ActionScript 3.0 :: Get Main Timeline To Stop In The Beginning On Button Press To Play And At The End Stop Again?
Feb 1, 2008
I just got Flash CS3. I'm trying to get my main timeline to stop in the begining, on button press to play and at the end stop again. In AS2, you would just put stop(); on the first keyframe and stop(); on the last key frame and program your buttons accordingly.
The stop(); does not work!!!! It's driving me crazy. What am I missing? I've gone through the tutorials in Flash and they don't work either.Also, if you have MovieClip that contains an animation and you don't want the movie clip to be on a continuous loop how do you stop it from playing. In AS2, I would put a stop(); on the last keyframe of the movieclip's animation. This also does not work in AS3.
i'm habing abit of problem with this code, its supposed to play pause and stop, the problem being that when i press stop then play it only plays from the last pause and not the beggining how to get it to play from the start after the stop button is pressed
[URL]about 30 seconds into this flash, there is an FLV of a computer screen. The problem is, when I pause the swf, the flv keeps going. How do I get around this?1. Is it possible to convert the flv to swf?OR2. Is it possible to control the flv from the main timeline?
I'm having the worst time figuring this out... Here is the movie I made: [URL] and I want it to stop, then when i press that circle, continue with the animation. right now i have a stop(); on frame 19 the button is named myBtn I have tried all kinds of myBtn.onRelease = Play() but when I do that, i get errors and it no longer stops...
I'm looking for some help regarding stopping sounds in Actionscript 3. Basically I'm making an interactive story game, basically a quiz game. On the main menu I have a narrator talking. What I basically want to do is have the track stop playing when you press the play button. I have the soundtrack playing already and the play button too. I just can't figure out how to get the sound to stop when I press the play button and it goes to the next scene.
I would like to create an image sliding effect using next and previous buttons. For example the sliding images on the homepage here: http:[url]....I know this is not in flash, but that's the effect I'm trying to create using flash.
I followed the help quoted below. However, when I press the Previous button to rewind the timeline, the movie clip does not stop. For example, if I am on image 3 in the slider and press the previous button...instead of going to image 2, it slides all the way back to image 1 without stopping.
Quote: ActionScript 2:Notice how, in the link to the example, all of the images/slides are the same size. Create a few of those before you begin.
1. Convert each image/slide to it's own Movie Clip, so that you can go always go back and adjust them if needed....as well as other useful reasons.
2. You only need 2 layers for now, Actions & Container. On frame1, add a stop action to the frame on your actions layer. Then, place all of your Movie Clips on the stage, on the Container layer. Line them up horizontally, edge-to-edge. Select them all and convert to a Movie Clip named "container".
3. On the Container layer, Insert A Keyframe > move the Container Movie Clip to the left so that the next slide is now in place on the stage > Right click in between the two Keyframes and choose "Create Motion Tween". You should have the animation from slide 1 to slide 2 now. Repeat this process for 2 -3, 3-4, 4-5 ......(don't worry about the reverse!)
4. We need to create buttons to go to the next and previous slide. Make a new layer called Buttons. Create 2 buttons, one for Next and one for Previous. These can be Movie Clips OR Buttons, just place them on the stage give one an instance name of "next_btn" & "prev_btn" (no quotes) for the other.
5. All that's left is to add some actions to a few frames on the Actions layer.
a) Add a stop action to every frame where the slide will be static (still), you should already have one on the first frame from step 2.
b) Now here's where the magic happens. If we test the movie now, the slides will just play and over. So add this code to the frame 1 on the Actions layer:
Code: stop();//already have this stop action, just add the below this.onEnterFrame = function(){[code]....
I am currently in the middle of making a "sniping" flash game. In the first level there are a series of moving targets which are also movie clips. Inside the movie clip there is a 7 frame animation of the target exploding. Inside that is a tween of the target moving up and down. And inside that there is a plain old button.
What I want to happen is when you click on the moving target it explodes and brings you to a new frame of the main timeline. (ex. Main Timeline frame #27) But I'm pretty sure it thinks I was to play the seven frame animation of it exploding and then go to frame 27 inside the movie clip, rather then frame 27 on the main timeline.
Here's what my AS looks like on the target (ActionScript 2.0 is what I'm using.)
on (press) { play(); } on (release){ gotoAndStop(27)}
So how do I make it explode and then take me to frame 27 on the main timeline?
give me the actionscript for a bar that has a play and stop button to play and stop frames in a flash movie. i would be gratefull if you could as i am really stuck
I am building a basic 6 page web site with each page labeled on the main timeline I have put the stop(); command on the very first frame of my timeline with the button commands below it - but when I test the movie - the whole clip just loops repeatedly - ignoring the stop
stop(); //main menu buttons home_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame);
I have an internal swf file play within a main swf file. At the end of the internal swf file timeline I want the timeline of the main swf to go to a certain frame and stop.
Flash MX- I have an internal swf file play within a main swf file. At the end of the internal swf file timeline I want the timeline of the main swf to go to a certain frame and stop.
I want to be able to stop a function from running by the press of a button. Is there such an inbuilt function? Like "stop function(myFunction);" or something..?
i'm trying to write the code for a flash animation which uses different movie clips and buttons.all the movie clips are in the same layer but i've written code to make all but one invisible when the animation loads.
i've then got buttons which are supposed to make the movie clips visible, but then disapear again after the clip has played.i want to be able to press one button to have one clip start playing, but then i want to be able to press another button which stops that movie clip and starts a new one playing.this is what i came up with but it doesn't work
on (press) { violin.stop(); harmonica.stop();[code]....
this script is from one of the buttons which is supposed to start the movieclip harmonica and stop violin playing.i've got the same code for violin but the other way round.when i press a button it works fine and plays the clip which then disapears (leaving a default clip which plays all the time visible) but pressing buttons to interrupt the clip and play another one don't work properly. the movie clips don't stop and reset when they are interupted. they kind of pause instead. when i go to play a clip that has previously been interrupted it starts from where it has been paused and not from the beginning
I have two arrows that control an animated movie clip that has words scrolling vertically. When you click on one arrow it plays the movieclip forward, and when you click on the other arrow it plays the movieclip backward. I want you to have to keep clicking on the forward arrow to have it continue animating through the different words. I've place stop actions at the points I want the movieclip to stop animating but when you click the forward or backword button it never stops and just plays through the whole thing. [URL]
Have a question about the _root.stop(). I have a pause and play feature in a flash player so the user can stop the presentation along with all the voiceover that streams with the presentation. I used the _root.stop() in the flash player hoping it will stop the main timeline, but also other embedded movieclip timelines. It stopped the main timeline, but not the other ones. How do I stop both timelines at the same time? the _root.stop() was not working for me.
I have a problem with gotoAndPlay option.I have 2 layers with 3 keyframes, on 2nd frame i have movie clip image_mc which has a dropdown menu and here i will stop the timeline. On mouseover of image_mc I will get a dropdown in which if I click on 1st menu the timeline should go and stop on 3rd keyframe of main stage, but its going to 3rd frame inside movie clip, how to come out of mc on click.
So I have 2 frames at main timeline, one named "Game" and one is "Menu", they are just a movieclip eash does its own thing. I am in the "Game" playing, I want to change settings so I go to frame "Menu"... when I am back to frame "Game", everything is reseted!! I soon realized this is what Flash has been doing and it's a good thing... But I really want to know how to by pass the resetting now...
Okay, so I've got a happy little movie that shows an atom diagram. Every seven frames shows an electron popping up in the ring around the nucleus. This is all contained in a movie clip. I want a button that when pressed, tells the movie clip with the atom to advance the seven frames ( making an electron pop up ) and then stop. The same button if pressed again, will advance the movie clip an additional seven frames ( thus adding another electron ).
I've looked around quite a bit but haven't found a solution that will work for me. Also, I am working in AS2. (if you're feeling especially helpful, do you also know how to do the same but in reverse? I've found how to play movie clips in reverse, but not for a certain frame interval.)
Normally I have a 'MouseEvent.CLICK' on a movieclip handle this but I want use the keyboard instead of the mouse this time. I haven't used the keyboard for button actions since AS2, any tips on how I can do this in AS3?
Normally I have a 'MouseEvent.CLICK' on a movieclip handle this but I want use the keyboard instead of the mouse this time. I haven't used the keyboard for button actions since AS2, how I can do this in AS3?
my reverse button causes the timeline to ignore the stop() function on its keyframe and play backwards all the way to the start. Since it keeps trying to play the previous frame, it's frozen at frame 1.
Code:
stop() // Reverse button // var reverse:Boolean; rev_btn.addEventListener( MouseEvent.MOUSE_DOWN, down );
Im trying to tell my movie to goto and stop on anoter frame on my root timeline and then play a movie clip on the new frame... This is probs really simple but it is early.
I have added some three sound clips, play pause buttons, on the root timeline in a movie with corresponding callouts. I am able to stop all sounds on the main timeline by below
stop_btn.addEventListener(MouseEvent.CLICK, stopSound); function stopSound(event:MouseEvent) { SoundMixer.stopAll(); }
But now how do I resume all the sound to play. In sort, mute unmute root sounds in AS3.
I have my mp3 audio clip and made my play and stop button. I am using cs4 and as3. I want to have the play and stop button on my main page but still have the music play when the users clicks onto one of the buttons which takes them to a new page.
I have created two buttons for separate audio files. Essentially if you click on the button it will play and stop. This works great! I have also injected a SoundMixer.stopAll(); to ensure if you click between both buttons that it will stop the current audio file to play the next one. My problem is when I select the 2nd button for the first time everything seems to be working...it's when I attempt to click on the first button again, that it will require 2 clicks and then it stops and plays accordingly...anyone know how I could eliminate this annoying two click process?
Is it possible to play and stop a number of frames later, without using stop() in the frames? Like when I click a button frame 20 will start playing and it stops 30 frames later, all defined by the actions of the button..
