ActionScript 3.0 :: Stop Both Objects From Dragging?
Jun 11, 2010
I've been searching various sites and forums for a solution to this, but have so far found none, so I was hoping to ask for some advice on the subject.Basically I have a movieclip of a photoframe, and I'd like it so when the user clicks the edge of the frame, they can drag it around, while clicking the photo inside the frame will open a new window and show the photo in full view.Originally I thought I could accomplish this simply by using:(Note: Framemc is the main movieclip, with another mc called "Photo" inside which is the picture)[code]But this leads to an odd problem: When dragging the frame it works fine, but the user can also drag the "photomc" around too (like, the frame stays in place and doesnt move with it), thus removing it from the frame.Is there a way to tell the code to move only certain parts of the mc and not others?
View 1 Replies
Similar Posts:
Sep 22, 2009
I want to create a flash movie which firstly loads a selection of images/objects into a portion of the frame. After this is complete, the user can then drag these objects onto another area and the object will be created where the user has chosen. The user can then drag another instance of the ojects onto the area.
For example, there is a background of a lake in one area. A selection of boat pngs are loaded in an area below the lake. The user can drag these boats and place them on the lake. They can drag a boat multiple times if they wish.
View 4 Replies
Mar 20, 2011
The code for dragging an object with the mouse is known:
mc.onPress=function(){this.startDrag(false);};
mc.onMouseUp=stopDrag;
I tried to drag two objects at a time using
mc.onPress=function(){this.startDrag(false);mc2.st artDrag(false);};
mc.onMouseUp=function(){this.stopDrag();mc2.stopDr ag();}
But this seems to drag only the object, corresponding to the last parameter in the function
How shall I drag more than one object at a time?
View 7 Replies
Feb 15, 2010
I have need to simultaneously move a slider (called "shadeGrabber") movie clip and a mask. I'd like to do this by dragging the slider and seeing the mask move with it.
The example movie clip on the left (called "PICTURE_WIPE") is what I'm going for, but interactive instead. I'm working in the movie clip on the right (called "PICTURE_WIPE copy 2")
Here's my code, for quick reference (found on the "AS" in the "PICTURE_WIPE copy 2" movie clip:
[Code]....
View 4 Replies
Oct 16, 2010
I just wanted to know if there is a way to startdrag() multiple objects at once. I don't want to use the mousemove/enterframe + x And y offset method of dragging, but just use the built-in startdrag method. Making startdrag function multiple times with different objects didn't work.
View 3 Replies
Aug 13, 2011
i want to drag objects using startDrag() method only one direction either X or Y .
View 1 Replies
Aug 22, 2009
I have two drag-related questions. The first one is how to rotate an object by clicking and holding on it, then moving the mouse round in circles. Think of a clock face, and the user clicking and holding on one of the hands, then spinning it around. The centre point would be the part of the hand that's attached to the middle of the clock face, and the other end of the hand would be able to rotate 360 degrees around the face.
The second one (and not related to the first one, a separate query altogether) is how to drag something horizontally along the screen, but have it stuck at a certain speed. So if the user tries to quickly drag the clip from left to right, it will not reach the right instantly, but instead follow the cursor at a slow speed.
View 1 Replies
Jul 20, 2011
I have an extremely simple fla, that I wanted to add one thing to, but can't get it to work right. There are 5 layers, each one has 1 key frame and that's it.
1. "Actions" Layer
Code:
startDrag("mask", true);
[code].....
View 3 Replies
Dec 11, 2009
I have the following code:
Code:
lights1.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
lights1.addEventListener(MouseEvent.MOUSE_UP, dropIt);
lights1.buttonMode = true;
[code]...
I can start dragging the symbol no problem but no amount of clicking will get it to stop. Am I doing something wrong? Using Flash CS4 with ActionScript 3.
View 1 Replies
May 31, 2010
I have for a long time tried to get rods beeing placed side by side without overlapping after dragging. I don't succeed. This side shows that it can work: [URL]. I want my objects beeing placed side by side or over each other, not overlapping and no space between, just like in thos link.
Code:
var mcArray:Array = new Array();
var lastClicked:MovieClip;
function drag() {
this.startDrag();
lastClicked=this;
} function dragEnd() {
[Code] .....
View 2 Replies
Mar 18, 2011
I have several shapes on the screen implemented as movieclips.I need to allow the user to drug the objects with the mouse as well as to resize them (i.e. to change objects' _xscale and _yscale)To do every one of these tasks (drug, blow up and blow down) separately is a trivial task.
View 3 Replies
Feb 25, 2012
I have a function that recognizes the ESC key being pressed. At which point, I want to stop dragging all items.
I"ve tried this.stopDrag() but it wont override the MOUSE_DOWN event.
It there a way to force it to "drop" the item being dragged?[code]...
View 1 Replies
Feb 7, 2010
how can I drag a specific image without dragging all the other objects. The image to be dragged is exported dynamically from the library and activated on a mouse over. Here is the code:
function myImage(event:MouseEvent):void {
var img:BitmapData=new livery(0,0);
var MyImg:Bitmap=new Bitmap(img);
[Code]....
View 1 Replies
Jul 22, 2002
I have a bunch of draggable objects and I want to be able to rotate them. Is it best (possible?) to rotate them based on keypress or how might you go about this. Here is my keypress code so far ( draggin works - rotate doesn't )
[Code]...
View 5 Replies
Jan 31, 2009
I've made a working custom cursor, but a separate mc which was a draggable object with the default cursor now ignores the custom cursor.
my code:
stage.addEventListener(MouseEvent.MOUSE_MOVE, newCursor);
Mouse.hide();
rectangle2_mc.addEventListener(MouseEvent.MOUSE_DO WN, dragger);
rectangle2_mc.addEventListener(MouseEvent.MOUSE_UP , dropper);
[code]....
View 1 Replies
Feb 28, 2011
I have Sprites that I want to have move around when I click and hold them and stop when I release them. I have methods that add Event listeners to the Sprites:[code]My problem is: when I click on the Sprites, as soon as I move the cursor, the Sprite's registration point snaps to the cursor, and when I release the mouse the Sprite doesn't stop following the cursor. I initially thought it was a problem with pixel collision. I thought the cursor wasn't touching anything on MOUSE_UP, but that proved to be false after I experimented. I even replicated the exact same Event adding and handling methods by starting another project and found that I wasn't having this problem. The test Sprite was simply dragging and dropping like usual, not snapping to the registration point, and being dragged by the point I clicked.
The only difference I can see, and also my only suspicion, is that the Sprites in my original code are being added to a Sprite, which is then being added to the stage, whereas the Sprite in the test project is being added to the root DisplayObject. I'm thinking that somehow the Event propagating down to the container Sprite and dragging and dropping that without dropping the other Sprite. The weird snapping I'm seeing might be the cursor snapping to the object behind the other sprite. Another important thing: when I drop a Sprite on top of another Sprite, that Sprite stops moving like I want it to, but still trails the registration point.
View 1 Replies
Aug 29, 2010
I have a movieclip I'm dragging and dropping. When I drag the clip outside of the stage, it gets stuck in drag mode and when I bring the cursor back onto the stage it suddenly snaps back onto the cursors position and it continues to drag (basically screwing up my drag and drop sequence). What I'd like is for the clip to stop dragging and snap back to its original X and Y position whenever you drag it outside the SWFs stage. I tried to achieve this by adding a listener to the stage to listen for a MOUSE_UP event when the drag begins. But its not working and I keep getting errors.
Here is my code, it's all contained in a document class:
ActionScript Code:
//Add Event Listeners to MovieClip that is dragged
alarmLrg_mc.buttonMode = true;
[Code]....
Which I don't understand because dropClip isn't a property its a function. If anyone can explain how I need to modify my code to make the clip stop dragging or if I can constrain the drag so you can't drag it outside the stage in the first place that could perhaps work as well.
View 8 Replies
Aug 28, 2010
I have a movieclip I'm dragging and dropping. When I drag the clip outside of the stage, it gets stuck in drag mode and when I bring the cursor back onto the stage it suddenly snaps back onto the cursors position and it continues to drag (basically screwing up my drag and drop sequence). What I'd like is for the clip to stop dragging and snap back to its original X and Y position whenever you drag it outside the SWFs stage. I tried to achieve this by adding a listener to the stage to listen for a MOUSE_UP event when the drag begins. But its not working and I keep getting errors.[code]
Which I don't understand because dropClip isn't a property its a function. If anyone can explain how I need to modify my code to make the clip stop dragging or if I can constrain the drag so you can't drag it outside the stage in the first place that could perhaps work as well.
View 2 Replies
Oct 5, 2011
startDrag(); seems to stop dragging once the mouse leaves the stage. Is there a way to set it to still drag when off the stage. The exhaustive search I've tried only says things about capture the event for the mouse leaving the stage, not continue any dragging or animation, etc. In more detail, I have a "flashlight" type sprite that covers everything with black, and allows the user to see a small circle of stage. The center of the circle is where the mouse is. When the mouse goes over the edge, half of the circle (or more depending on how fast the mouse moved) is still visible. I need it to at least move off stage completely.
View 3 Replies
Jul 2, 2010
is it possible for flash to detect off-stage mouse coordinates in order to continuously drag an object within its bounds while the mouse is moving outside of the stage? for example: i have a draggable red square on my stage. the stage is the bounds of the drag. if i drag the red square to the bottom of the stage and continue to drag outside of and around the stage, i'd like the red square to continue moving within it's bounds, following the mouse coordinates. currently, dragging halts as soon as i leave the stage and the red square only begins to move with the mouse coordinates if i reenter the stage bounds.
View 2 Replies
Dec 27, 2011
how can i stop the object from dragging when the object was already dropped to its target =)
here is my code :
var pointsCtr:Number=0;
s1_mc.onPress = function()
{
s1_mc.startDrag(false);
[Code].....
View 3 Replies
Jan 22, 2010
How to stop objects looping in Flash CS4? I have created logo with motion tween. But all my objects are animating continuously. I want each object animate only once then stop animating.
View 6 Replies
Apr 11, 2010
When I implement the hitTest all the objects stop flying. Is it becaus too much is happening and the CPU has to think - I don't think so - my game is so basic. By the way, somewhere along the line I will use loops and arrays but at the moment I know what's going on in my code.
[Code]...
View 12 Replies
Mar 10, 2009
I have about 4 or five objects moving around the screen. when I rollover one of the objects, I need all the objects to stop moving... when i move the mouse away from the abject, all objects on the screen need to start moving again.
View 1 Replies
Oct 27, 2010
Does anyone have any knowledge (preferably with links to make it official) about how/if Flash/Flex culls objects not in view, to stop them getting drawn when not needed? A specific cases: I have an 800x600 panel (a Canvas or Sprite, or other container) containing loads of Sprites representing individual game objects like asteroids or spaceships or missiles or map-tiles. The game world might be 5000x5000 so can I naively position Sprites anywhere in this range and let Flash cull them effectively? Or do I need to manage visibility somehow at a higher level (like manually removing them from the parent) to avoid performance issues?
View 1 Replies
Jun 12, 2009
I thought I had a handle on the timer class (even just a beginners understanding), but I'm having trouble with it.I have an event listener for the timer and it starts fine i get a delay, then a tween,but when I place a myTimer.stop();in the fuction the listener called (to stop it) it dosent stop.it will repeat placing the first image, and then call the first function again
......Wait its placing the first image in (a couple of lines before the start), so Its restarting the whole movie, not just the function?
myTimer.addEventListener(TimerEvent.TIMER, tweenone)
myTimer.start();
function tweenone (event:Event):void[code]...........
View 6 Replies
Aug 26, 2009
I have a contact form for which I have a tween. That contact form consists of two keyframes, first the form, I tried putting the code stop(); in the first keyframe but it didn't stop. I then changed stop(); to _root.stop();, which didn't work either. I have to stop it because otherwise users would see a thank you note before they even enter their details. What can I do? Converting to movieclip didn't work either, besides it puts a funny character when I press AltGr
View 2 Replies
Jan 16, 2011
Internally Flash obviously keeps a list of the primitives drawn using Graphics so I wondered if you have many such primitives in a Sprite, can you re-position/remove/alter individual items rather than clear and re-draw everything? Or is this deeper into the bowels of Flash than you're allowed (or recommended) to go?
View 4 Replies
Mar 4, 2012
I'm using Zend AMF to send my remote objects to Flex. I've defined a Constant class and created getASClassName() method. Then I've created Action script class in flex.
Objects are send successfully, but they are deserialized to generic Objects in Flex instead of specific ones. EDIT: On network monitor in Flex I can see that AMF value is set to com.my.project.valueobjects.Constant. Although array from event.result contains Objects.
[Code]...
View 1 Replies
Apr 27, 2010
I have an array of temporary objects created in a for loop. The objects are of type class "Tile", a class I created. However, it appears that whenever I create a lot of tiles in the for loop, the program slows down indefinitely.
While the array is whiped at a later trigger point, I am thinking that perhaps these Tile objects are not being erased from memory. They are being created on the fly in a for loop, and the array is being reset to "array = []".
Are the objects still in memory or are they cleaned up when the array is set to []?
View 3 Replies
