ActionScript 3.0 :: Using Timer To Add Multiple Children
Aug 26, 2009
I did this once in AS2, but as I'm trying now to code in AS3, everything has to be re-learned. I have a very simple game where the user has to navigate through an intersection without getting hit by oncoming traffic. The traffic is a single movie clip that I want to use over and over. Using an interval, I can add the movie clip as a child of a container, but once it plays it's done. Previously, I used the variable "i" and added it to the end of the instance name. Something like this did work:
[Code]...
View 8 Replies
Similar Posts:
Mar 24, 2009
In this game attached I need the old Children (rats) to hurt the character when he walks into them, however only the most recently added Child is active in that way... also the rats seem to appear above the character instead of below, is there any way to resolve these issues??
View 4 Replies
Jan 2, 2010
i want to do is to remove all the children (ninge) added with Timer when the user rolls out the mouse. The ideea is when the user moves his mouse over the movieclip it begins to snow and when it moves away i want all the snow to disappear.
ActionScript Code:
rama2_mc.addEventListener(MouseEvent.MOUSE_OVER, rama2);
function rama2(event:MouseEvent):void
{
[Code]....
View 3 Replies
Aug 24, 2011
I am creating a game and want to reward the player at the end of a level by playing an animation. I have created a timer to add the animation to the stage but cannot figure out how to remove the animation once the timer has completed counting. I am sure you wise scripters out there know the secrete to this mystery.
[Code]....
View 2 Replies
Aug 24, 2011
I am working on a game and want to reward the player with an animation at the end of a level. I have created a time and added the animation to the stage but I cannot figure out how to remove the animation once the timer has completed.
Code: Select all/* Simple Timer
Displays a countdown timer in the Output panel until 30 seconds elapse. This code is a good place to start for creating timers for your own purposes.
Instructions:
1. To change the number of seconds in the timer, change the value 30 in the first line below to the number of seconds you want.
var celebration:Celebration;
var fl_TimerInstance:Timer = new Timer(1000,30);
fl_TimerInstance.addEventListener(TimerEvent.TIMER, fl_TimerHandler);
fl_TimerInstance.removeEventListener(TimerEvent.TIMER, removeTimer);
fl_TimerInstance.start();
[Code] .....
View 1 Replies
Nov 18, 2009
I'm making a OSX-finder-type file browser in CS4.The Structure for the folder and files is being generated by a PHP in a XML, heres an example:(sorry the xml is not sorted, but the command i'm using in php doesn't sort it)
Code:
<root>
<dir name="images">
[code]....
View 2 Replies
Oct 5, 2009
I am having trouble determining where to add my removeChild() statement to clear multiple movieClips from a container mc. I know I need to determine if the container movieclip contains anything. I don't know how or what I should put and where to put it. If I can determine if my container mc has movies in it, I am assuming I can just declare it again (i.e
PHP Code:
panel= new MovieClip();
)to clear it. Am I correct?
[code].....
View 6 Replies
Jul 17, 2009
Suppose I have a Movieclip and in that Movieclip I have several MovieClips I'm using as buttons.I want all the buttons to do the same thing when I MouseOver. Is there a way I can reference all children of a display container so that I can have a statement like MouseChildren.addEventListener(MouseEvent.RollOver, rollOverHandler) ?
View 3 Replies
Nov 15, 2011
So I'm working on a Flash version of the old "Robots!" game. In case you're not familiar: the game lays out a number of robots on a grid (number varies by level), and drops the player in the middle. As the player moves around the grid, the robots all move towards the player one grid space per player move. The object is to destroy all the robots by making them run into each other (or the rubble left from previous collisions) without letting a robot run into you.
Anyway, my robot hordes are being created on the stage through a "for" loop, and each icon is a child of variable "evilBot" which references a library item with the class name "enemy."
ActionScript Code:
function placeBots():void{
for (var c = 0; c < numBots; c++){
evilBot = new enemy;
[Code]....
I've run a trace on "evilBot.name" and verified that the children are being given instance names of "evilBot0, evilBot1 ..." and so on. But no matter what I try, I can't issue instructions (regarding movement, orientation, etc) to individual children.
Using a for loop and "this["evilBot" + x]" returns a "term is undefined" error.
If I store the instance names in an array (named "botName") and use "evilBot.name[botName[x]]", I get the error "Property evilBot0 not found on String and there is no default value."
View 9 Replies
Jun 3, 2009
I have a circle_mc on the stage. Then I create randomly placed 20 squares (square_mc) on the stage. I can move my circle on that stage, and all I want is to check hitTestObject(or any *yet unknow for me* method that gives a result) if circle touches any of squares. Then I need to remove that touched movieClip (square) from the stage. hitTestObject checks if 2 specific objects are touched. My question is how to know which square is which, and then if it touches with circle_mc to remove it from the stage.
Code:
Select allif (circle_mc.hitTestObject( ?whatHere? ) ) {
?whatHere?.removeChild( ?whatHere? );
}
View 2 Replies
Nov 5, 2011
I'm using for loop to display 3lifes on stage using:
[Code]...
and I have already create a hitTestObject on the character, once the character comes in contact with a movieclip, removeChild(Life); is triggered. The first child removed successfully but when it comes to the second one, an error appear:
[Code]...
What should I do to solve this? and how do I trigger an event after no more life is left?
View 9 Replies
Jun 18, 2009
give unique instance names to multiple children of the same object?
I have a sprite that I would like to use action script to create 3 instances of on stage and then control each separately.
View 6 Replies
Mar 8, 2010
I am attempting to use multiple AS3 timers to run a short animation in flash but I'm having a problem with some of the instances running slowly or not being removed when they are supposed to. I found a way to make things work the way I want but in being new to AS3 I believe my runtime issues are due to jumbled code.
import fl.transitions.Tween;
import fl.transitions.easing.*;
var playerFadeTween:Tween=new Tween(thewebs, "alpha", Strong.easeOut, 0, 1, 2, true);
var playerXTween:Tween=new Tween(thewebs, "x", Strong.easeOut, 292, 10, 2, true);
[Code].....
View 1 Replies
Feb 26, 2009
I really need a Timer that shoots multiple functions. The Timer Class just handles one function and therefore is not good enough for my project. The Timer should work something like this:
After 1 seconds fire functionOne
After 4 seconds fire functionTwo
...and so on...
Time is really crucial in my project (down to milliseconds) so I really can't use the Timer Class and fire "new" Timers all the time because Flash needs some milliseconds to process all the code and in the end it sums up to kind of a lot of time.
View 7 Replies
Jul 13, 2011
i have a shooting game that works with some sort of rounds, for instance, this round is gonna show 4 enemies on the screen that the user has to shoot. I show the 4 enemies at a half seconds interval of each one so it doesnt all appear on the same time. Using something like:
enemiesShowTimer = new Timer(0.5 * 1000, 1);
enemiesShowTimer.addEventListener(TimerEvent.TIMER, showEnemyAtTime);
enemiesShowTimer.start();
The player has 2 seconds to kill each enemy after they appear, so i also use this:
enemiesCleanTimer = new Timer(roundConfig.getSecondsPerEnemy() * 1000, 1);
enemiesCleanTimer.addEventListener(TimerEvent.TIMER, cleanEnemies);
enemiesCleanTimer.start();
The problem is, after the player dies i change scene and if i still have like 3 alive, enemies, the threads will try to run the methods and it will crash. I'm using always the same variable to the start the timer whenever i need it. How can i solve this? Will i have to store each "thread" (timer) on a list and then stop each one separately? Because the way it is, the other threads are in some sort of "limbo" and i cant stop then, just the last one.
View 2 Replies
Jan 12, 2011
I have a Sprite called pageContent. Inside pageContent are 12 more Sprites with unique names, a couple of Buttons, and some TextFields. Inside each of the 12 Sprites I have either one or two TextFields and one TextInput. My question is, since they are children inside a child of pageContent, how can I access them? Here is how I am trying to do it:
[Code]...
In my mind, this should totally work. But surprise, surprise, it doesn't. I have debugged it and it works fine for the first two lines, but when it tries to get numChildren of a Child of pageContent (line 3), I get this error: PHP Code: 1119: Access of possibly undefined property numChildren through a reference with static type flash.display:DisplayObject.
View 4 Replies
Jan 11, 2010
I want to have a rollover effect of a movieclip (mo1) inside a movieclip (mo) of another movieclip (popup1).Is it possible to do that? I try calling it using this code in the frame 1 of my flash, am i doing wrongly?
Code:
popup1.mo.mo1.onRollOver = function() {
popup1.mo.mo1.gotoAndStop(2);
[code]......
View 9 Replies
Sep 23, 2006
Newbie to XML here and I have what I *hope* is an easy problem, but I just don't know the answer. And as I have to try and show this by Monday, I'm sort of stuck. I am trying to pull in information about houses via an xml file. Each house has 1 address, 1 owner, 1 description, and about 6 photos. I have no problem accessing the address, owner, etc, and I can always access the first photo, but whenever I cycle through the photos, I seem to cycle through the first photo for every house, not every photo for each house.
Basically, I need the children <images> to go up by one, without the the parent going up by 1. I am hoping I am describing this well. My code looks like this:
[Code]...
View 4 Replies
Mar 10, 2010
I have a Canvas which has many components inside it and those again, have many components inside them.
getChildren() returns only the top level children. What is the best way to retrieve all the children (children of children of children and so on).
Well, I sorta know how to do this by iterating through the children, but the code is really messy. I'd prefer to use a nice recursive function. Has anyone written this before? Or is there a Util class to do this?
View 3 Replies
Jul 24, 2010
I am trying to pull in information about houses via an xmlfile. Each house has 1 address, 1 owner, 1 description, and about 6photos. I have no problem accessing the address, owner, etc, and Ican always access the first photo, but whenever I cycle through thephotos, I seem to cycle through the first photo for every house,not every photo for each house.Basically, I need the children <images> to go up byone, without the the parent going up by 1. I am hoping I amdescribing this well.My code looks like this:
total = xmlNode.childNodes.length;
totalb =
xmlNode.childNodes[0].childNodes[5].childNodes.length;
[code].....
View 1 Replies
Oct 28, 2011
I have an ArrayCollection that is read to generate containers in an accordion programmatically:
<s:ArrayCollection id="_ac_ps">
<fx:Object label="Block and lot" data="_blocklot" searchType="districtblocklot"
info="" />
[code].......
View 1 Replies
Feb 16, 2012
I am working on a very simple game in Flash. I want to make all the animations framerate agnostic, so that I can change the framerate without affecting the flow and speed of the game.I read somewhere that if you want to do that, you simply create a Timer object and attach an event listener to this timer.
What if I have many objects that have to listen to the same timer? See the code to understand what I am trying to do. At this stage nothing breaks, but the event does not fire.Here is the Main class, the one that runs on swf execution:
public class Main extends MovieClip {
private static var _stage:Stage;
private static var _timer:Timer;
[code]....
View 1 Replies
Jan 11, 2011
for some reason STORAGE[0].getChildAt(0) works whereas liner.getChildAt(0).getChildAt(0) does not. STORAGE is a movieclip and a child of liner. the error is something about not being able to use getChildAt on a display object. what's wrong? is there any other approach i could use? PS: liner.getChildAt(0) works and does indeed seem to refer to STORAGE[0]
View 2 Replies
Aug 27, 2008
What is the difference between Timer.stop() and Timer.reset() functions because it seems that the 2 functions do the same thing? I image Timer.stop() to stop the timer and when Timer.start() is called the timer starts from where it stopped. For example, if I have a 3 sec. timer (3000 ms). If I stop the timer after 2.5 sec. and start the timer again, I would expect the timer to expire/trip within .5 sec.
View 1 Replies
Nov 29, 2011
I have a ActionScript 3.0 project and I have a timer that is running on 1000 millisecond intervals. I would like to delay this timer for 1500 milliseconds perform an action and start the timer again after the delay. I thought I could do this easily, but I'm having trouble, would it be better to stop the timer and perform the action and then listen for the action to be completed to start the timer again?
View 1 Replies
Mar 6, 2012
In my case, the timer I make doesn't reduce its time whenever a function is called. What code will I change or add in order to reduce the time in my timer? [code]At this point the timer.start(); is placed on a frame so that the timer starts as it enters the frame.
View 1 Replies
Mar 26, 2011
The document doesn't mention anything about this:[URL]..
View 1 Replies
Jan 27, 2009
Well I have something like this:
<tests>
<test>1</test>
</tests>
[Code]....
Is there a way to make it add the child properly instead of botching the entry up like that?
Code:
var test:XML = new XML("<tests><test>1</test></tests>");
test.appendChild(new XML("<test>2</test>"));
trace(test);
View 1 Replies
Mar 18, 2010
I am creating a breakout game and below is a part of my code:
function updateGame(e:Event) {
if (ball_mc.hitTestObject(brickone_mc)) {
beepSound.play();
yVel*=-1;
removeChild(brickone_mc);
[Code]...
I have got it removing the bricks as each brick has an instance name, I am now wanting to go to an end screen once all the bricks have been removed, is there a way to count the children and then put a gotoAndStop() in?
View 1 Replies
Nov 10, 2009
ok, my Digital arts class is making a flash project, and im like the only one actually making a game, so im pretty much alone. i got a lot of help from the people on the AS3 forum, but im pretty sure that my question is too easy to put there. so, i have an array, and it basicly puts a spike on the screen at a random Y, and moves it across the screen, but, when i hit a spike, and ti goes to the you lose screen, the loop keeps adding children, and putting them on the screen, is it possible to just say stop adding children, and go to the next frame? i have a break, but when i stop colliding with the spike in the next frame, the spikes start coming again. also, can i totally reset the movie? cause when i just go to frame 1, the array plays itself ontop of itself and it gets twice as hard
View 2 Replies
