ActionScript 3.0 :: An EnterFrame Event And A Timer Conflict?
Apr 15, 2010
I have a hitTest on an enterFrame event that adds a movieClip.I then want the movie clip to be on a timer that changes it to another movieClip.As you can imagine, there is a conflict because the hitTest always finds the original Mc an so over-rides the timer.I know this is a logic problem but I cant seem to figure it out.I am pretty sure I am thinking about this the wrong way.here is some of the code:
//this is the hitTest
this.addEventListener(Event.ENTER_FRAME,leftPillarHit);
function leftPillarHit(ev:Event):void {
[code].....
View 1 Replies
Similar Posts:
Jan 8, 2011
I have been developing a game using Flex, and used the Timer class to keep the main loop going. However, when I tried using the enterFrame event to do the main loop, there were a few problems. First of all, physics simulation seemed way too fast. Is the enterFrame event called more than once per frame? I set the application's global frame rate to 24, so shouldn't the application set off the event every 1/24 of a second? And the second problem is that when the game runs like this, some MXML components that are added are not shown.
View 2 Replies
Feb 7, 2010
I'm in the final stages of a project, and I am in trouble for not having bigger tests on lower end computers. It's a game, and frame rate may vary for low end computers on certain intensive parts. This creates a de-sync with the Timer class as it counts real seconds, unrelated to the fps.The frame rate is 30. Bugs start to occur on anything <20, specifics don't matter, but I should have expected that. And now I should fix that.
What would you suggest? I could write an enterframe timer class (counts frames, won't go desyncd). This means I'll have many enterframes events (opposing many Timers right now) - is this significant, cpu-wise? How is it in comparison?Btw this occurred to me as I tried the application on my N900, didn't really expect it to run properly but the device's a beast and it did. Everything worked, slowly but worked, except the fact things got out of sync.
View 1 Replies
Dec 3, 2009
Is it true that the timer class uses an enterframe handler to check it's delay?
View 1 Replies
Aug 31, 2010
i am moving from AS3 and Java to Expression Blend/WPF, but cant seem to figure out how to replicate EnterFrame event in C#, is there a update() or frameUpdate() function.
View 2 Replies
Sep 8, 2010
I'm an artist, not a developer, but I work with various media. I am so~so with AS3 and JS and a total noob with PHP and databases.Anyway, I am writing a Class based on keyboard events and I am finding that if the keys are hit too fast the triggered events don't complete.I'll explain further:I have a picture broken into parts (a red background here, a blue stroke there, and so on). Each one of these elements is a Library Object, and they are all set to alpha=0, and each one in turn, is tied to a key on the keyboard. When the key is struck, the picture element goes to alpha=1, plays a sound, and starts tweening back towards alpha=0.
Code:
public class TypedImageV4 extends MovieClip {
public function TypedImageV4() {
[code].....
View 8 Replies
Oct 21, 2011
Im just start with AS3 and I saw in an example how to made a simple clock, but it is using enterFrame event, if my movie is working at 30fps, is a good practice use enterFrame for a second counter? Is there any other better function or better practice where I does not need to check 30 times in every second?
View 2 Replies
Feb 16, 2012
I am working on a very simple game in Flash. I want to make all the animations framerate agnostic, so that I can change the framerate without affecting the flow and speed of the game.I read somewhere that if you want to do that, you simply create a Timer object and attach an event listener to this timer.
What if I have many objects that have to listen to the same timer? See the code to understand what I am trying to do. At this stage nothing breaks, but the event does not fire.Here is the Main class, the one that runs on swf execution:
public class Main extends MovieClip {
private static var _stage:Stage;
private static var _timer:Timer;
[code]....
View 1 Replies
Mar 20, 2005
In the move function below, I'm attempting to have move return false, when it becomes true I want to delete this on enterframe event. In essence when the clips come to rest and the function is no longer needed delete the function call.
Code:
//Variable to store number of Clips desired
clipCount = 6;
xArray = new Array(179.1, 249.1, 321.0, 179.1, 249.1, 321.0);
yArray = new Array(145.0, 144.0, 145.0, 206.0, 205.0, 204.0);
//Interface Assembly
function build() {
[Code].....
View 1 Replies
Nov 19, 2009
I am trying to figure out how to get an enterframe event listener to stop. I created a simple example below, where a line spins around on stage until the user clicks on it. When they click on it, the user should be jumped to frame 2.
Code:
stop();
stage.addEventListener(Event.ENTER_FRAME,rotateIt);
line_mc.addEventListener(MouseEvent.MOUSE_DOWN,goSomewhere);
[code].....
However, when I run that code, I get the following error:
at test_fla::MainTimeline/rotateIt()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
Which tells me that the event listener is not being removed. I also tried putting the removeEventListener code on frame 2, which didn't work either.
View 6 Replies
Jun 15, 2010
i have linked a movie clipe and creating multiple copies of it through attachMovie().i want to used this enterframe event to change the alpha of all my movie clips from 100 to 0 and viceversa when i drag and drop the movie clip
waiting for reply
View 1 Replies
May 8, 2011
I'm using greensocks MP3Loader to play IntroMp3. I want to dispatch a custom event when the value of the MP3Loader.soundTime property is 3 (3seconds). I've done it with an enter frame event. the problem is that it dispatches the event more then one time. what is the better way to check that the MP3Loader.soundTime property is == to 3 and dispatch my event only one time?
Code:
IntroMp3.playSound();
addEventListener(Event.ENTER_FRAME,myFunction);
function myFunction(event:Event) {
[Code].....
View 3 Replies
Aug 11, 2011
I want change the HBox's style when click any object inside this HBox. I set handle for click event of HBox, and then I found it very difficult to select item in the combobox in this HBox.When I click the combobox, it drops down its item list, and HBox style changed, then combobox drop up very quickly, I have no time to select an item in the Combobox.Here is my codes, is there any way to avoid this problem?
<mx:Repeater id="itemRepeater">
<mx:HBox id="itemHBox" styleName="active" click="onItemClick(event);">
<mx:ComboBox id="cb1" dataProvider="{dp}" close="closeHandler(event);"/>
[code].....
View 1 Replies
Nov 3, 2010
This draws almost perfect circle:
ActionScript Code:
var _angle:Number = 0;
var _speed:Number = .1;
var _radius:Number = 100;
[code]...
but...... if I wanted the circle to be drawn faster and change _speed to lets say .7 the circle becomes a polygon. How to get the circle to be drawn fast so it looks like a circle?
View 9 Replies
May 22, 2011
how can i pause and resume a game when it has more than one Enterframe Event?
View 2 Replies
Sep 8, 2009
I'm using a custom event (HotEvent) to make the communication between a loaded swf and its container, but im getting some strange error if i set the event handler parameter type:
[Code]...
View 2 Replies
Jan 12, 2011
I am trying to create a simple play, stop, rewind. fforward controller. I have the slideShow and the Control in the same time line. As the enterframe event is nested inside a function it will rewind but then none of the other buttons will work as I am not able to removeEventListener for the enterframe event.
[Code].....
View 2 Replies
Jul 13, 2010
I want to run a function when a certain movieclip enter a specific frame. The problem is it run the function repeatedly. I only want it to run once each time the movieclip change from one frame to another is there an event Listener that does it ? (can't put the code on each frame of the movieclip to sloppy and long)
View 0 Replies
May 23, 2009
I created an full flash template website loading external swf.Lately, I managed to add a fake3D rotation with AS3 and CS4 to this global template with an enterFrame.some of my external swf use a vertical scroller also using an enterframe function base on the x / y position of the mouse, the scroller dont work anymore.Can't an enterframe swf loads another swf with enterframe function?
View 4 Replies
Jul 18, 2010
so today my question is how can we have 1 function triggered by both a Timer event and a Mouse event? 'm trying to avoid having to re-write/re-name a function just because I also have a Mouse event that triggers it and not just a Timer event.
Issue:
I have a addThis bubble fade in with icons on a button rollover, the addThis bubble will fade out after the timer is finished, but I also have a close button in that bubble which needs to use the same function that the timer uses. (want to avoid writing 2 exactly alike functions)
I'm hoping this there is an easy workaround for this like event:null or something.[code]./...
View 2 Replies
Jul 13, 2010
I have a little flash app that I have running constantly on my server (I made it an exe). It runs great for a few days, but then eventually it just stops.
Code:
trace("test1");
var myTimer:Timer = new Timer(5000, 1);
myTimer.addEventListener(TimerEvent.TIMER, getData,false,0,true);
[Code].....
The code above should call the function getData once after 5 seconds have passed. This works 99.99% of the time, but for some reason (usually after a few days of it running) it doesn't call the getData function.
I have verified this through trace statements. When it eventually fails, it traces out test1, test2..... then nothing else. No test3.
I'm assuming I need to add an event listener for the timer object to check if it fails for whatever reason. How do I do this?
View 4 Replies
Sep 21, 2010
i have a timer running infinitely time, and there are 2 things that can trigger the timer to stop and be removed, and both scenarios can occur, so I need to check if the timer is on before trying to stop and remove it. How can I check whether a timer exists and/or is running?
View 3 Replies
Jul 15, 2010
The timer code looks like this:
var buffer:Timer = new Timer(2000, 1);
buffer.addEventListener(TimerEvent.TIMER, later);
buffer.start();
function later(e:TimerEvent):void
I keep getting the message that the "Parameter Listener must be non-null".
I have another time that is identical except for the names, and that one works fine.
View 17 Replies
Feb 4, 2010
I have a timer event that updates certain things in my app (from a PHP Service) every 5 seconds. Every time this timer ticks, it makes the cursor blink to a clock and then back to the arrow. Since this is happening every 5 seconds, it gets pretty annoying. Is there a way for me to prevent the cursor from changing when the timer ticks?UPDATE: I've figured out a work-around by setting a custom cursor with high priority (I just made a .png with a cursor in it).
View 1 Replies
Feb 8, 2010
My meter looks great and the needle rotates in a loop. How do I add easing to it? The meter is built from a timer event. I want the needle to bounce at the end. Rather than just adding a variable, I need some control of when it happens so I can adjust it with the animation.
[Code]....
View 2 Replies
Jun 28, 2010
I just have a one quick question on Timer and TimerEvent (flash.events.TimerEvent & flash.utils.Timer) of Adobe Flex.I am currently working on a project wherein I need to occasionally change speed, stop and play an swf animation (loaded to a loader and instantiated as a ByteArray).Example, I have a moving car (swf animation) running at 40kph. Then I have a button which will change the speed by increments of 40kph. SO basically, whenever I hit the button, the playing car should change speed by the increment. The difficult part is, I already had this working in Adobe Flex but it doesn't change the speed yet. I mean, it only moves by the keyframe interval I set when I created the swf file on flash (which is, to say, 30 frame interval per keyframe).
So in short, I just need to make the speed change depending on how many increments I asked it to change. A colleague told me to use Timer and TimeEvent of Flex but I can't seem to quite get the hang of it since I'm still new to the ActionScript world.
View 1 Replies
Aug 24, 2009
How to use "cancelable" in TweenEvent properties..?
View 2 Replies
Sep 30, 2010
I have placed the code is on frame 3 of the timeline. I tried using trace to see if the bugChange function is executed and it is not. The bugTimer does not start and call the function for some reason. see the code below:
Code:
var colorC:ColorTransform = new ColorTransform();
var bugTimer:Timer = new Timer(5000);
bugTimer:addEventListener(TimerEvent.TIMER_COMPLETE, bugChange)
[Code]....
View 4 Replies
Mar 28, 2012
I've got a class that "Spawns" enemies to the display based on a timer. So if the timer is 3 seconds, such and such happens. The problem is that the function is firing the ENTIRE time the Timer says 3 seconds, instead of just once and for some reason I can't wrap my head around how to limit it to just going once. Logic Statements aren't showing to be my strong point.[code]Anything other than that shouldn't be relevant, the spawnZeroFormations() seems to be working perfectly. it's just being called far to often. The thing is it WAS working but then I rearranged code and deleted something and can't remember what it was.I tried wrapping the switch in a For loop, but it doesn't seem to do anything which is confusing in itself; but again Logic statements aren't showing to be my strong point.
View 2 Replies
Nov 9, 2009
My code is contained in a movie clip that plays an animation on roll over and reverses the animation on roll off. The reverse uses a timer that backs up a frame on the each time event. It works for the most part.
Problem: I tried to use watchTimer.stop(); to end the timer. But the eventListener that tracks timer events keeps triggering which I don't want.
Code:
var watchTimer:Timer = new Timer(30);
this.addEventListener(MouseEvent.MOUSE_OVER, foldUp);
this.addEventListener(MouseEvent.MOUSE_OUT, foldDown);[code]....
View 5 Replies
