I am building a basic 6 page web site with each page labeled on the main timeline I have put the stop(); command on the very first frame of my timeline with the button commands below it - but when I test the movie - the whole clip just loops repeatedly - ignoring the stop
stop();
//main menu buttons
home_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame);
[Code]....
I just got Flash CS3. I'm trying to get my main timeline to stop in the begining, on button press to play and at the end stop again. In AS2, you would just put stop(); on the first keyframe and stop(); on the last key frame and program your buttons accordingly.
The stop(); does not work!!!! It's driving me crazy. What am I missing? I've gone through the tutorials in Flash and they don't work either.Also, if you have MovieClip that contains an animation and you don't want the movie clip to be on a continuous loop how do you stop it from playing. In AS2, I would put a stop(); on the last keyframe of the movieclip's animation. This also does not work in AS3.
[URL]about 30 seconds into this flash, there is an FLV of a computer screen. The problem is, when I pause the swf, the flv keeps going. How do I get around this?1. Is it possible to convert the flv to swf?OR2. Is it possible to control the flv from the main timeline?
View 7 RepliesI have an internal swf file play within a main swf file. At the end of the internal swf file timeline I want the timeline of the main swf to go to a certain frame and stop.
View 3 RepliesFlash MX- I have an internal swf file play within a main swf file. At the end of the internal swf file timeline I want the timeline of the main swf to go to a certain frame and stop.
View 3 RepliesI have a main timline with MCs in it. when the MC gets to the last frame, there's an onEnterFrame event telling the main timline to go back to frame 129 (labled "b1") and play.
I got the MovieClip(root).gotoAndPlay("b1"); part added to my function to call the root. however, when I test the movie, it does everything correct except play. it goes to b1 and stops. here's my as3:
code: this.addEventListener(Event.ENTER_FRAME,goBack);
function goBack(e:Event):void {
MovieClip(root).gotoAndPlay("b1");
}
why it won't play? I've tried using just the frame number and that won't help either. there's nothing else on the main timeline to stop the movie...
I have a very simple banner that I would like to play 3 times and stop. How can I do that in Actionscrip 3.0?
View 4 RepliesI`m experiencing problems with an XML menu. It works fine, but when I try to insert it into a mc other than the main timeline it stops working. I believe that I have trouble with the names of the mc (or instance name). could the "menu" in this string be a signifier for an instance (mc) ??
[Code]...
Code:
package {
import flash.display.MovieClip
import flash.events.Event
import flash.events.*
public class Main extends MovieClip{
Main is my document class, and player is a MC on the main timeline.
Have a question about the _root.stop(). I have a pause and play feature in a flash player so the user can stop the presentation along with all the voiceover that streams with the presentation. I used the _root.stop() in the flash player hoping it will stop the main timeline, but also other embedded movieclip timelines. It stopped the main timeline, but not the other ones. How do I stop both timelines at the same time? the _root.stop() was not working for me.
View 3 RepliesI have a problem with gotoAndPlay option.I have 2 layers with 3 keyframes, on 2nd frame i have movie clip image_mc which has a dropdown menu and here i will stop the timeline. On mouseover of image_mc I will get a dropdown in which if I click on 1st menu the timeline should go and stop on 3rd keyframe of main stage, but its going to 3rd frame inside movie clip, how to come out of mc on click.
View 1 RepliesSo I have 2 frames at main timeline, one named "Game" and one is "Menu", they are just a movieclip eash does its own thing. I am in the "Game" playing, I want to change settings so I go to frame "Menu"... when I am back to frame "Game", everything is reseted!! I soon realized this is what Flash has been doing and it's a good thing... But I really want to know how to by pass the resetting now...
View 2 RepliesI am new to actionscript. I was trying to make a slide show frame by frame. I have my main timeline with the following code in first frame.
stage.addEventListener(KeyboardEvent.KEY_DOWN, fl_changeSlide);
function fl_changeSlide(evt:KeyboardEvent):void{
if (evt.keyCode = 37) // LEFT{
gotoAndStop(this.currentFrame-1);
}else if (evt.keyCode == 39 || evt.keyCode == 32){
gotoAndStop(this.currentFrame+1);
}}
In the third frame I am trying to load an external swf by clicking a button 'rrbutton' and unload the same when the user clicks left arrow.
var loadit = new Loader();
function ack(evt.keyboardEvent):void {
if(evt.keyCode == 37){
loadit.unloadAndStop();
stage.addEventListener(KeyboardEvent.KEY_DOWN, fl_changeSlide);
[Code] .....
The external swf loads on clicking the button and unloads when left arrow is pressed and the main time line frame appears. But thereafter the keyboard navigation in the main timeline(through function fl_changeSlide) is not working properly.
Either the search function isn't working or no one has asked this but in all of my googling and section, I cannot find an answer to what seems to be an easy question. I have a nested movie clip. In the last frame of this movie clip I have a button that I want to gotoAndStop(21); to the main timeline but cannot figure it out. I have read this question asked several times while googling and not one answer surprisingly.
I have tried xxxx.gotoAndStop(21); with xxxx being parent, _parent, _main etc but there must be some way to do this I would think. If not via button then even just an action at the last frame that says to mainTimeline.gotoAndStop(21); Obviously mainTimeline is not correct but to give another example.
I am currently in the middle of making a "sniping" flash game. In the first level there are a series of moving targets which are also movie clips. Inside the movie clip there is a 7 frame animation of the target exploding. Inside that is a tween of the target moving up and down. And inside that there is a plain old button.
What I want to happen is when you click on the moving target it explodes and brings you to a new frame of the main timeline. (ex. Main Timeline frame #27) But I'm pretty sure it thinks I was to play the seven frame animation of it exploding and then go to frame 27 inside the movie clip, rather then frame 27 on the main timeline.
Here's what my AS looks like on the target (ActionScript 2.0 is what I'm using.)
on (press) {
play();
}
on (release){
gotoAndStop(27)}
So how do I make it explode and then take me to frame 27 on the main timeline?
Is there some codes, to stop sound in movie clip, when changing keyframe on main (parent) timeline ?
View 1 RepliesI have a home page and five other pages. The five pages have a main menu at the top containing buttons that allow you to go to the other pages:
on(release){
gotoAndPlay("gallery");
}
I have an actions layer. Each section has the following action in the first frame: stop(); When I view the website the home page works correctly. However, any page with the main menu automatically switches to the next page after about six seconds. The code seems pretty straightforward so I have no idea what I'm missing.
Is it possible to target a loaded movie within the main timeline and stop sounds in that particular movie only?
View 4 RepliesI searched the forum and perhaps found some relevant solutions, yet I still don't get it. How do I make simple "stop()", "play()", and check "currentFrame" on the main timeline from an AS3 Class file? I have an older AS2 Flash timeline animation that I'm converting to AS3, and also importing an AS3 swf into. Everything works fine, except I had to remove the "stop()" on the main timeline (so the animation does not loop), and trying to do that from the document main .as file. I get an error when trying to access "currentFrame" of the stage.
View 11 RepliesI am on the main stage. In a layer I create a button. I double click on this button to enter its layer. I then do some AS3 to say if the play button is pressed, to change to a pause button. How would I say "If the main timeline is finished, change to the play button"? I am trying
[Code]...
I have 3 functions in my main document class that I want to execute when the main timeline reaches a particular frame number. how do I do that?
see the code and comments
public function mainClass()
{
//stage declaraction
stage.align = StageAlign.TOP_LEFT;
[Code]....
why the timeline inside these movie clips and the timeline on the main scene have to correspond to work. [URL]
View 1 RepliesI cannot seem to find anything of what I need from google.(Well, I can find the reverse method to what i need ) Basically I wish to access a variable declared in the Root Timeline from my Movie clips timeline.
[Code]...
I simply want to assign a variable to the current frame of the main timeline (not movieclip timeline) I already know about _currentframe and it doesn't help in this case.
View 4 RepliesI added a website preloader in a separate scene to the main frame of my website and scripted it to go to and Play the main scene or frame of the website when finished loading. I then put a command in the first frame of the main scene for the movie to stop (); at that point. The problem is that now the buttons on the main page don't respond to any behaviour commands to go to and stop at other frames in the main scene. I'm not sure if this is a conflict between the stop(); command in the main scene and the button behaviour command to go to and stop at another frame or an error with the way I'm identifying the scene and frame.
View 5 RepliesI am in the learning process. Working with FlashCS5 and AS3. if the issue appears to be too simple for you. Placed a movieclip(mcassessJohn) on the main timeline and moved to the frame labelled "johnFeedback" in the movieclip timeline using the following actionscript code.
[Code]...
I have a file comprised of 1 scene and two movie clips. The clips are instanced into the Main Timeline and occupy Frames 1 and 2 respectively.MovieClip1 is an animation that has navigation buttons that appear at the end of the clip. I'm trying to get mouse click navigation to make Frame 2 on the Main Timeline active.
Here is what I'm trying but it is not working:
btExplore.addEventListener(MouseEvent.CLICK, ExploreClick);
function ExploreClick (evt:MouseEvent):void {
gotoAndStop(2);
}
this takes the animation to Frame 2 of the Movie Clip Timeline not Frame 2 the Main Timeline.
I'm having some problem with the workflow of flash.I make web banners everyday att my work att it is important to me to have the banners easy structured so I can copy effects, tweens and symbols to a new banner. I have Flash CS3 pro.I always start by making a symbols. And then in the symbols own timeline I make the animation or effect.
The big problem I'm having is when I have the main (scene1) timeline with many frames, and then have symbols on that timeline, with it's own timeline with some frames. The frames in the symbol timeline is okey, but at the main timeline the frames is too short or too long so the animation of the symbol cuts of early or it plays more than one time (too many frames).
How do I calculate how long a symbols timeline should be so It maches the main timeline?What happens to me is that I always have to adjust the symbols timeline and the main timeline, and this I have to do many times.
so here's the function on main stage:
[Code]....
and here's the code that wants to call this function in a another movie clip. I've attached this clip dynamicaly to the main stage as well.
[Code].....
How can i acess slideImage function on the main stage. in AS2 _root.slideImage(btnNumber); would work. How Would I do this in AS3?
I have a main.fla which has 3 movieclips inside it. All 3 mc's have timelines that run 40 frames. The main.fla timeline has each mc instance on a frame. mc_1 is on frame 1 mc_2 is on frame 40 mc_3 is on frame 81 as the main timeline plays the clips each one fades to the other. I need to know how to target this scenerio after mc_3 plays I need to have a goToAndplay (20) set up so the animation inside mc_1 starts playing (frame 20) of mc_1.
View 5 Replies