ActionScript 3.0 :: AddChild Adding Too Many Children
Jan 8, 2010
I am trying to make a function where if you click on one button, a new movieclip is added to the stage. When you click on that movieclip, it should play the closing and remove itself from the stage (removeChild).The problems I am running into are that when you click the button, it will add a new movieclip child for every click. I want it to only add one and any successive clicks would close it.Also I was successful in making the new movie clip play the closing but I cant figure out how to remove it from the stage. Its alpha fades to 0 as the closing, but its still there and just invisible.[code]
I used to have the checkbox MovieClips in the menuListingClass, but I instead wanted to add them using something like addChild(). However when I try to reference the checkboxs later in the same way as I did before, I get an Error #1010: A term is undefined and has no properties. What do I need to add to reference the checkboxes like I did before?
I would like to add the same object to two different movie clips but flash wont.I have movieclip1 and movieclip2, now I want to load an external picture and add it to both movieclips. Then the following code does not work.[code]My question is: how I can add the ImageContainer to both movieclips and manipulate them separately ?
i have a problem about adding child. i have a video that loops and i want to addChild at root of movieclip.anyway, i can add my child but when timeline loops, its adding over and over again. i dont think need to add my code here cuz no error message or something.
I'm working on a project where I keep adding children to a MC already on the screen. There are two types of these children: Sprites that I use to draw lines using moveTo, lineTo, ect. Then there's sprites that have children inside of THEM that are bitmaps.
For some strange reason, the Sprites with the bitmaps on them always have a higher depth/index (AS3 terminology is still weird for me) than the normal Sprites.
Here's a diagram of my MC/children/children layers:
---------------=> (Sprites that draw lines) (MC on Stage) => ---------------=> (Sprites that hold bitmaps) => (Bitmap)
I'm adding various movieclips to the stage with the following code:var invis_obj = new invisible_li_mc();addChild(invis_obj);However, when I try to access the movieclip such asinvis_obj.buttonMode = true;I get nothing however, something like invis_obj.alpha=0; works fine..
I want to add children from the library that are named something like b1, b2, b3 etc. I'd like to add a numeric var to the name so that I can randomly or incrementally reference them. I can't seem to get the syntax/implementation right.
I've attached the FLA.I'm trying to make a game where the guy kills rats that appear randomly as the scenery moves down, however every time I shoot the rat and remove the rat child, it throws an error that my actionscript is pointing to an inexistent rat. Hence my problem... is there a way to add many instances of the same class with AS3 at random intervals and remove them when it's shot with the bullet???
I am working on an application that has buttons (movieClips) to set the color of user input (graphics, type, etc...). When clicked, the selected button displays a movie clip of a palette of 35 colors.I open the palette with the following function (is that the same as a method?):function openPalette(event:MouseEvent):void event.target.addChild(colorPalette);}I can then click on the colors in the palette to select the color I want.However, since the palette is a child of the button, clicking on a color within the palette triggers the same function as clicking on the parent button again. I get the following error:ArgumentError: Error #2150: An object cannot be added as a child to one of it's children (or children's children, etc.). at flash.display::DisplayObjectContainer/addChild() at design_AS3_ii_fla::MainTimeline/openPalette()
So basically I've got a MovieClip called Jug and when the egg is clicked and dragged to the Jug I want it to disappear and then re-add itself in the place it first started. Aswell as this I want a variable to be added by 1 in value. I have tried fiddling around with this for a while now and I can't figure it out since when I remove child it gets errors. Here's the code:
I am creating a game and want to reward the player at the end of a level by playing an animation. I have created a timer to add the animation to the stage but cannot figure out how to remove the animation once the timer has completed counting. I am sure you wise scripters out there know the secrete to this mystery.
I've spent hours, and for all my self taught newbie-ness, I can't crack this: I have a navigation panel with several buttons. Lets call it mainNav. The mainNav buttons each add to the stage their corresponding MCs. They also remove any MCs from previous buttons currently on the stage. This is done by creating the MCs as variables, pushing those variables into an Array, and, when the mainNav button is pressed, calling the following function to remove the old (provided with assistance of the nice folks here), and then addChild(correspondingChild)
I'm trying to make a game where the guy kills rats that appear randomly as the scenery moves down, however every time I shoot the rat and remove the rat child, it throws an error that my actionscript is pointing to an inexistent rat. Hence my problem... is there a way to add many instances of the same class with AS3 at random intervals and remove them when it's shot with the bullet?
I am trying to add children to a dynamically added swf file, using AS3, before I add it to stage
Here is the code I have thus far,
AS3:
var mLoader:Loader = new Loader(); var mRequest:URLRequest = new URLRequest(glo.bal.base_url+"videos/vid_1.swf"); mLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, onCompleteHandler_one); mLoader.load(mRequest);
[Code].....
Inside the vid_1 swf there is a movie clip called box_one, I would like to append a image to box_one, and only have the swf added to stage after the image file has been added to box_one.
i'm porting an old AS2 project to AS3, And have encounter a problem. I've tried a few different things but had no success.in AS2 when dynamically attaching a MC from the library i would sometimes use an array. the array would hold linkage reference's, like so;
ActionScript Code: var mc:String = state_ar[currentState]; this.container.attachMovie(mc,mc,this.getNextHighestDepth());
I am working on a game and want to reward the player with an animation at the end of a level. I have created a time and added the animation to the stage but I cannot figure out how to remove the animation once the timer has completed. Code: Select all/* Simple Timer Displays a countdown timer in the Output panel until 30 seconds elapse. This code is a good place to start for creating timers for your own purposes.
Instructions: 1. To change the number of seconds in the timer, change the value 30 in the first line below to the number of seconds you want. var celebration:Celebration; var fl_TimerInstance:Timer = new Timer(1000,30); fl_TimerInstance.addEventListener(TimerEvent.TIMER, fl_TimerHandler); fl_TimerInstance.removeEventListener(TimerEvent.TIMER, removeTimer); fl_TimerInstance.start(); [Code] .....
Adding / removing children (could be 10 times every few seconds)These children also have several animations associated with them
or
Adding all children once, and simply placing them out of stage view, and calling them back when needed to the stage (these will be still be running through their animation sequence while offstage, or they can be stopped) child.x -= 10000;
I have a Movie Clip object with a timeline, and it has 3 layers: a layer to stop the timeline at the last frame, a layer with regular drawing with mask attribute and a layer containing a target movieclip with the instance named 'target', that is masked by the layer above.
The drawing is very simple, not even a movieclip, just vector drawing. It's supposed to show the target movieclip only on regions where the mask layer has some drawing, right?
So, I created the method to load an image, listen to the complete loaded event and add the image to the target masked movieclip, but it disappears after the first frame! If i delete the layer with the mask drawing, works fine.
...I would like to override whatever function that adds the children to the parent Group and add them to the child viewstack instead but I can't seem to find where the adding occurs. Breakpoints in addChild and addElement shows that they are not called during the add.
I know it is possible to make instances/children interact with other objects by adding an eventListener to each child/instance.But how do you make a random instance/child interact with another random instance/child?Example: let a bunch of spaceships get damaged by a bulletrain by using addChild to place both spaceships and bullets on the stage.
I'm making a OSX-finder-type file browser in CS4.The Structure for the folder and files is being generated by a PHP in a XML, heres an example:(sorry the xml is not sorted, but the command i'm using in php doesn't sort it)
I'm trying to have a class file which can add objects to the stage via addChild; however, when I call addChild from within the class file, I get the error "1180: Call to a possibly undefined method addChild." I've tried importing flash.display.* and that doesn't fix the problem. Does the class file have to extend Sprite or MovieClip to be able to add objects to the stage?
In this game attached I need the old Children (rats) to hurt the character when he walks into them, however only the most recently added Child is active in that way... also the rats seem to appear above the character instead of below, is there any way to resolve these issues??
I have a Sprite called pageContent. Inside pageContent are 12 more Sprites with unique names, a couple of Buttons, and some TextFields. Inside each of the 12 Sprites I have either one or two TextFields and one TextInput. My question is, since they are children inside a child of pageContent, how can I access them? Here is how I am trying to do it:
[Code]...
In my mind, this should totally work. But surprise, surprise, it doesn't. I have debugged it and it works fine for the first two lines, but when it tries to get numChildren of a Child of pageContent (line 3), I get this error: PHP Code: 1119: Access of possibly undefined property numChildren through a reference with static type flash.display:DisplayObject.
I have downloaded Box2d ([URL]) and created a project that looks like this: [URL]. catalyst is the green cube and it has the base class "shapes.box", it is inside "world" which has the base class "wck.World". What i want to do is to add another "catalyst" from the library inside "world" when i click on add_btn. I tried to accomplish this by this code:
[Code]...
Symbol 'buttons', Layer 'Actions', Frame 1, Line 41061: Call to a possibly undefined method addChild through a reference with static type Class.
I want to have a rollover effect of a movieclip (mo1) inside a movieclip (mo) of another movieclip (popup1).Is it possible to do that? I try calling it using this code in the frame 1 of my flash, am i doing wrongly?
