I've made a working custom cursor, but a separate mc which was a draggable object with the default cursor now ignores the custom cursor.
my code:
stage.addEventListener(MouseEvent.MOUSE_MOVE, newCursor);
Mouse.hide();
rectangle2_mc.addEventListener(MouseEvent.MOUSE_DO WN, dragger);
rectangle2_mc.addEventListener(MouseEvent.MOUSE_UP , dropper);
[code]....
my name is carrumbus I am a long time reader and first time poster and i have a problem I apologize in advance if this question to too simple and ridiculous for your brilliant minds It's very basic action script, but i cant figure out why it's not working
Basically, i have an empty stage, but for 2 objects a custom cursor (using the onclipevent mouse move, cursor hide, startdrag etc) and a movie clip of a little man (stick figure for now) all i want to do is, when i bring the cursor to the man and hold down on him, the cursor will goto frame 2, which will make it appear that the man i sitting on the cursor. at the same time the man symbol will be invisible and draggable. so that when i release the drag, the man will be put down somewhere else.
[Code]...
startDrag(); seems to stop dragging once the mouse leaves the stage. Is there a way to set it to still drag when off the stage. The exhaustive search I've tried only says things about capture the event for the mouse leaving the stage, not continue any dragging or animation, etc. In more detail, I have a "flashlight" type sprite that covers everything with black, and allows the user to see a small circle of stage. The center of the circle is where the mouse is. When the mouse goes over the edge, half of the circle (or more depending on how fast the mouse moved) is still visible. I need it to at least move off stage completely.
View 3 RepliesI am making use of a custom cursor on itemRenderers in a List component. The custom cursor works just fine except when I mouse over the Text component which is a child of the itemRenderer at which point I get two cursors, the custom and an iBar one on top of the other.Here's the code:
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
[code].....
Is it possible to make a custom cursor with restraints (meaning you only see the cursor when you put your mouse in a certain spot, by defining both the max and min of the x & y), that is placed inside a movie clip; then make the movie clip move on the stage when you click certain buttons.
[Code]...
I want to create a flash movie which firstly loads a selection of images/objects into a portion of the frame. After this is complete, the user can then drag these objects onto another area and the object will be created where the user has chosen. The user can then drag another instance of the ojects onto the area.
For example, there is a background of a lake in one area. A selection of boat pngs are loaded in an area below the lake. The user can drag these boats and place them on the lake. They can drag a boat multiple times if they wish.
I'm working on an AS3 flash animation where I am using a custom cursor. At the end of the animation I want to default back to the regular arrow/hand cursor
View 7 RepliesI have a movieclip I'm dragging and dropping. When I drag the clip outside of the stage, it gets stuck in drag mode and when I bring the cursor back onto the stage it suddenly snaps back onto the cursors position and it continues to drag (basically screwing up my drag and drop sequence). What I'd like is for the clip to stop dragging and snap back to its original X and Y position whenever you drag it outside the SWFs stage. I tried to achieve this by adding a listener to the stage to listen for a MOUSE_UP event when the drag begins. But its not working and I keep getting errors.
Here is my code, it's all contained in a document class:
ActionScript Code:
//Add Event Listeners to MovieClip that is dragged
alarmLrg_mc.buttonMode = true;
[Code]....
Which I don't understand because dropClip isn't a property its a function. If anyone can explain how I need to modify my code to make the clip stop dragging or if I can constrain the drag so you can't drag it outside the stage in the first place that could perhaps work as well.
I have a movieclip I'm dragging and dropping. When I drag the clip outside of the stage, it gets stuck in drag mode and when I bring the cursor back onto the stage it suddenly snaps back onto the cursors position and it continues to drag (basically screwing up my drag and drop sequence). What I'd like is for the clip to stop dragging and snap back to its original X and Y position whenever you drag it outside the SWFs stage. I tried to achieve this by adding a listener to the stage to listen for a MOUSE_UP event when the drag begins. But its not working and I keep getting errors.[code]
Which I don't understand because dropClip isn't a property its a function. If anyone can explain how I need to modify my code to make the clip stop dragging or if I can constrain the drag so you can't drag it outside the stage in the first place that could perhaps work as well.
My application (AS3) uses Flash Player right-click zoom feature. However, when zoomed in I cannot drag when the cursor is over an image, navigation bar or active area.This makes the menu and several other pages impossible to navigate when zoomed in.The only option is for the user to zoom out and then zoom back in on the next area they want to look at.how default dragging can be enabled when cursor is over an image/ moviclip?
View 1 RepliesI would like to start drag objects which is located in stage.There is movie clips in the stage which also encloses so many objects.when i click on any of the object it should be startdraged..Do u have any solution?
addEventListener(MouseEvent.MOUSE_UP, targetMC);
function targetMC(MouseEvent:Event):void
{
[code].....
Can we drag two objects at the same time with the "StartDrag" script?I put in the first frame of my movie two "StartDrag"s but it always took in consideration one.
View 5 RepliesI am currently looking to see what the bounding are for the start drag method. And by the looks of it the bounding is set by passing the rect() object to the dragUpdater/ constructor. My question then is can you pass a custom drawn shape like a curve or what ever? By the looks of it you can not as specified by the adobe reference doc.
startDrag()method
public function startDrag(lockCenter:Boolean = false, bounds:Rectangle = null):void
So from this I would conclude that to have a custom drag path one would have to create a custom class.
I'm writting an interactive map of the city of Swansea. I'm using start drag to allow navigation aroud the map, but my custom pointer dies when ever you start to drag the map.
View 4 RepliesI am using a custom cursor for my flash app and when I have the cursor click button1 (menu_btn in the code) it goes to scene2 and when I click button2 (current_btn in the code) it goes back to scene1. The problem is that when I click on button2 it leaves an image of the cursor right there on the button. It doesn't happen on button1. It was suggested that I am calling "cursor = new Cursor();" and extra time, but I am not. The code is below.
[Code]...
The code for dragging an object with the mouse is known:
mc.onPress=function(){this.startDrag(false);};
mc.onMouseUp=stopDrag;
I tried to drag two objects at a time using
mc.onPress=function(){this.startDrag(false);mc2.st artDrag(false);};
mc.onMouseUp=function(){this.stopDrag();mc2.stopDr ag();}
But this seems to drag only the object, corresponding to the last parameter in the function
How shall I drag more than one object at a time?
I have need to simultaneously move a slider (called "shadeGrabber") movie clip and a mask. I'd like to do this by dragging the slider and seeing the mask move with it.
The example movie clip on the left (called "PICTURE_WIPE") is what I'm going for, but interactive instead. I'm working in the movie clip on the right (called "PICTURE_WIPE copy 2")
Here's my code, for quick reference (found on the "AS" in the "PICTURE_WIPE copy 2" movie clip:
[Code]....
I've been searching various sites and forums for a solution to this, but have so far found none, so I was hoping to ask for some advice on the subject.Basically I have a movieclip of a photoframe, and I'd like it so when the user clicks the edge of the frame, they can drag it around, while clicking the photo inside the frame will open a new window and show the photo in full view.Originally I thought I could accomplish this simply by using:(Note: Framemc is the main movieclip, with another mc called "Photo" inside which is the picture)[code]But this leads to an odd problem: When dragging the frame it works fine, but the user can also drag the "photomc" around too (like, the frame stays in place and doesnt move with it), thus removing it from the frame.Is there a way to tell the code to move only certain parts of the mc and not others?
View 1 RepliesI just wanted to know if there is a way to startdrag() multiple objects at once. I don't want to use the mousemove/enterframe + x And y offset method of dragging, but just use the built-in startdrag method. Making startdrag function multiple times with different objects didn't work.
View 3 Repliesi want to drag objects using startDrag() method only one direction either X or Y .
View 1 RepliesI have two drag-related questions. The first one is how to rotate an object by clicking and holding on it, then moving the mouse round in circles. Think of a clock face, and the user clicking and holding on one of the hands, then spinning it around. The centre point would be the part of the hand that's attached to the middle of the clock face, and the other end of the hand would be able to rotate 360 degrees around the face.
The second one (and not related to the first one, a separate query altogether) is how to drag something horizontally along the screen, but have it stuck at a certain speed. So if the user tries to quickly drag the clip from left to right, it will not reach the right instantly, but instead follow the cursor at a slow speed.
I have an extremely simple fla, that I wanted to add one thing to, but can't get it to work right. There are 5 layers, each one has 1 key frame and that's it.
1. "Actions" Layer
Code:
startDrag("mask", true);
[code].....
I have for a long time tried to get rods beeing placed side by side without overlapping after dragging. I don't succeed. This side shows that it can work: [URL]. I want my objects beeing placed side by side or over each other, not overlapping and no space between, just like in thos link.
Code:
var mcArray:Array = new Array();
var lastClicked:MovieClip;
function drag() {
this.startDrag();
lastClicked=this;
} function dragEnd() {
[Code] .....
I have several shapes on the screen implemented as movieclips.I need to allow the user to drug the objects with the mouse as well as to resize them (i.e. to change objects' _xscale and _yscale)To do every one of these tasks (drug, blow up and blow down) separately is a trivial task.
View 3 RepliesI have the following code:
package { import flash.display.Sprite; import flash.events.MouseEvent;import lib.CustomEvents.ItemLoadCompleteEvent;import lib.Room.Item;import lib.Room.ItemStruct;
public class DragTest extends Sprite{private var itemInstance:Item;public function DragTest(){var tempItemStruct:ItemStruct = new[code].......
I have used the same code with a normal clip and it works. When I use it with my own defined item it does not work. Here are the details.
itemStruct: containing the properties of the item to be made. item : Loads the itemstruct defined item and puts it in a movieclip (item is inherited from movieclip).Traces from the above code, show that only the mouseUp function works mouseDown does not work. Though the same code works fine for a simple movieclip.I have already tried
stage.addEventListener(MouseEvent.MOUSE_DOWN,mouse Down);
EDIT: I have tried put the mouseDown on stage again if I click outside the item and drag from stage it both mouseDown and Up seem to work. But If I click on the item and drag. Still no luck. I have also added the item as movieclip on stage.
EDIT: If I have a class called Items and it has a movieclip instance which is loaded from a url. The startDrag on item fails. If Items contains a movieclip which we initiate from a SWC (not load it) on Drag works fine. Now how to solve the issue where I have a class which has a movieClip loaded from outside.I have the following code:
package {
import flash.display.Sprite;
import flash.events.MouseEvent;
[code].....
I have the following code:
package { import flash.display.Sprite; import flash.events.MouseEvent;
import lib.CustomEvents.ItemLoadCompleteEvent;
import lib.Room.Item;
import lib.Room.ItemStruct;
public class DragTest extends Sprite
{
[Code]....
I have used the same code with a normal clip and it works. When I use it with my own defined item it does not work. Here are the details. itemStruct: containing the properties of the item to be made. item : Loads the itemstruct defined item and puts it in a movieclip (item is inherited from movieclip) Traces from the above code, show that only the mouseUp function works mouseDown does not work. Though the same code works fine for a simple movieclip I have already tried stage.addEventListener(MouseEvent.MOUSE_DOWN,mouse Down);
EDIT: I have tried put the mouseDown on stage again if I click outside the item and drag from stage it both mouseDown and Up seem to work. But If I click on the item and drag. Still no luck. I have also added the item as movieclip on stage.
i have an .as class that extends mx.containers.Canvas (it's a draggable border of a resizable component), it becomes draggable on MOUSE_DOWN and stops being draggable on MOUSE_UP, MOUSE_OUT and ROLL_OUT. before calling startDrag() i create a Rectangle to define the drag area, i also have a _dragging: Boolean variable to control if it's draggable at the moment. the problem is that when i click this border it jumps to a negative coordinate without calling startDrag or switching _dragging to true.
i've overriden get x, set x, get y, set y and move() methods in order to solve it but the only thing i got was the fact that position changes without calling coords setters or move(), but at the moment it's changed a getter is called and returns new (negative) value so my question is what happens on startDrag() and how to filter unwanted incoming coords values?
how can I drag a specific image without dragging all the other objects. The image to be dragged is exported dynamically from the library and activated on a mouse over. Here is the code:
function myImage(event:MouseEvent):void {
var img:BitmapData=new livery(0,0);
var MyImg:Bitmap=new Bitmap(img);
[Code]....
I have a bunch of draggable objects and I want to be able to rotate them. Is it best (possible?) to rotate them based on keypress or how might you go about this. Here is my keypress code so far ( draggin works - rotate doesn't )
[Code]...
