ActionScript 3.0 :: Drag Pic Off Stage And Load Next?
May 18, 2010
I have a picture gallery and I'm trying to figure out how to bring on the next picture by dragging the one currenly on the screen off of the screen to the left. Im not looking for the code exactly but just an explaination of the sequence of code or some kind of quazy code so I get the idea.
If you want me to post my gallery code I can do that. its just a bit long. Currently it works with using "next" and "back" btns I just have not been able to change it to work with startDrag etc.
View 2 Replies
Similar Posts:
May 2, 2009
I'm trying to create a photo gallery and thumbnails in Flash. I've completed the following:
1.Open a New Flash document (action script2.0).
2.Properties Panel to change the size of the stage to 600x400 pixels and set the frame rate to 16 frames per second.
3. Select all of your images and thumbnails and imported them to the Library.
4. Rename the 1st Layer to masterclipmc
5.Select Rectangle from the Tool Bar and draw out a box.
6. Align the rectangle to the stage CTRL "K" by selecting "to stage", then vertically and horizontally center align.....
View 2 Replies
Jan 20, 2011
I have developed a simple drag and drop learning object, which works exactly as I intend it too except for one small problem. I have a selection of labels and each one has its own X and Y variables; now when I drag a label if I hit the target then it is dropped into place and if I miss my target it calls the Number variable for the X and Y of the MovieClip and it snaps back to its original co-ordinates - great.
The problem I have found is when I drag the label holding down my left hand mouse button towards the edge of my stage, as my mouse cursor holding the label passes from inside the stage to outside I lose my hand icon and the label is in limbo until I bring it back into the stage but then I am forced to drop the label just inside the stage and the X and Y variable no longer holds the original co-ordinates of the MovieClip, but is overwritten it seems to the new co-ordinates near the edge of the stage, so the snap back goes to the edge of the stage and not where it should. I have gone down the route of creating a rectangle bound to keep the label within the stage but as I hit the bound it unfortunatley acts in much the same way as when I drag outside the stage.
I understand that AS3 is listening out for a MOUSE EVENT and that it cannot listen when the cursor is outside the stage; I have come across the MOUSE LEAVE function would this work? I basically want my code to detect when the MovieClip has been dragged outside the stage and automatically snap it back to the co-ordinates held within the X and Y variables and stop dragging letting the user try again.
View 5 Replies
Aug 24, 2009
I have a movieClip on stage.I wanted to make it so that you can click on stage and drag and if you drag up and right value increases and if you drag down and right value decreases.So that I can resize the movieclip (scaleX & scaleY) based on that dragging.
View 2 Replies
Jul 28, 2010
I have 4 movies that need to be loaded in sequence. The first movie loads the second one, the second one loads the third, then the third one loads the fourth. What I can't figure out is how to make sure there's only one movie loaded at any time. I've tried removeChildAt(0) and other methods. What's the best way to load a movie to the stage and wipe out what was on the stage?
View 4 Replies
Mar 17, 2009
I dragged and dropped my movie clip on to the stage, and it doesn't play. Other movie clips play, but the one I need to use doesn't play. I even added a function that is supposed to play the clip when you click on another clip, and it doesn't work although others do. I've attached the fla for reference, the clip that I'm trying to use is wipe3.
View 1 Replies
Nov 12, 2009
Is there any possible way that you could drag and drop the stage itself? I mean, Id rather not have to make a bounding box for what could be an infinite number of images randomly placed on and off the stage's view.
View 4 Replies
Sep 25, 2009
Everything appears to work correctly, my images are loaded and land on the stage where I want them, but I can't drag them. It seems like the event listener (that i've highlighted) isn't being applied. As a side note, I've done this same thing with loading items from the library, and it works. I copied a lot of the the code from my test project to this one and when I load the bitmaps instead of pulling them from the library, it breaks.
package {
import flash.display.MovieClip;
import flash.display.Bitmap;
import flash.display.Loader;
import flash.events.*;
import flash.net.URLRequest;
public class Main extends MovieClip {
[Code] .....
View 5 Replies
May 6, 2010
We are the developers of a complex Flash component (url...) which worked without issues on Flash CS3 and CS4. Now, in Flash CS5 (both Mac and Windows versions) we have found a couple of problems at author-time
-1- After installing the mxp file containing the component, when trying to drag the component from the Components panel to the stage, or to the Library panel, it doesn't work. There's no way to import the component!
-2- If we open an existing FLA (created with Flash CS4), the component doesn't show correctly at author-time: you only get a black frame, instead of the expected result (it should show a white background with a logo in the middle). When compiling, everything works fine.
View 2 Replies
Jun 28, 2011
I'm having difficulty getting a photoshop document logo onto the flash stage. I've tried dragging the psd layer onto the stage and also tried importing through flash as a jpeg but no matter what I do, my image has a white box around it which makes any animations look discouragingly terrible. How can I best get multiple psd text layers and also a seperate psd layer that's a portrait cutout without having a white box around the image. All I want to do is make a banner with a gradient background that glows while a portrait cutout glides from the left and text layers appear from the right. What would be the best frame rate for this type of simple animation?
View 1 Replies
Jun 29, 2007
Been working on this for days and can't quite get it. Place a standard playing card or something similar on your desk in front of you. Lightly press your finger onto a random point on that card and drag it around your desk. See how it rotates towards the direction you are moving and such? I want to simulate that behavior.
View 8 Replies
Jun 15, 2010
I'm facing difficulties trying to drag and drop dynamic MC when their registration point go out of the stage.I'm using Tweener easing, and when this happens I get errors coming from Tweener and also from the stage.listeners..
View 2 Replies
Sep 7, 2010
I'm making a mockup for a client and I need to Load the .swf with the exact stage size so the graphic elements do not float outside the loaded movies stage area. [URL]Basic load code I'm using...
Actionscript Code:
import flash.display.*;var adLoader1:Loader = new Loader();adLoader1.load(new URLRequest("100828_budlight_texas_fight_728x90_jn.swf"));adLoader1.x = 313;adLoader1.y = 162;addChild(adLoader1);var adLoader3:Loader = new Loader();adLoader3.load(new URLRequest("100828_budlight_texas_fight_300x615_jn.swf"));adLoader3.x = 738;adLoader3.y = 0;addChild(adLoader3);
View 3 Replies
May 12, 2010
I am trying to distort a bitmap, I mean, I have this bitmap in the main stage and I want to drag a section to. I don't know, maybe drag the eye of the character in the picture but I want all the bitmap to react or at least the closest region of the point I am dragging. Is that possible? I know the drawTriangles() that is been use to gave this 3D effect, but I need something different.
View 3 Replies
Jul 14, 2009
I need to limit dragging when user drags out of the Stage. [code]...
View 1 Replies
Oct 27, 2010
I can drag a checkbox to the stage and change the width in the property inspector and it works fine. If I target the width when attaching it dynamically, the whole box and label get skewed.
View 0 Replies
Feb 6, 2011
Basically imagine a stage with 1 question on it and 3 possible answers. All the answers are draggable and the correct answer must be dragged to the answer area. If the wrong answer is dragged it bounces back... The problem (which in my opinion seems quite basic) is when the correct answer is dragged onto the answer area, I can't get it to do much. I can run a trace and that works so I know its setup correctly but I think i'm coding it wrong within the IF statement. My entire code for the correct answer is kept in a seperate as file and I have listed it below:
package code {
import flash.display.MovieClip;
import flash.events.MouseEvent;
import flash.geom.Point;
public class Three extends MovieClip {
[Code] .....
The bit where it says " if ( dropTarget.parent.name == "answer" )" I'm presuming is where the code has to go. I want to either goto a frame label within the main timeline which says "Congrats" kinda thing OR the other way I can think is adding a movie clip to the stage with the congrats msg in.
View 1 Replies
Dec 20, 2009
I'm making a game for children where they have to pay money by dragging it on a square. It al works wel only when i pick the first coin of one euro without going over the coin of 2 euro and then pick up a 2 euro coin the one euro disappears. after then it all works fine. i cant remove my duplicate euro's from the stage when i clic on pay here is my code for the euro's the euro's are in a emty movieclip
[Code]....
View 1 Replies
Oct 3, 2008
I'm working with a fellow coder on a project; he's the Flex guy and I'm the Flash guy. He supplied me with a custom Component he built in Flex, to act as an API. It's working just fine for him when he runs it in Flex.
I installed the .swc file in my Components folder. When I open my Components window, I can see it sitting right there. However, I can't seem to drag an instance of it onto the Stage. It highlights in the window when I click it, as I drag it I can see the little dotted-outline box indicating that something's being dragged, but when I release it it disappears. Nothing on the Stage, nothing in the Library.
View 3 Replies
Jul 12, 2009
I'm new to actionscript but I'm trying to put together a little virtual pizza maker tool. The idea is you drag and drop the ingredients into a pizza base to make a virtual pizza. Here's what I've built so far using actionscript 3 [URL] I've had to make 6 instances of each ingredient, what I'd like to do is add a new instance to the stage when a button is clicked as in this demo.. [URL] Is it possible to add new instances to the stage and make them drag on drop like my first attempt?
View 4 Replies
Jul 6, 2010
I've got a large item on screen that can be dragged around by the mouse. I've simply put an invisible button on the item with:
on(press) {
this.startDrag();
}
[Code].....
but if I move the mouse pointer outside the stage area while dragging the item and release the mouse button the release is not detected and the drag stays activated and I have to bring the pointer back to the stage and click and release on the button again to stop the drag.
Is there a way to deactivate a drag when the mouse is released outside the bounds of the stage, perhaps by using a different method that doesn't rely on a button?
View 2 Replies
Jan 7, 2011
Does anyone have a print job script that I can use on a mouseclick over a symbol - I want to print a specific area on a stage based on a drag and drop scenario... once all the relevant_MC's have been dragged into position the person gets the option to print via a button. I've attached the SWF for a view of the end product - I only need to print the grey area in the middle - not the white (thats where the drag and drop items will sit when not in use).
View 0 Replies
Jul 28, 2010
I have simple file 550 x 450, in it there is one container 400x300, x:75, y:78. In the container I am loading images and there is drag and drop function for them. I also have added mask with size that matches the size of the container because when i load larger images i could move them. Everything is working fine, but If I set scaleX and scaleY to the container image, the drag and drop functionality is not working fine - I can't reach the edges of the picture.
Code:
with ( m_mask.graphics )
{
beginFill( 0x000000 );
[Code].....
It behaves like there is not enough space to move the image right, left, top or down.
View 1 Replies
Jun 25, 2010
'i am doing a game for children where users can drag and drop resize and scale movie clips on stage!The drag and drop is not an issue...
View 2 Replies
Feb 13, 2011
want to make drag and drop and catch page center to stage
View 2 Replies
Dec 17, 2010
I was working on a little code in which I am inserting a few movieclips within a scroll pane and then user is able to drag stuff(a movieclip) from stage to the movieclips inside the srollpane.
[Code].....
View 14 Replies
Mar 29, 2011
I am looking for a way to remove a movieclip from the stage when it is dropped (after a pause) and then have a new random movieclip appear at a specific point on the stage, which can then be dragged and dropped onto its own target (which repeats the process).
Code:
var movieArray:Array = new Array();
movieArray = ["Red", "Green" , "Blue"];[code].....
View 6 Replies
Dec 12, 2010
I've got this human figure that i want people to drag it to an outline of the human figure and when it snaps to it, it'll automatically load to a new scene. I've got this code thats working but how do i add the snap function and the execution to the next page?
[Code]....
View 0 Replies
Sep 30, 2009
I'm trying to drag a movieclip on stage, and with nine existing button instances, cause that movie clip to jump around and run at different labels (which are within the movie clip itself. I'm not sure what I'm doing wrong, but I get the error #2109 which says (similar error for each button):
[Code]...
View 5 Replies
Nov 17, 2010
I have been trying to develop a drag and drop Mr. Potato Head type game for a couple of days now. I am new to AS3 and I have hit a roadblock that I was hoping someone out there could help me get through. My game has 3 separate menus (mouths, hats, and eyes).Each menu is a nested MC which has several dragable objects. Unfortunately, when I move to the next frame on the timeline the object I drug out resets itself and disappears. Is there any way to keep a dragable object on the stage once it has been placed there? I think my problem is more of a logic and structure issue with the way that I set up the game rather than an issue with actionscript.
View 3 Replies
