I have some AS3 code that reads multiple xml files.On a Mac it runs fine.On a PC it runs in firefox and chrome, but not in IE9.It loads and hangs. The code is rather complex, so I'd rather avoid posting it.I'm just wondering if people have had this happen to them, and what the issue was so I can get some ideas of where to start looking?
View 2 RepliesI have a movie clip (with instance name rectangle_mc) on the stage. Within this movie clip there are two separation animations on the timeline. The ROLL_OVER animation starts on frame "over" and the MOUSE_OUT animation starts on frame "off." If I roll over the movie clip, the initial animation plays, and when I mouse out the other animation plays to restore it to it's initial state. However, once the rollover animation has played once, it will not play again when I roll over it again, but for some reason the MOUSE_OUT plays every time.
[Code]...
The problem is that the buttons only work once, after that the event listener isn'ttriggered (I think) I have no removeEventListener in my code for those events so I'm totally lost as to why is this happening.
stop();var correr:Boolean = true;Globals.vars.videoP = CM_player;SnowManInst.addEventListener(MouseEvent.MOUSE_DOWN, mudarVideo_SM);bananaKingInst.addEventListener(MouseEvent.MOUSE_DOWN,
[code].....
I've been working on a flash animation with some actionscript 3, which basically is the main.swf that calls upon 5 other swf and txt files that I am embedding into a web template. It all works fine on my mac but when I test on a pc I am able to call upon the other swfs and it pops up but the close button does not work. I assume that it has something to do with my actionscript with the children swf. But just in case I will show both.[code]
View 2 RepliesThis should work! I cant figure out why it doesn't. Fortunatley I discovered that it worked perfectly in Flash Player 9. But I guess it must run on FP 10, snice I was thinking to implement this in an AIR for Android application. On the stage I got a button with the instance name of: submit. In the library I have a MovieClip with the linkage of: radioButton. This MovieClip is just to frames with different grafics. It is supposed to work like a checkbox or a radiobutton.
[Code]...
I finished my website and uploaded to internet. And when I showed friends that use IE7, Chrome or any other browser besides Firefox it failed to work. The SWF gets stuck at the preloader at a certain percentage but the animation of the preloader still runs. Here is the link (try to watch from different browsers): [URL]
View 2 RepliesI made a scrolling text box that I feed xml into. The only thing is when I scroll down or up I can only get it to work once.
[Code]...
I want it so that every time I that I press the button that I scrolls down.
I have created a program that pulls large amounts of data from an XML file. The program works absolutely perfect if I test it in Flash or open it in IE. The problem I have run into is that when I put the program into a webpage using the following code (neither one works), it no longer connects to the XML file. Am I missing something in the code?
PHP Code:
<object width="880" height="800">
<param name="complete_bikes" value="flash/complete_bikes.swf" />
<embed src="flash/complete_bikes.swf" width="880" height="800">
</embed>
[Code]....
I have a simple event listener which calls a functions which first uses a switch case statement to determine what evt.target was pressed by name so I can assign info there--presently I just have trace statements--the problem is that it only works once and then I just get instance29 and the switch case evaluates to the default.
Code:
lifering1.addEventListener(MouseEvent.MOUSE_OVER, playSplash,false,0,true);
function playSplash(evt:MouseEvent):void
{
[Code].....
I can only run a timer.start(); command once, the second time it will only run once instead of the value of 10 repeat.
Code:
var addTenPointsTimer:Timer=new Timer(500, 10);
var currentScore = 0;
score.text = "0";
[code]........
I want to be able to have the score add the ten points one at a time rather than all at once. It works fine the first time ten points are added, but the second, third, fourth, etc time it only adds one point then stops. How can I get the timer to work more than once?
In The Flash Application, my gallery is working as it is meant to. Yet, when I upload the swf to the live site, the first image, text and movie of my gallery works but it refuses to scroll to the next item in my XML.
I have given it an absolute path to that server which works in Flash but not when it is online.
OKay, I have a drop down menu. Around the menu I have a button surrounding the outside, so when I roll away from the drop down menu and roll over the outline button, it is coded with action script to make the drop down menu fade away.
View 6 RepliesI downloaded a 60 day trial of Flash Pro. I ran it once and it said that it was the last time I would be able to use it.
When I run it now I get a serial-number screen.
I have two questions about how the XML class in AS3 works.First, does the XML class care about the initial processing instruction when created from a string like this?:[code]Second, how can I add that procession instruction to an XML object that I am working with so that toXMLString() returns a string that looks like the above XML? (So that it includes the processing instruction.)
View 2 RepliesTrying to recode map program to utilise modest map rather than original hand made map routines. Finished up yesterday and had squashed bugs pretty much(annoying flicker issue but that didn't appear on another web browser I figure it's flash/browser related issue). Then I realised I need to try this in IE as well. And it doesn't work. Map loads up so modest map code is working. What is NOT working is everything else. It's supposed to track locations and draw arrows to their positions.
It doesn't go to where it's supposed to initially. No arrows are drawn. No control buttons from HTML side work. Nothing. Zip. I have suspicion it could be the ExternalInterface which works differently on firefox and IE. Could that be reason? If so how does one go detecting what browser I am using and how does one need to take that into account? Or is there something else that's different between IE and firefox I need to take into account?
IE itself only gives rather mystified error message.
Message: Unspecified error(my translation since original is in Finnish)
Line: 49
Column: 5
Code 0:
[URL]
Funny thing is both php file and output html file is 37 lines long...
I would like to build an Android application with my game coded in ActionScript 2.0.The AS2 game is loaded by an AS3 loader and I build an APK with Flash CS5.The loader is displayed correctly but the AS2 doesn't work.
View 1 RepliesPlay animation and after clicking the button once it no longer works. The button takes you to the frame labeled "shake". I want it to continue to take you to "shake" each time it is pressed but its not.I've got a button inside of a movie clip - actually its inside of 2. The first MC runs through and stops on the stop(); frame and than you click the button that sends the play head to the frame labeled "shake" which plays the next MC with the same button inside of it. I have put the button's action on its own layer on the first frame. The length of that buttons timeline starting from the first action keyframe is the length of the time of the other 2 MC's.
The Code
mcButton.shakeButton.addEventListener(MouseEvent.CLICK, onClick);
function onClick(event:MouseEvent):void{
[code]....
If you go here and click on the animation link the skin at the bottom of the video is visible then fades away. If you navigate away from animation then come back the skin isn't there. I don't know why. Here's the code for the animation swf with the parts I think are relivern in bold:
[Code]...
I try to figure out how does focus mechanism work in Flex. Here comes the example of what I mean:Let's assume that we have a simple web application, which contains custom component that extends Canvas and implements mx.managers.IFocusManagerComponent. This component overrides focusInHandler and focusOutHandler methods and shows some feedback on how they are called (thinner or thicker border). This custom component also contains some Text.[code]
If you click once on a violet canvas it receives focus (focusInHandler is called), then if you click again the focus is lost (focusOutHandler called) - why?Of you click on a Text the Canvas receives focus (focusInHandler called) and keeps it when being clicked wherever on the area (focusOutHandler nevet called) - why?
how the line of sight works in 2d? Which will be really help full for my 2d experiments. The experiment am working is a simple 2d simulation. Player move in the world from one place to other , my world exactly looks like this. I did the character movement successfully from one way point to other (A to G) , my goal is - when the character passes each point it has to perform some search in that area before it leaves to next point. To achieve I felt way point is better solution , can anyone help me on this.
Edit :
As soon as the player enters a room/checkpoint I will take user to next scene like this where the pickups are place some where on the canvas and my player have to collect them all and leave the area - Back to Map scene.
I'm trying to make a socket client in FlashAS3 for my socket server written in nodejs. I also have a mobile app client that communicates with it.
In AS3 I wrote some test code that works perfectly when I publish and run Windows EXE file but when publishing to SWF and opening in browsers it does not connect to server. Even all that "imports" do not help. The Code:
[Code]...
I have a xml structure like this:
<root>
<acteCourantPHP>
<acCLibel>Soins Semestre 6</acCLibel>
[Code]....
And I'd like to access to specific value, for exemple I like to access to root.LastRgtPHP.montantLastRgt but I don't know how to do that.
[URL]..This movie seems to run fine on OSX in Firefox and Safari, but just hangs on my friend's Windows machine. I've only been able to test on his machine, but I'm pretty sure it seems to be a windows problem,and not just his machine. Not much going on as far as code. I'm just stopping, waiting until bytesLoaded equals bytesTotal, and then playing.
View 3 RepliesIn The Flash Application, my gallery is working as it is meant to. Yet, when I upload the swf to the live site, the first image, text and movie of my gallery works but it refuses to scroll to the next item in my XML.I have given it an absolute path to that server which works in Flash but not when it is online.
View 1 RepliesI have a listener and a function for it on the main timeline, listening for TextEvents from links in a dynamic textbox nested somewhere in the movie. The problem is that everything works only once. I click on a link, it works, click again and it does nothing. I have to reload the objects for it to work again. What am I doing wrong? Do functions work only once when the main timeline is stopped?
View 1 RepliesI got a big problem. I want to load data from an asp file, but i can't get it work. It says 'undefined when i trace' Only extern text is working.
[Code]...
URL...When I test the swf file locally, or even on google chrome for some reason, it works fine. But for some reason on IE the ball just bounces back and forth and doesn't follow the code at all.
View 2 Replieswhen i make this script:
onEnterFrame = function(){
if(ss.hitTest(_root.c2)){
_root.ss._x = -49.4;
}
}
it only does go to cords -49.4 once, after ss have hit c2 once it doesn't react when it hits c2 again!
I'm working on a "floating" flash animation that's scheduled via a CMS it works perfectly in FF and doesn't show up at all in IE.Before I start tearing into CMS issues, I want to make sure there's not an obvious reason for this problem.It's a purely "code" animation.There's nothing on the stage at all. AS3 document class adds a couple of move clips from library, then programatically creates flames around them with Perlin noise and displacement map filters.
View 5 RepliesI inherited a site that was created in CS3, using ActionScript 2.0 and I have CS5. The main file is titled flashindex.swf. On load, it loads home.swf. home.swf contains an image that slides out and a video player that fades up. It works fine on the current live site - [URL] (not enough posts to post links) But when I re-publish in CS5, no image slides out [URL]
A helpful forum member with CS3 tested it for me, and it works when it's published in CS3. I need to figure out how to make this work in CS5. Not sure if it has anything to do with AC_RunActiveContent.js, but that file is not referenced in the code of the original.
[Code]...