ActionScript 3.0 :: Display Layers One After Another And Have Everything Show?
Dec 12, 2010
Right now I have the typical timeline where I have several layers but the problem is all the content doesnot display permanently after its run through the timeline.For example layer 1 will play then disappear and then layer 2 will play through and disappear.Is there an ActionScript that I can have for example layer 1 play through and display permanently then layer 2 plays and does the same thing, layer 3... so on and so forth one after the other until all the images are shown?
View 1 Replies
Similar Posts:
Nov 14, 2009
I purchased the Adobe CS4 Web Premium for the MAC and a Flash template from ozzu.com. The template contains 201 items in it's library but it's only showing 13 layers in the timeline. When I create a new layer, it display a blank "Layer 61", so I'm assuming there are 60 layers created for the template by the original template designer. When I test the movie, it shows all the buttons, pages, images, text, etc. But when I go to Control and Play, it only displays whatever is in the 13 layers, that is, only a tiny portion of the entire template. How do I display all the images, buttons, text, etc.in the timeline so that they will show up in the Stage area?
View 5 Replies
May 14, 2009
I have an animation that shows items highlighted in a diagram. As the items are highlighted, the audio will play (to explain the animation). because we are creating this for people with possible disabilities, we also created captions with text for the audio. So, in separate layers, we created speech bubbles and text that is synchronized to the animated actions on the screen. this will also be synchronized with the audio. We want to have a button (close captioning button) that when users press it, they see the text captions and if they press it again, they don't see the text captions. my questions are
1) what will be the easiest way to create the effect i am looking for?
2) what actionscript command will i need for the button's actions?
View 14 Replies
Jun 28, 2011
I have 2-3 layers in my movie clip and i wanto access them using ActionScript code. I want to show hide and access Elemts(buttons, text box) in that layer.
So how can i do that using ActionScript-3
View 2 Replies
Dec 6, 2005
is there a way to hide/show layers on the click on a button?
View 2 Replies
Nov 18, 2007
I need to show and hide multiple DIV layers by clicking on buttons inside an embedded flash movie. I looked around and the closest I got was this tutorial here:
[URL]
but the problem is I need 10 buttons to each show one layer while hiding the other ones. For example, I click button 1, layer 1 shows, then I click on button 5, layer 1 is hidden and layer 5 shows etc.
How can the above code be split so instead of showing all DIV layers at once, it shows one and hides the rest??
View 5 Replies
Dec 12, 2010
Right now I have the typical timeline where I have several layers but the problem is all the content doesnot display permanently after its run through the timeline.For example layer 1 will play then disappear and then layer 2 will play through and disappear.
Is there an ActionScript that I can have for example layer 1 play through and display permanently then layer 2 plays and does the same thing, layer 3... so on and so forth one after the other until all the images are shown?I've searched all over but every ActionScript code pauses the entire timeline.
View 4 Replies
Sep 10, 2005
the snow effect always acts like the top layer, ok what i mean is, i have 3 layers, (1)toplayer= a car, (2)middle= snow, (3)low= background.I want to make the snow to be seen behind the car...i hope you understand what i mean , whenever i put the code from the link above it acts as the top layer and appears in front of everything.
View 4 Replies
Apr 3, 2010
How to display images in center in xml slide show
I have created a flash animation using tutorial on [URL] The problem I am facing is my images are of different size, so how to display images in center.
I have used this code, it displays images in center in IE but in firefox it displays half image
if (picture._alpha<100) {
picture._alpha += 10;
picture._x = (Stage.width/2) - (picture._width/2);
picture._y = 40;
}
View 1 Replies
May 14, 2010
so apparently with the new update in IE8, it starts up with NO add-ons. Since I cannot program a code to turn on add-ons in a browser, I need to show a message when this occurs. Much like an image has alternative text in the event the image doesn't load...how can I add a message that states:
You are using Internet Explorer 8+ and need to turn on your add-ins like FLASH Player. This site is optimized for Mozilla Firefox or Google Chrome.
View 1 Replies
Nov 3, 2011
I have an object that is instantiated, then placed into a property within a singleton (single instance) object. When a button is clicked an event is dispatched carrying a payload that references the display object that is held within the Singleton. When the event is heard, my view object adds the object to the display list e.g. addChild().The Item shows. Now If I hit another button an event is dispatched, and a new item is added to the display list via the method above and is seen. The 1st object is removed from the display list Here is my problem. When I click the button to load the 1st Object the above process is executed again but the object does not show.
I can run trace statements from the object that is supposed to be visible and they run fine. I even do a check to see if the visible property is set to true, and it is, but not object is on my screen. Code for this process.
//custom event carries the name of the page aka display object. this is a string
dispatchEvent(new MenuEvent(MenuEvent.CHANGE_VIEW_STATE, event.payload));
//When the event is heard, the following condinial is run
[code].....
View 3 Replies
Apr 20, 2011
How to show success message in frontend....when a record is inserted in backend.
View 2 Replies
Mar 17, 2012
I need to display a "What's new in version x.x" Dialog with a checkbox to allow users to not show the dialog on future launches. Can anyone help me by telling me what I need to look up in the api, or possibly an example?
View 1 Replies
Feb 21, 2011
The site operates around a swf named main.swf. All the different content areas are external swfs called by a navbar in main.swf. One of the primary content areas is a gallery of our work, with five separate types; branding, package design, collateral, Internet, and Digital. The left hand swf for the Gallery section contains five movie clips that let you select the specific gallery area that displays on the right hand side. Included in the right hand area are thumbnails (movie clips) that when clicked she wants a Greybox-like slide show to appear over the entire area (1100x x 690), INCLUDING the main.swf. As I currently envision it, this is an 1100 x 690 XML-driven portfolio swf, with the alpha of the overall stage box at about 30%, and the actual gallery centered.
If I haven't lost you, my challenge is to call the slide show swf from a click event in the thumbnail on the right hand side. If I understand the Display Object Model this swf is about three levels removed from the stage.
How do I call the slide show swf that must be added ABOVE the main swf in the Display List from a click on the right hand area thumbnail?
I'm gaining a better understanding of classes, and am using them to hold all the AS for the external swfs. Basically I need to be able to talk to the main swf from the brandRight.swf which is the right hand swf containing the thumbnails.
View 9 Replies
May 12, 2005
I've got a button and an empty movie clip. Id like to show 4 photos in a random way but without repeating it till all of them are shown first.[code]...
I don't know how to create an array and on every Random number you check if the new Random number is already in the array. If not, you put that value in the array. If it is already in the array...you generate a new Random number. When the array contains all numbers.
View 1 Replies
Apr 13, 2009
I have a movie clip that displays an embedded html with a bunch of divs that are expected to hide and show other divs when the users click them. i.e. imagine that you have a span with an instruction in javascript to show a div when you click it. I already made the html file, the external css and the external js. The movieclip (in actionscript 3.0) loads and displays the html content and also the css, but i haven't managed to figure out how am i supposed to link or use the javascript to do the trick. I've tried so far doing an exhausting research over the internet for the past few days and the only infromation i've got is that web developers use externalInterface to access javascript functions, but they use flash buttons to execute the js code, and it appears to me that i cannot use or embed flash btns in my site. I don't know, I'm kinda new to flash and this is the first time I work with actionscript 3.[code]or how do I achieve de hide/show thing with another method? I'll be wandering around the site in case you have any extra doubts about this subject.
View 2 Replies
Oct 22, 2008
Is it possible to add layers, re-order layers, move movieclips from layer to layer or specify which layer a duplicate movieclip appears on at runtime with AS3?I am aware of the depth properties and the functions associated with that but it would be easier to have a concept of a layer because I am dealing with masks.I have a nasty feeling I'm gonna be told that layers don't really exist within an swf and that depths and setmask are all there is to work with.
View 4 Replies
Jan 23, 2012
In my flex datagird i have a checkbox and a datgrid with seven columns. im populating values in first five column(remaining two column no values) of datgrid by an Arraycollection. now,By clicking the checkbox i want to show all seven column values and if i uncheck five columns has to show... how its possible?? heres my code
[Code]...
View 1 Replies
Mar 9, 2004
I'm fairly new to ActionScript and was wondering if anyone had an idea how this effect was done:[URL]..Click on a show date and the link zooms up and fills the screen giving show info. Then when you click the back button it shrinks back to where it was on the calendar.
View 3 Replies
Aug 26, 2010
how I embed a html5 video player only if there's flash in the browser? If there is flash in the browser I want to use it instead.
View 2 Replies
Jun 10, 2011
In my asp.net application,I want to show the .ppt file using the slide show manner.
That's to say,user can upload .ppt file to my server side,then other people can browser these ppts in the page ..
Since I have googled "embed powerpoint in web page" ,it seems that there is not a good idea to implement this and support the cross browser,so I thought the flash.
This is a slide show using the flash: [URL]
What I want is show the contents of the .ppt in this manner(it would be better if it support the animations in the ppt)?
View 1 Replies
Apr 27, 2006
I have one MC that he has an gray color, when I compel it, it is gray, everything is fine so far. I had to create one param in the HTML pra to be able to change at any time of the MC color ex:"meuFlash.swf?&cf1=ff3300>...", any time that I change this MC color , my MC change too. I create this. [AS]new Color (fundo_mc.fundos_mc).setRGB (parseInt (cf1, 16));[/AS] My problem is the following one, when I speak in the HTML that I do not want to use this color "ff3300", I only want to use "meuFlash.swf?...", mine MC are all black, it are not of the gray color that I already had left, I do not know because it is all black.
View 2 Replies
Jun 9, 2009
Whenever I add a new layer, it seems to be linked to my 1st layer.If I delete something on the stage on the new layer, it's also deleted from the 1st layer. If I try locking the 1st layer, anything on the new layer-although not locked itself -can't be selected.
View 2 Replies
Mar 22, 2011
I've made my site with photoshop and all images are in *.*png, saved with transparency and in the same resolution 1000x750. I exported them into my working file in Flash. No problems here.I've started to put each of the images in separate layers and in stacking order I wish, still no problems.Now, I am about in 20th layers I am inserting the image, again in separate layer and what happened? The layer will cover over the layer which is almost at the bottom. Meaning...only the trasparency which is very strange.
View 3 Replies
Oct 8, 2009
When using Loader class to load display objects (bitmaps, SWFs...) from remote URLs, is there any way for them to be instantiated (referenced as we know, by Loader::content property) as some user specified valid subclass? For example if I had a class that extended a Bitmap, is there any way for the loaded object to be of this class?
View 9 Replies
Oct 21, 2009
I am a complete rookie in ActionScript2.0/Flash.I just started learning regarding a project. My problem is I want to display data from MySQL in a DropDown Menu in Flash. the SendAndRecieve functionality only aids us to receive any responses,right?(Please correct me If I am Wrong.
View 2 Replies
Feb 5, 2011
I have tried to fix this error but I just cant get it to work.
View 2 Replies
Mar 13, 2009
I am trying to make an animation in which different layers (=images) come into the stage, then stay in place and other layers move in and stay as well. I have done 2 of the layers so far, converted them into movie clips, tweened them etc. When I run the cursor along the timeline, I see the desired result on the stage, ie everything comes in at the right time and stays in place. However, when I export it to view the film, only the first layer comes in, moves into place and stays there, and then nothing happens, ie the second layer never comes in.
I've tried everything I can think of, moving the layers around etc, and have deleted and redone the whole thing many times in an attempt to fix this, but I simply don't know what is wrong.
View 4 Replies
Jan 11, 2010
I need to covert multple layers with multiple frames in one scene into a movie clip. I then need to dump this movie clip into another scene. I need to do this many, many times. What is the easiest, fastest way?
View 1 Replies
Jun 8, 2009
I'm animating a brick path forming brick by brick.I used a single brick symbol and repeated it over and over until it formed a path.The file was a lot larger than I expected it to be since I used really only one brick. Does the fact that I have a slew of layers explain why my file is on the heavier side?Would the file be smaller if I used a single image of a complete brick path and animated a mask to reveal one brick at a time?
View 2 Replies
