code to loop the song endlessly on the click of a button, while the song is playing. Say the user is listening to a song and wants to hear it again. They can click on the loop button and replay the song until they click on the loop button again, to take the loop off. Once the loop button is clicked again, the current song ends and plays the next song in the playlist. As the playlist continues to play, I hear another song that I want to replay, so I click on the loop button. Also I need to be able to pause the song and then play it, while the loop is in affect.
View 1 RepliesI'm using Adobe Flash CS4 and ActionScript 2, And I need to go to the next scene buy clicking on a button. Instead it stays in the same scene. And this is the code I use:
on(release) {
gotoAndPlay("Scene 2",1)
}
I'm making a website with mc used as button for the menu. I want that when I click on
a button it remain on "over" state, then when I click another button it come back to "up" state and the new one to "over", I can do this, but then I can't assign single action to every button (like onRollOver, gotoAndPlay ecc..).
Here is my code:
The button instance is pbtn0, pbtn1 and so on to 4.
fncBtnBuild = function () {
For each of 5...
for (var icrBtn = 0; icrBtn<5; icrBtn++) {
Create a reference to a movieclip-button's instance name (pbtn0 through pbtn4).
var rfcClip = this["pbtn"+icrBtn];
[Code] .....
I would like to to have 2 vidoes next to each other on a webpage which start simultaneously so that the viewer can compare the two.
what HTML code to use in order to achieve this.
if i click the button continuously, there will be also continuous trace of "click" base on how many times i clicked the button..now the question is, how could i make it only one trace of "click" event if i clicked the button many times?
Code:
button.addEventListener(MouseEvent.CLICK, onClick)
function onClick(e:MouseEvent):void
[code].....
i have a few scenes that run all together by clicking on a button to get to the next scenes. instead of the next scenes coming and going super fast, i want to have some neat type of animation that string them all together when you want to get to the next scene.
View 6 RepliesI have drawn intersecting lines. The user can click on a region inside the angle formed by the two lines.When the user clicks inside the area, the small region formed by the arc between the two lines showing the angle should change. How can I do that.the region between the intersecting lines is sprite object to dispatch event listener, but the arc is shape object.
View 1 RepliesI'm new to wonderful world of flash and I'm having a little trouble with a button I've created. Basically, I have a button which covers an image. I'd like to make it so that after the button is clicked, it disappears - thus exposing the image behind it.
View 8 RepliesI created a button.....it will be clicked 2 times. When clicking on button 1st time, the ball 01 will appear. When clicking on button 2nd time, the ball 02 will appear.
Code:
var i:Number = 2;
_root.next.onPress = function()
{
[Code].....